Package: linux-2.6 Version: 2.6.32-21 Severity: normal connect() function that is hanging because SYNACK is not recieved resends SYNs only 2 times by default. But net.ipv4.tcp_syn_retries by default is equal to 5. If net.ipv4.tcp_syn_retries is equal to 6 then connect() resends SYN 3 times. The function getsockopt(IPPROTO_TCP, TCP_SYNCNT) returned the same value as net.ipv4.tcp_syn_retries.
-- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-21) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 15:39:44 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e710436e-0f84-4848-9bc7-0b6021edc2f8 ro yes quiet ** Tainted: W (512) * Taint on warning. ** Kernel log: [75498.137521] sky2 eth2: Link is down. [75498.160391] br0: port 1(eth2) entering disabled state [75499.832642] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [75499.833037] br0: port 1(eth2) entering forwarding state [75509.917468] sky2 eth2: Link is down. [75509.928388] br0: port 1(eth2) entering disabled state [75511.665631] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [75511.666043] br0: port 1(eth2) entering forwarding state [75514.961507] sky2 eth2: Link is down. [75514.972395] br0: port 1(eth2) entering disabled state [75516.642555] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [75516.642952] br0: port 1(eth2) entering forwarding state [79832.008036] sky2 eth2: Link is down. [79832.020411] br0: port 1(eth2) entering disabled state [79835.325751] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [79835.326147] br0: port 1(eth2) entering forwarding state [79835.754850] sky2 eth2: Link is down. [79836.340472] br0: port 1(eth2) entering disabled state [79837.411896] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [79837.412426] br0: port 1(eth2) entering forwarding state [80045.678841] sky2 eth2: Link is down. [80045.692443] br0: port 1(eth2) entering disabled state [80047.511940] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80047.512332] br0: port 1(eth2) entering forwarding state [80057.456285] sky2 eth2: Link is down. [80057.464931] br0: port 1(eth2) entering disabled state [80059.143111] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80059.143538] br0: port 1(eth2) entering forwarding state [80167.405953] sky2 eth2: Link is down. [80167.416424] br0: port 1(eth2) entering disabled state [80169.091461] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80169.091851] br0: port 1(eth2) entering forwarding state [80198.991249] sky2 eth2: Link is down. [80199.000936] br0: port 1(eth2) entering disabled state [80200.929114] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80200.929506] br0: port 1(eth2) entering forwarding state [80210.761441] sky2 eth2: Link is down. [80210.772931] br0: port 1(eth2) entering disabled state [80212.505220] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80212.505612] br0: port 1(eth2) entering forwarding state [80376.510530] sky2 eth2: Link is down. [80376.524422] br0: port 1(eth2) entering disabled state [80378.206144] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80378.206536] br0: port 1(eth2) entering forwarding state [80408.095830] sky2 eth2: Link is down. [80408.108987] br0: port 1(eth2) entering disabled state [80409.731843] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80409.732245] br0: port 1(eth2) entering forwarding state [80419.855446] sky2 eth2: Link is down. [80419.868437] br0: port 1(eth2) entering disabled state [80421.638206] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80421.638597] br0: port 1(eth2) entering forwarding state [80487.373675] sky2 eth2: Link is down. [80487.384438] br0: port 1(eth2) entering disabled state [80489.040318] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80489.040732] br0: port 1(eth2) entering forwarding state [80518.948878] sky2 eth2: Link is down. [80518.960925] br0: port 1(eth2) entering disabled state [80520.859592] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80520.859983] br0: port 1(eth2) entering forwarding state [80530.721367] sky2 eth2: Link is down. [80530.732935] br0: port 1(eth2) entering disabled state [80532.454078] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80532.454485] br0: port 1(eth2) entering forwarding state [80634.708853] sky2 eth2: Link is down. [80634.716985] br0: port 1(eth2) entering disabled state [80636.392888] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80636.393281] br0: port 1(eth2) entering forwarding state [80666.303817] sky2 eth2: Link is down. [80666.312939] br0: port 1(eth2) entering disabled state [80668.120414] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80668.120808] br0: port 1(eth2) entering forwarding state [80678.086545] sky2 eth2: Link is down. [80678.096938] br0: port 1(eth2) entering disabled state [80679.861648] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [80679.862038] br0: port 1(eth2) entering forwarding state [80998.468855] sky2 eth2: Link is down. [80998.484449] br0: port 1(eth2) entering disabled state [81057.995180] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [81057.995575] br0: port 1(eth2) entering forwarding state [81135.126046] sky2 eth2: Link is down. [81135.136445] br0: port 1(eth2) entering disabled state [81136.894742] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [81136.895135] br0: port 1(eth2) entering forwarding state [81140.633636] sky2 eth2: Link is down. [81140.644935] br0: port 1(eth2) entering disabled state [81142.283156] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [81142.283548] br0: port 1(eth2) entering forwarding state [81143.603064] sky2 eth2: Link is down. [81143.616462] br0: port 1(eth2) entering disabled state [81145.401905] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [81145.402295] br0: port 1(eth2) entering forwarding state [81214.792110] sky2 eth2: Link is down. [81214.800946] br0: port 1(eth2) entering disabled state [81217.980064] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [81217.980461] br0: port 1(eth2) entering forwarding state [81218.397545] sky2 eth2: Link is down. [81218.988897] br0: port 1(eth2) entering disabled state [81220.100313] sky2 eth2: Link is up at 100 Mbps, full duplex, flow control both [81220.100705] br0: port 1(eth2) entering forwarding state ** Model information sys_vendor: System manufacturer product_name: P5Q Premium product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1306 board_vendor: ASUSTeK Computer INC. board_name: P5Q Premium board_version: Rev 1.xx ** Loaded modules: Module Size Used by iptable_raw 1867 0 iptable_nat 4299 0 nf_nat 13228 1 iptable_nat nf_conntrack_ipv4 9753 3 iptable_nat,nf_nat nf_conntrack 46375 3 iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 iptable_mangle 2817 0 iptable_filter 2258 0 ip_tables 13675 4 iptable_raw,iptable_nat,iptable_mangle,iptable_filter x_tables 12685 2 iptable_nat,ip_tables des_generic 15475 96 cbc 2507 96 tun 10780 28 autofs4 20677 1 rpcsec_gss_krb5 8164 51 nfsd 253350 13 exportfs 3122 1 nfsd nfs 239834 3 lockd 57299 2 nfsd,nfs fscache 29818 1 nfs nfs_acl 2031 2 nfsd,nfs auth_rpcgss 33428 7 rpcsec_gss_krb5,nfsd,nfs sunrpc 160085 29 rpcsec_gss_krb5,nfsd,nfs,lockd,nfs_acl,auth_rpcgss 8021q 17062 0 garp 5050 1 8021q bridge 39486 0 stp 1440 2 garp,bridge ext4 288745 1 jbd2 66887 1 ext4 crc16 1319 1 ext4 fuse 49998 1 md_mod 73200 0 kvm_intel 38050 15 kvm 213672 1 kvm_intel hwmon_vid 1828 0 coretemp 4325 0 pci_stub 1309 0 firewire_sbp2 11418 0 firewire_core 36656 1 firewire_sbp2 crc_itu_t 1307 1 firewire_core loop 11623 0 radeon 572395 0 ttm 39986 1 radeon drm_kms_helper 20017 1 radeon shpchp 26232 0 drm 142199 3 radeon,ttm,drm_kms_helper pci_hotplug 21203 1 shpchp i2c_i801 7750 0 i2c_algo_bit 4225 1 radeon i2c_core 15328 5 radeon,drm_kms_helper,drm,i2c_i801,i2c_algo_bit parport_pc 18855 0 snd_pcsp 6579 0 parport 27682 1 parport_pc asus_atk0110 7686 0 evdev 7352 2 snd_pcm 60119 1 snd_pcsp psmouse 49777 0 snd_timer 15486 1 snd_pcm processor 30239 0 button 4650 0 snd 45918 3 snd_pcsp,snd_pcm,snd_timer soundcore 4566 1 snd snd_page_alloc 6217 1 snd_pcm serio_raw 3752 0 ext3 106326 2 jbd 36861 1 ext3 mbcache 5050 2 ext4,ext3 sg 18632 0 usbhid 33260 0 sr_mod 12250 0 hid 62809 1 usbhid cdrom 28631 1 sr_mod sd_mod 29553 5 crc_t10dif 1276 1 sd_mod ahci 32310 0 ata_generic 2983 0 uhci_hcd 18521 0 pata_marvell 2629 0 floppy 49087 0 e100 25860 0 skge 33500 0 ata_piix 21124 4 r8169 28877 0 mii 3210 2 e100,r8169 libata 133072 4 ahci,ata_generic,pata_marvell,ata_piix ehci_hcd 31119 0 scsi_mod 121717 5 firewire_sbp2,sg,sr_mod,sd_mod,libata sky2 39182 0 thermal 11610 0 thermal_sys 11942 2 processor,thermal usbcore 121650 5 usbhid,uhci_hcd,ehci_hcd nls_base 6377 1 usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:82d3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: c0000000-dfffffff Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:06.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e29] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fe000000-fe0fffff Prefetchable memory behind bridge: 00000000b0000000-00000000b00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 4800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 4880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 4c00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at bffffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00009000-0000cfff Memory behind bridge: fe300000-fe6fffff Prefetchable memory behind bridge: 00000000b0100000-00000000b02fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fe200000-fe2fffff Prefetchable memory behind bridge: 00000000b0300000-00000000b04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fe100000-fe1fffff Prefetchable memory behind bridge: 00000000b0500000-00000000b06fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 4080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 4400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 4480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at bffff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=32 I/O behind bridge: 0000d000-0000efff Memory behind bridge: fe700000-febfffff Prefetchable memory behind bridge: 00000000bef00000-00000000beffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 3000 [size=8] Region 1: I/O ports at 2c00 [size=4] Region 2: I/O ports at 2880 [size=8] Region 3: I/O ports at 2800 [size=4] Region 4: I/O ports at 2480 [size=16] Region 5: I/O ports at 2400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at bffff400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 4000 [size=8] Region 1: I/O ports at 3c00 [size=4] Region 2: I/O ports at 3880 [size=8] Region 3: I/O ports at 3800 [size=4] Region 4: I/O ports at 3480 [size=16] Region 5: I/O ports at 3400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] [1002:5b60] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:0083] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at a0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 5000 [size=256] Region 2: Memory at c0000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at dffc0000 [disabled] [size=128K] Capabilities: <access denied> 01:00.1 Display controller [0380]: ATI Technologies Inc RV370 [Radeon X300SE] [1002:5b70] Subsystem: ASUSTeK Computer Inc. Device [1043:0082] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Region 0: Memory at dfff0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 39 Region 0: I/O ports at 6800 [size=256] Region 2: Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at b0000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 03:00.0 Serial controller [0700]: NetMos Technology PCIe 9901 Multi-I/O Controller [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 7480 [size=8] Region 1: Memory at fe1fb000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at fe1fa000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 03:00.1 Serial controller [0700]: NetMos Technology PCIe 9901 Multi-I/O Controller [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 7800 [size=8] Region 1: Memory at fe1fd000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at fe1fc000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 03:00.2 Parallel controller [0701]: NetMos Technology PCIe 9901 Multi-I/O Controller [9710:9901] (prog-if 03 [IEEE1284]) Subsystem: Device [a000:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 19 Region 0: I/O ports at 7c00 [size=8] Region 1: I/O ports at 7880 [size=4] Region 2: Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at fe1fe000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: parport_pc 04:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b1) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8212] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 8c00 [size=8] Region 1: I/O ports at 8880 [size=4] Region 2: I/O ports at 8800 [size=8] Region 3: I/O ports at 8480 [size=4] Region 4: I/O ports at 8400 [size=16] Region 5: Memory at fe2ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: pata_marvell 05:00.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=05, secondary=06, subordinate=0c, sec-latency=0 I/O behind bridge: 00009000-0000cfff Memory behind bridge: fe300000-fe6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 06:01.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=06, secondary=07, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 06:02.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=06, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fe300000-fe3fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 06:03.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=06, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fe400000-fe4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 06:04.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=06, secondary=0a, subordinate=0a, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fe500000-fe5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 06:05.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=06, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe600000-fe6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 06:06.0 PCI bridge [0604]: Integrated Device Technology, Inc. PES16T7 PCI Express Switch [111d:802d] (rev 0d) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=06, secondary=0c, subordinate=0c, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 08:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) Subsystem: ASUSTeK Computer Inc. Device [1043:81f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 35 Region 0: Memory at fe3fc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 9800 [size=256] Expansion ROM at fe3c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) Subsystem: ASUSTeK Computer Inc. Device [1043:81f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 36 Region 0: Memory at fe4fc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at a800 [size=256] Expansion ROM at fe4c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 0a:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) Subsystem: ASUSTeK Computer Inc. Device [1043:81f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 37 Region 0: Memory at fe5fc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at b800 [size=256] Expansion ROM at fe5c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 0b:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) Subsystem: ASUSTeK Computer Inc. Device [1043:81f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 38 Region 0: Memory at fe6fc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at c800 [size=256] Expansion ROM at fe6c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 0d:00.0 Ethernet controller [0200]: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) [1186:4b01] (rev 11) Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) [1186:4b01] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at d800 [size=256] Expansion ROM at fe700000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: skge 0d:01.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152 [1011:0024] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Bus: primary=0d, secondary=0e, subordinate=0e, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe800000-febfffff Prefetchable memory behind bridge: 00000000bef00000-00000000beffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat+ DiscTmrSERREn- Capabilities: <access denied> 0e:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05) Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter [8086:10f0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at befff000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at ec00 [size=32] Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: e100 0e:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 05) Subsystem: Intel Corporation EtherExpress PRO/100+ Dual Port Adapter [8086:10f0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at beffe000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at e880 [size=32] Region 2: Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fe800000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: e100 ** USB devices: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 06da:0003 Phoenixtec Power Co., Ltd Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing') Architecture: i386 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.2 tools for generating an initramfs ii linux-base 2.6.32-21 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-21 Binary firmware for various driver ii libc6-i686 2.11.2-5 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-amd64 suggests: ii grub 0.97-63 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.26 Binary firmware for various driver ii firmware-linux-nonfree 0.26 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org