Package: linux-2.6
Version: 2.6.32-2
Severity: critical
Justification: breaks unrelated software

The previous kernel has probably a bug as I have /proc/mtd empty and no 
/dev/mtdblks! I will never be able to update a kernel unless
I mange to get access to the flash again!

-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-orion5x (Debian 2.6.32-1) (wa...@debian.org) (gcc 
version 4.3.4 (Debian 4.3.4-6) ) #1 Thu Dec 10 21:11:05 UTC 2009

** Command line:
root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none

** Not tainted

** Kernel log:
[    1.830978] SCSI subsystem initialized
[    2.070081] libata version 3.00 loaded.
[    2.121217] sata_mv sata_mv.0: version 1.28
[    2.126501] sata_mv sata_mv.0: slots 32 ports 2
[    2.132620] scsi0 : sata_mv
[    2.136257] scsi1 : sata_mv
[    2.139455] ata1: SATA max UDMA/133 irq 29
[    2.143553] ata2: SATA max UDMA/133 irq 29
[    2.654642] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.674963] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[    2.680972] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.705047] ata1.00: configured for UDMA/133
[    2.710028] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD502IJ  1AA0 
PQ: 0 ANSI: 5
[    3.224641] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.244954] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[    3.250961] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.275059] ata2.00: configured for UDMA/133
[    3.280044] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD502IJ  1AA0 
PQ: 0 ANSI: 5
[    3.988996] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 
GiB)
[    4.000695] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 
GiB)
[    4.009021] sd 0:0:0:0: [sda] Write Protect is off
[    4.013821] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.014846] sd 1:0:0:0: [sdb] Write Protect is off
[    4.019645] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.020060] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    4.030750] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    4.041650]  sda:
[    4.045454]  sdb: sdb1 sdb2 sdb3 < sda1 sda2 sda3 < sda5 sdb5 sda6 >
[    4.074979]  sdb6 >
[    4.096826] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.106922] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.741665] md: raid1 personality registered for level 1
[    4.865827] md: md0 stopped.
[    4.912739] md: bind<sdb1>
[    4.918791] md: bind<sda1>
[    4.954163] raid1: raid set md0 active with 2 out of 2 mirrors
[    4.960406] md0: detected capacity change from 0 to 254869504
[    4.982578]  md0: unknown partition table
[    5.084005] md: md1 stopped.
[    5.124792] md: bind<sdb2>
[    5.140764] md: bind<sda2>
[    5.177735] raid1: raid set md1 active with 2 out of 2 mirrors
[    5.183791] md1: detected capacity change from 0 to 20003815424
[    5.202647]  md1: unknown partition table
[    5.331970] md: md2 stopped.
[    5.375036] md: bind<sdb6>
[    5.395092] md: bind<sda6>
[    5.427737] raid1: raid set md2 active with 2 out of 2 mirrors
[    5.433798] md2: detected capacity change from 0 to 478842781696
[    5.453951]  md2: unknown partition table
[    5.900356] kjournald starting.  Commit interval 5 seconds
[    5.905971] EXT3-fs: mounted filesystem with ordered data mode.
[    7.472676] udev: starting version 149
[    8.082039] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    8.553294] lm75 0-0048: hwmon0: sensor 'lm75'
[    9.099274] MV-643xx 10/100/1000 ethernet driver version 1.4
[    9.155386] mv643xx_eth smi: probed
[    9.210116] net eth0: port 0 with MAC address 00:1e:58:a2:40:48
[    9.565020] usbcore: registered new interface driver usbfs
[    9.583629] usbcore: registered new interface driver hub
[    9.623698] usbcore: registered new device driver usb
[    9.726980] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.733609] orion-ehci orion-ehci.0: Marvell Orion EHCI
[    9.745718] orion-ehci orion-ehci.0: new USB bus registered, assigned bus 
number 1
[    9.774740] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
[    9.794702] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[    9.800745] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.807618] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    9.814867] usb usb1: Product: Marvell Orion EHCI
[    9.819571] usb usb1: Manufacturer: Linux 2.6.32-trunk-orion5x ehci_hcd
[    9.826210] usb usb1: SerialNumber: orion-ehci.0
[    9.831937] usb usb1: configuration #1 chosen from 1 choice
[    9.838490] hub 1-0:1.0: USB hub found
[    9.842335] hub 1-0:1.0: 1 port detected
[   10.791554] Adding 979924k swap on /dev/sda5.  Priority:-1 extents:1 
across:979924k 
[   10.827268] Adding 979924k swap on /dev/sdb5.  Priority:-2 extents:1 
across:979924k 
[   11.145229] EXT3 FS on md1, internal journal
[   11.554786] loop: module loaded
[   13.863214] kjournald starting.  Commit interval 5 seconds
[   13.885245] EXT3 FS on md0, internal journal
[   13.889547] EXT3-fs: mounted filesystem with ordered data mode.
[   13.975322] kjournald starting.  Commit interval 5 seconds
[   14.015240] EXT3 FS on md2, internal journal
[   14.019545] EXT3-fs: mounted filesystem with ordered data mode.
[   16.110293] RPC: Registered udp transport module.
[   16.115081] RPC: Registered tcp transport module.
[   16.119788] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.343668] Slow work thread pool: Starting up
[   16.348506] Slow work thread pool: Ready
[   16.354469] FS-Cache: Loaded
[   16.668115] FS-Cache: Netfs 'nfs' registered for caching
[   16.871938] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   17.082708] eth0: link up, 100 Mb/s, full duplex, flow control disabled
[   20.619001] NET: Registered protocol family 10
[   20.628928] lo: Disabled Privacy Extensions
[   24.470821] NET: Registered protocol family 5
[   31.414583] eth0: no IPv6 routers present
[   80.222859] svc: failed to register lockdv1 RPC service (errno 97).
[   80.244928] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery 
directory
[   80.253425] NFSD: starting 90-second grace period

** Model information
not available

** Loaded modules:
Module                  Size  Used by
appletalk              24225  20 
ipv6                  253113  16 
nfsd                  247688  13 
exportfs                3000  1 nfsd
nfs                   269386  0 
lockd                  63141  2 nfsd,nfs
fscache                34101  1 nfs
nfs_acl                 2277  2 nfsd,nfs
auth_rpcgss            33050  2 nfsd,nfs
sunrpc                171014  12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
loop                   11411  0 
ehci_hcd               32716  0 
usbcore               110784  2 ehci_hcd
evdev                   6582  0 
mv_cesa                 4648  0 
mv643xx_eth            22542  0 
nls_base                5367  1 usbcore
g760a                   2279  0 
lm75                    3783  0 
libphy                 14128  1 mv643xx_eth
aes_generic            32820  1 mv_cesa
gpio_keys               2655  0 
ext3                  110921  3 
jbd                    37426  1 ext3
mbcache                 4860  1 ext3
raid1                  19477  3 
md_mod                 80110  4 raid1
sd_mod                 30988  10 
crc_t10dif              1106  1 sd_mod
sata_mv                24205  8 
libata                133307  1 sata_mv
scsi_mod              119083  2 sd_mod,libata

** PCI devices:

** Sound cards:

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: armel (armv5tel)

Kernel: Linux 2.6.32-trunk-orion5x
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-trunk-orion5x depends on:
ii  debconf [debconf-2.0]         1.5.28     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.93.4     tools for generating an initramfs
ii  module-init-tools             3.11-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-trunk-orion5x recommends:
ii  firmware-linux-free           2.6.32-2   Binary firmware for various driver
ii  uboot-mkimage                 0.4        generate kernel image for U-Boot

Versions of packages linux-image-2.6.32-trunk-orion5x suggests:
pn  fdutils                       <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-trunk-orion5x is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  
linux-image-2.6.32-trunk-orion5x/postinst/missing-firmware-2.6.32-trunk-orion5x:
  
linux-image-2.6.32-trunk-orion5x/postinst/bootloader-test-error-2.6.32-trunk-orion5x:
  
linux-image-2.6.32-trunk-orion5x/postinst/bootloader-error-2.6.32-trunk-orion5x:
  
linux-image-2.6.32-trunk-orion5x/prerm/would-invalidate-boot-loader-2.6.32-trunk-orion5x:
 true
  
linux-image-2.6.32-trunk-orion5x/prerm/removing-running-kernel-2.6.32-trunk-orion5x:
 true
  
linux-image-2.6.32-trunk-orion5x/postinst/depmod-error-initrd-2.6.32-trunk-orion5x:
 false





-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to