Don Zickus wrote, on 02/05/11 22:29:
On Sat, Apr 30, 2011 at 01:06:07PM +0930, Arthur Marsh wrote:
Yes, with plain 2.6.39-rc5-git2 I had problems with shutting down
and with "BUG: soft lockup - CPU#0 stuck for 63s!" errors.
After adding 'nmi_watchdog=0' I could cleanly shutdown and have not
seen any more "BUG: soft lockup - CPU#0 stuck for 63s!" errors.
Ok. That's good. Can I see the dmesg log when you boot with out
'nmi_watchdog=0'. I want to see the failure nmi watchdog spits out on
boot and what subsystem perf thinks it found (should be none).
This sounds like the softlock timer started and is hanging for some reason
because the nmi watchdog failed to start. I thought those issues were
fixed a while ago, maybe not.
Cheers,
Don
I hope that it is alright providing the dmesg log for 2.6.39-rc5-git4,
which I've attached.
Regards,
Arthur.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-rc5-git4 (root@am64) (gcc version 4.6.1
20110428 (prerelease) (Debian 4.6.0-6) ) #7 SMP Sun May 1 01:03:58 CST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000018000000 (usable)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.0 present.
[ 0.000000] DMI: /M6TBC, BIOS 4.51 PG 02/06/99
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x18000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000018000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0018000000 page 2M
[ 0.000000] kernel direct mapping tables up to 18000000 @ 17fc000-1800000
[ 0.000000] RAMDISK: 17295000 - 17c9b000
[ 0.000000] ACPI Error: A valid RSDP was not found (20110316/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 384MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 18000000
[ 0.000000] low ram: 0 - 18000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00018000
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00018000
[ 0.000000] On node 0 totalpages: 98191
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 736 pages used for memmap
[ 0.000000] Normal zone: 93472 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 18000000 (gap:
18000000:e7ff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @d6c00000 s27040 r0 d22112 u4194304
[ 0.000000] pcpu-alloc: s27040 r0 d22112 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 97423
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39-rc5-git4
root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro lapic
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 374164k/393216k available (2590k kernel code, 18600k
reserved, 1192k data, 360k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
[ 0.000000] .init : 0xc13b2000 - 0xc140c000 ( 360 kB)
[ 0.000000] .data : 0xc1287a0d - 0xc13b1a60 (1192 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1287a0d (2590 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=d6808000 soft=d680a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 267.242 MHz processor.
[ 0.008021] Calibrating delay loop (skipped), value calculated using timer
frequency.. 534.48 BogoMIPS (lpj=1068968)
[ 0.008212] pid_max: default: 32768 minimum: 301
[ 0.008516] Security Framework initialized
[ 0.008642] SELinux: Disabled at boot.
[ 0.008838] Mount-cache hash table entries: 512
[ 0.012054] Initializing cgroup subsys ns
[ 0.012159] ns_cgroup deprecated: consider using the 'clone_children' flag
without the ns_cgroup.
[ 0.012285] Initializing cgroup subsys cpuacct
[ 0.012411] Initializing cgroup subsys devices
[ 0.012506] Initializing cgroup subsys freezer
[ 0.012597] Initializing cgroup subsys net_cls
[ 0.012688] Initializing cgroup subsys blkio
[ 0.013061] mce: CPU supports 5 MCE banks
[ 0.013332] SMP alternatives: switching to UP code
[ 0.023476] Freeing SMP alternatives: 8k freed
[ 0.023980] weird, boot CPU (#0) not listed by the BIOS.
[ 0.024031] SMP motherboard not detected.
[ 0.024128] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.132054] SMP disabled
[ 0.132144] Performance Events: p6 PMU driver.
[ 0.132309] ... version: 0
[ 0.132395] ... bit width: 32
[ 0.132479] ... generic registers: 2
[ 0.132564] ... value mask: 00000000ffffffff
[ 0.132655] ... max period: 000000007fffffff
[ 0.132745] ... fixed-purpose events: 0
[ 0.132829] ... event mask: 0000000000000003
[ 0.134736] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.135073] Brought up 1 CPUs
[ 0.135169] Total of 1 processors activated (534.48 BogoMIPS).
[ 0.136162] devtmpfs: initialized
[ 0.139320] print_constraints: dummy:
[ 0.139870] NET: Registered protocol family 16
[ 0.174191] PCI: PCI BIOS revision 2.10 entry at 0xfb090, last bus=1
[ 0.174296] PCI: Using configuration type 1 for base access
[ 0.178934] bio: create slab <bio-0> at 0
[ 0.179645] ACPI: Interpreter disabled.
[ 0.180305] vgaarb: loaded
[ 0.180756] PCI: Probing PCI hardware
[ 0.180853] PCI: Probing PCI hardware (bus 00)
[ 0.181191] pci 0000:00:00.0: [8086:7190] type 0 class 0x000600
[ 0.181262] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
[ 0.181458] pci 0000:00:01.0: [8086:7191] type 1 class 0x000604
[ 0.181622] pci 0000:00:07.0: [8086:7110] type 0 class 0x000601
[ 0.181848] pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
[ 0.181968] pci 0000:00:07.1: reg 20: [io 0xf000-0xf00f]
[ 0.182105] pci 0000:00:07.2: [8086:7112] type 0 class 0x000c03
[ 0.182228] pci 0000:00:07.2: reg 20: [io 0xd000-0xd01f]
[ 0.182362] pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
[ 0.182391] * Found PM-Timer Bug on the chipset. Due to workarounds for a
bug,
[ 0.182405] * this clock source is slow. Consider trying other clock sources
[ 0.182755] pci 0000:00:07.3: quirk: [io 0x4000-0x403f] claimed by PIIX4
ACPI
[ 0.182886] pci 0000:00:07.3: quirk: [io 0x5000-0x500f] claimed by PIIX4 SMB
[ 0.183101] pci 0000:00:08.0: [1044:a400] type 0 class 0x000100
[ 0.183161] pci 0000:00:08.0: reg 10: [io 0xd400-0xd41f]
[ 0.183286] pci 0000:00:08.0: reg 30: [mem 0xee000000-0xee007fff pref]
[ 0.183397] pci 0000:00:09.0: [1102:0004] type 0 class 0x000401
[ 0.183461] pci 0000:00:09.0: reg 10: [io 0xd800-0xd83f]
[ 0.183621] pci 0000:00:09.0: supports D1 D2
[ 0.183710] pci 0000:00:09.1: [1102:7003] type 0 class 0x000980
[ 0.183770] pci 0000:00:09.1: reg 10: [io 0xdc00-0xdc07]
[ 0.183927] pci 0000:00:09.1: supports D1 D2
[ 0.184074] pci 0000:00:09.2: [1102:4001] type 0 class 0x000c00
[ 0.184144] pci 0000:00:09.2: reg 10: [mem 0xf0005000-0xf00057ff]
[ 0.184191] pci 0000:00:09.2: reg 14: [mem 0xf0000000-0xf0003fff]
[ 0.184340] pci 0000:00:09.2: supports D1 D2
[ 0.184368] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.184400] pci 0000:00:09.2: PME# disabled
[ 0.184554] pci 0000:00:0a.0: [10ec:8139] type 0 class 0x000200
[ 0.184620] pci 0000:00:0a.0: reg 10: [io 0xe000-0xe0ff]
[ 0.184667] pci 0000:00:0a.0: reg 14: [mem 0xf0004000-0xf00040ff]
[ 0.184775] pci 0000:00:0a.0: reg 30: [mem 0xef000000-0xef00ffff pref]
[ 0.184845] pci 0000:00:0a.0: supports D1 D2
[ 0.184872] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot
[ 0.184900] pci 0000:00:0a.0: PME# disabled
[ 0.185111] pci 0000:01:00.0: [1002:5964] type 0 class 0x000300
[ 0.185182] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.185228] pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
[ 0.185273] pci 0000:01:00.0: reg 18: [mem 0xed000000-0xed00ffff]
[ 0.185363] pci 0000:01:00.0: reg 30: [mem 0xec000000-0xec01ffff pref]
[ 0.185444] pci 0000:01:00.0: supports D1 D2
[ 0.185537] pci 0000:01:00.1: [1002:5d44] type 0 class 0x000380
[ 0.185599] pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.185645] pci 0000:01:00.1: reg 14: [mem 0xed010000-0xed01ffff]
[ 0.185786] pci 0000:01:00.1: supports D1 D2
[ 0.185927] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.186041] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.186075] pci 0000:00:01.0: bridge window [mem 0xec000000-0xedffffff]
[ 0.186110] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff
pref]
[ 0.189195] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.191044] pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
[ 0.191277] PCI: pci_cache_line_size set to 32 bytes
[ 0.191501] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.205267] pnp: PnP ACPI: disabled
[ 0.227025] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.227157] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.227275] pci 0000:00:01.0: bridge window [mem 0xec000000-0xedffffff]
[ 0.227388] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff
pref]
[ 0.227557] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.227588] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.227619] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.227648] pci_bus 0000:01: resource 1 [mem 0xec000000-0xedffffff]
[ 0.227678] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
[ 0.228149] NET: Registered protocol family 2
[ 0.228794] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.230893] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.232162] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.233277] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.233379] TCP reno registered
[ 0.233480] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.233656] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.234635] NET: Registered protocol family 1
[ 0.234860] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.235142] pci 0000:01:00.0: Boot video device
[ 0.235183] PCI: CLS 32 bytes, default 32
[ 0.235656] Unpacking initramfs...
[ 2.995774] Freeing initrd memory: 10264k freed
[ 3.105035] platform rtc_cmos: registered platform RTC device (no PNP device
found)
[ 3.107084] audit: initializing netlink socket (disabled)
[ 3.107273] type=2000 audit(1304382326.104:1): initialized
[ 3.225120] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.246837] VFS: Disk quotas dquot_6.5.2
[ 3.247598] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.248794] msgmni has been set to 750
[ 3.250858] alg: No test for stdrng (krng)
[ 3.251235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 3.251367] io scheduler noop registered
[ 3.251456] io scheduler deadline registered
[ 3.251720] io scheduler cfq registered (default)
[ 3.254312] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.256262] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.260285] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.262803] Linux agpgart interface v0.103
[ 3.263526] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 3.275207] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 3.276162] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.278683] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.278683] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.281432] mousedev: PS/2 mouse device common for all mice
[ 3.282415] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 3.282582] rtc0: alarms up to one day, 114 bytes nvram
[ 3.282748] cpuidle: using governor ladder
[ 3.282843] cpuidle: using governor menu
[ 3.285541] TCP cubic registered
[ 3.287670] NET: Registered protocol family 10
[ 3.293976] Mobile IPv6
[ 3.294074] NET: Registered protocol family 17
[ 3.294242] Registering the dns_resolver key type
[ 3.294458] Using IPI No-Shortcut mode
[ 3.295433] PM: Hibernation image not present or could not be loaded.
[ 3.295543] registered taskstats version 1
[ 3.296776] rtc_cmos rtc_cmos: setting system clock to 2011-05-03 00:25:27
UTC (1304382327)
[ 3.297172] Initializing network drop monitor service
[ 3.298296] Freeing unused kernel memory: 360k freed
[ 3.301189] Write protecting the kernel text: 2592k
[ 3.301498] Write protecting the kernel read-only data: 964k
[ 3.309452] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 3.872172] udevd[44]: starting version 168
[ 4.220532] Switching to clocksource tsc
[ 4.896998] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.897268] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip, use 8139too
[ 5.244823] PCI: setting IRQ 9 as level-triggered
[ 5.244869] firewire_ohci 0000:00:09.2: found PCI INT B -> IRQ 9
[ 5.245087] firewire_ohci 0000:00:09.2: sharing IRQ 9 with 0000:00:0a.0
[ 5.265689] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5.430409] firewire_ohci: Added fw-ohci device 0000:00:09.2, OHCI v1.10, 4
IR + 8 IT contexts, quirks 0x0
[ 5.587283] SCSI subsystem initialized
[ 5.631936] PCI: setting IRQ 11 as level-triggered
[ 5.631984] pci 0000:00:08.0: found PCI INT A -> IRQ 11
[ 5.637000] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.
[ 5.637119] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n, ip:n,
ep:n, pp:y.
[ 5.637246] EATA0: 2.0C, PCI 0xd410, IRQ 11, BMST, SG 122, MB 64.
[ 5.637346] EATA0: wide SCSI support enabled, max_id 16, max_lun 8.
[ 5.637444] EATA0: SCSI channel 0 enabled, host target ID 7.
[ 5.637556] scsi0 : EATA/DMA 2.0x rev. 8.10.00
[ 5.712369] 8139too 0000:00:0a.0: found PCI INT A -> IRQ 9
[ 5.712580] 8139too 0000:00:0a.0: sharing IRQ 9 with 0000:00:09.2
[ 5.719288] 8139too 0000:00:0a.0: eth0: RealTek RTL8139 at 0xd883c000,
00:05:1c:19:26:75, IRQ 9
[ 5.777993] usbcore: registered new interface driver usbfs
[ 5.779909] usbcore: registered new interface driver hub
[ 6.020157] usbcore: registered new device driver usb
[ 6.034380] libata version 3.00 loaded.
[ 6.127103] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.150736] ata_piix 0000:00:07.1: version 2.13
[ 6.161278] scsi1 : ata_piix
[ 6.168363] scsi2 : ata_piix
[ 6.168991] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 6.169105] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 6.184182] firewire_core: created device fw0: GUID 00023c0151066531, S400
[ 6.188991] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.189555] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 6.189894] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
number 1
[ 6.190146] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d000
[ 6.190598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.190716] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.190838] usb usb1: Product: UHCI Host Controller
[ 6.190934] usb usb1: Manufacturer: Linux 2.6.39-rc5-git4 uhci_hcd
[ 6.191035] usb usb1: SerialNumber: 0000:00:07.2
[ 6.193240] hub 1-0:1.0: USB hub found
[ 6.193376] hub 1-0:1.0: 2 ports detected
[ 6.340608] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66
[ 6.352592] ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100
[ 6.352709] ata1.00: 625142448 sectors, multi 0: LBA48
[ 6.353273] ata1.01: HPA detected: current 66055248, native 78242976
[ 6.353396] ata1.01: ATA-6: SAMSUNG SP4002H, QU100-57, max UDMA/100
[ 6.353502] ata1.01: 66055248 sectors, multi 0: LBA
[ 6.356460] ata2.00: configured for UDMA/33
[ 6.360633] ata1.00: configured for UDMA/33
[ 6.376538] ata1.01: configured for UDMA/33
[ 6.376744] scsi: waiting for bus probes to complete ...
[ 6.504201] usb 1-1: new full speed USB device number 2 using uhci_hcd
[ 6.666458] usb 1-1: New USB device found, idVendor=058f, idProduct=6362
[ 6.666575] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.666682] usb 1-1: Product: Mass Storage Device
[ 6.666778] usb 1-1: Manufacturer: Generic
[ 6.666870] usb 1-1: SerialNumber: 058F312D81B
[ 6.780253] usb 1-2: new full speed USB device number 3 using uhci_hcd
[ 6.944448] usb 1-2: New USB device found, idVendor=058f, idProduct=6387
[ 6.944564] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.944670] usb 1-2: SerialNumber: OGUN4WMN
[ 7.295847] scsi 0:0:6:0: Direct-Access IBM DCAS-34330W S65A
PQ: 0 ANSI: 2
[ 7.296002] scsi 0:0:6:0: cmds/lun 16, sorted, simple tags.
[ 9.336832] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAJB-0 00.0
PQ: 0 ANSI: 5
[ 9.338707] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP4002H QU10
PQ: 0 ANSI: 5
[ 9.341859] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.02
PQ: 0 ANSI: 5
[ 9.759117] usbcore: registered new interface driver uas
[ 9.926451] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298
GiB)
[ 9.927568] sd 1:0:0:0: [sdb] Write Protect is off
[ 9.927682] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 9.928187] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 9.928843] sd 0:0:6:0: [sda] 8466688 512-byte logical blocks: (4.33 GB/4.03
GiB)
[ 9.961873] sd 0:0:6:0: [sda] Write Protect is off
[ 9.962008] sd 0:0:6:0: [sda] Mode Sense: b3 00 00 08
[ 9.969008] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
[ 9.970897] sd 1:0:1:0: [sdc] 66055248 512-byte logical blocks: (33.8
GB/31.4 GiB)
[ 9.971902] sd 1:0:1:0: [sdc] Write Protect is off
[ 9.972014] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 9.972403] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 9.982416] sd 0:0:6:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 10.002727] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 10.035138] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 > sdc3
[ 10.035984] sdc: p3 size 13333950 extends beyond EOD, enabling native
capacity
[ 10.036386] ata1: soft resetting link
[ 10.052556] sda: sda1 sda2 < sda5 >
[ 10.104466] sd 0:0:6:0: [sda] Attached SCSI disk
[ 10.183515] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 10.183670] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 10.187931] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 10.205982] ata1.01: n_sectors mismatch 66055248 != 78242976
[ 10.206105] ata1.01: new n_sectors matches native, probably late HPA unlock,
n_sectors updated
[ 10.259526] Initializing USB Mass Storage driver...
[ 10.268811] scsi3 : usb-storage 1-1:1.0
[ 10.275291] scsi4 : usb-storage 1-2:1.0
[ 10.281263] usbcore: registered new interface driver usb-storage
[ 10.281376] USB Mass Storage support registered.
[ 10.290162] ata1.00: configured for UDMA/33
[ 10.297161] ata1.01: configured for UDMA/33
[ 10.297288] ata1: EH complete
[ 10.300577] sd 1:0:1:0: [sdc] 78242976 512-byte logical blocks: (40.0
GB/37.3 GiB)
[ 10.301932] sdc: detected capacity change from 33820286976 to 40060403712
[ 10.359864] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 > sdc3
[ 10.371444] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 10.725066] sd 0:0:6:0: Attached scsi generic sg0 type 0
[ 10.726599] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 10.732030] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 10.732604] sr 2:0:0:0: Attached scsi generic sg3 type 5
[ 11.278478] scsi 3:0:0:0: Direct-Access Generic USB SD Reader 1.00
PQ: 0 ANSI: 0
[ 11.282092] scsi 3:0:0:1: Direct-Access Generic USB CF Reader 1.01
PQ: 0 ANSI: 0
[ 11.285480] scsi 3:0:0:2: Direct-Access Generic USB SM Reader 1.02
PQ: 0 ANSI: 0
[ 11.287242] scsi 4:0:0:0: Direct-Access Flash Drive AU_USB2.0 8.07
PQ: 0 ANSI: 2
[ 11.288669] scsi 3:0:0:3: Direct-Access Generic USB MS Reader 1.03
PQ: 0 ANSI: 0
[ 11.302075] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 11.309143] sd 3:0:0:1: Attached scsi generic sg5 type 0
[ 11.313150] sd 3:0:0:2: Attached scsi generic sg6 type 0
[ 11.317785] sd 3:0:0:3: Attached scsi generic sg7 type 0
[ 11.319814] sd 4:0:0:0: Attached scsi generic sg8 type 0
[ 11.331387] sd 4:0:0:0: [sdh] 15888384 512-byte logical blocks: (8.13
GB/7.57 GiB)
[ 11.334382] sd 4:0:0:0: [sdh] Write Protect is off
[ 11.334511] sd 4:0:0:0: [sdh] Mode Sense: 03 00 00 00
[ 11.334539] sd 4:0:0:0: [sdh] Assuming drive cache: write through
[ 11.348392] sd 4:0:0:0: [sdh] Assuming drive cache: write through
[ 11.496516] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 11.513353] sd 3:0:0:1: [sde] Attached SCSI removable disk
[ 11.534374] sd 3:0:0:2: [sdf] Attached SCSI removable disk
[ 11.553383] sd 3:0:0:3: [sdg] Attached SCSI removable disk
[ 13.170969] sdh: sdh1
[ 13.182343] sd 4:0:0:0: [sdh] Assuming drive cache: write through
[ 13.182511] sd 4:0:0:0: [sdh] Attached SCSI removable disk
[ 15.884413] md: raid1 personality registered for level 1
[ 16.428557] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 16.428613] PM: Basic memory bitmaps created
[ 16.483113] PM: Basic memory bitmaps freed
[ 16.817092] EXT3-fs: barriers not enabled
[ 16.834893] kjournald starting. Commit interval 5 seconds
[ 16.836106] EXT3-fs (sdb7): mounted filesystem with ordered data mode
[ 19.460489] udevd[284]: starting version 168
[ 21.457473] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.652609] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 22.048692] gameport gameport0: EMU10K1 is pci0000:00:09.1/gameport0, io
0xdc00, speed 1217kHz
[ 22.768035] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.696305] ata1.00: configured for UDMA/33
[ 23.703291] ata1.01: configured for UDMA/33
[ 23.703438] ata1: EH complete
[ 23.844029] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input2
[ 23.880046] ata1.00: configured for UDMA/33
[ 23.887812] ata1.01: configured for UDMA/33
[ 23.887981] ata1: EH complete
[ 24.315375] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x5000,
revision 0
[ 28.476854] [drm] Initialized drm 1.1.0 20060810
[ 29.974427] Adding 2200868k swap on /dev/sdb5. Priority:-1 extents:1
across:2200868k
[ 31.221451] [drm] radeon kernel modesetting enabled.
[ 31.237124] [drm] initializing kernel modesetting (RV280 0x1002:0x5964).
[ 31.237363] [drm] register mmio base: 0xED000000
[ 31.237456] [drm] register mmio size: 65536
[ 31.244422] agpgart-intel 0000:00:00.0: AGP 1.0 bridge
[ 31.247808] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
[ 31.248036] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
[ 31.248174] radeon 0000:01:00.0: GTT: 64M 0xE8000000 - 0xEBFFFFFF
[ 31.248280] [drm] Generation 2 PCI interface, using max accessible memory
[ 31.248401] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 -
0x00000000DFFFFFFF (128M used)
[ 31.248589] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 31.248692] [drm] Driver supports precise vblank timestamp query.
[ 31.248853] [drm] radeon: irq initialized.
[ 31.250147] [drm] Detected VRAM RAM=128M, BAR=128M
[ 31.250275] [drm] RAM width 64bits DDR
[ 31.254286] [TTM] Zone kernel: Available graphics memory: 192398 kiB.
[ 31.254395] [TTM] Initializing pool allocator.
[ 31.254702] [drm] radeon: 128M of VRAM memory ready
[ 31.254807] [drm] radeon: 64M of GTT memory ready.
[ 31.269359] radeon 0000:01:00.0: WB disabled
[ 31.281680] [drm] Loading R200 Microcode
[ 31.453947] [drm] radeon: ring at 0x00000000E8001000
[ 31.459846] [drm] ring test succeeded in 0 usecs
[ 31.461492] [drm] radeon: ib pool ready.
[ 31.462139] [drm] ib test succeeded in 0 usecs
[ 31.503605] [drm] Radeon Display Connectors
[ 31.503841] [drm] Connector 0:
[ 31.503929] [drm] VGA
[ 31.504018] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 31.504112] [drm] Encoders:
[ 31.504194] [drm] CRT1: INTERNAL_DAC1
[ 31.504281] [drm] Connector 1:
[ 31.504360] [drm] DVI-I
[ 31.504437] [drm] HPD1
[ 31.504523] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 31.504613] [drm] Encoders:
[ 31.504693] [drm] CRT2: INTERNAL_DAC2
[ 31.504778] [drm] DFP1: INTERNAL_TMDS1
[ 31.504864] [drm] Connector 2:
[ 31.504944] [drm] S-video
[ 31.505020] [drm] Encoders:
[ 31.505103] [drm] TV1: INTERNAL_DAC2
[ 31.853733] PCI: setting IRQ 5 as level-triggered
[ 31.853778] EMU10K1_Audigy 0000:00:09.0: found PCI INT A -> IRQ 5
[ 31.865840] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[ 31.938589] [drm] fb mappable at 0xD8040000
[ 31.938716] [drm] vram apper at 0xD8000000
[ 31.938809] [drm] size 8294400
[ 31.938893] [drm] fb depth is 24
[ 31.938976] [drm] pitch is 7680
[ 31.942991] fbcon: radeondrmfb (fb0) is primary device
[ 32.174463] Console: switching to colour frame buffer device 240x67
[ 32.297194] fb0: radeondrmfb frame buffer device
[ 32.297212] drm: registered panic notifier
[ 32.311093] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on
minor 0
[ 35.730979] EXT3-fs (sdb7): using internal journal
[ 98.693709] EXT3-fs: barriers not enabled
[ 98.696946] kjournald starting. Commit interval 5 seconds
[ 98.698319] EXT3-fs (sdb1): using internal journal
[ 98.698813] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 98.910754] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 100.838040] IPv4 FIB: Using LC-trie version 0.409
[ 102.937062] 8139too 0000:00:0a.0: eth0: link up, 100Mbps, full-duplex, lpa
0x45E1
[ 113.405908] fuse init (API version 7.16)
[ 116.997268] microcode: CPU0 sig=0x633, pf=0x0, revision=0x34
[ 117.138668] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 119.532475] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet
Project Team
[ 119.564598] DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
[ 119.591747] NET: Registered protocol family 12
[ 119.916373] Clocksource tsc unstable (delta = 64081082 ns)
[ 119.948458] Switching to clocksource jiffies
[ 134.890760] lp: driver loaded but no devices found
[ 135.019063] ppdev: user-space parallel port driver
[ 135.431071] parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
[ 135.431136] parport0: irq 0 detected
[ 135.527874] lp0: using parport0 (polling).
[ 145.721813] tun: Universal TUN/TAP device driver, 1.6
[ 145.721861] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 191.594633] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 194.781624] start_kdeinit (2701): /proc/2701/oom_adj is deprecated, please
use /proc/2701/oom_score_adj instead.
[ 203.061851] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 235.707172] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
