Package: linux-2.6 Version: 3.0.0-1 Severity: normal EXACT STEPS LEADING TO PROBLEM (done as root): 1. echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor 2. cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
EXPECTED OUTCOME: ondemand ACTUAL OUTCOME: performance Gnome cpufreq applet shows "Performance". This also cannot be changed to "Ondemand", another frequency cannot be selected neither. REPRODUCIBILITY: always EXTRA SOFTWARE INSTALLED: cpufrequtils 007-2 gnome-applets 2.30.0-4 (for cpufreq-applet) OTHER COMMENTS: cpufreq-applet shows the frequencies: 1.6GHz, 1.4GHz, 1.2GHz, 999MHz, 799MHz, 599MHz, 399MHz, 199MHz but 1.6GHz, 1.33GHz and 799MHz are expected only (like in <= 2.39.x) I tried the same with a Lenovo t420i with linux-image-3.0.0-1-amd64 and it works as expected (so cpufreq works). On the EEE-PC it worked fine with 2.6.39-2-i686-pae. -- Package-specific info: ** Version: Linux version 3.0.0-1-686-pae (Debian 3.0.0-1) (b...@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-3) ) #1 SMP Sun Jul 24 14:27:32 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-3.0.0-1-686-pae root=/dev/mapper/bigend-root ro quiet printk.time=0 splash video=i915:modeset=1 ** Tainted: CO (5120) * Module from drivers/staging has been loaded. * Out-of-tree module has been loaded. ** Kernel log: speakup: module is from the staging directory, the quality is unknown, you have been warned. input: Speakup as /devices/virtual/input/input12 initialized device: /dev/synth, node (MAJOR 10, MINOR 25) speakup 3.1.6: initialized synth name on entry is: (null) speakup_soft: module is from the staging directory, the quality is unknown, you have been warned. synth probe initialized device: /dev/softsynth, node (MAJOR 10, MINOR 26) Adding 3903484k swap on /dev/mapper/bigend-swap. Priority:-1 extents:1 across:3903484k EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with ordered data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-5): using internal journal EXT3-fs (dm-5): mounted filesystem with ordered data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-3): using internal journal EXT3-fs (dm-3): mounted filesystem with ordered data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (dm-4): using internal journal EXT3-fs (dm-4): mounted filesystem with ordered data mode RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. FS-Cache: Loaded FS-Cache: Netfs 'nfs' registered for caching Installing knfsd (copyright (C) 1996 o...@monad.swb.de). fuse init (API version 7.16) pciehp: Unknown parameter `pciehp_slot_with_bus' NET: Registered protocol family 15 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) padlock_sha: VIA PadLock Hash Engine not detected. NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team DECnet: Routing cache hash table of 1024 buckets, 8Kbytes NET: Registered protocol family 12 ATL1E 0000:03:00.0: irq 44 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 ADDRCONF(NETDEV_UP): wlan0: link is not ready apm: BIOS not found. Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 composite sync not supported composite sync not supported lp: driver loaded but no devices found ppdev: user-space parallel port driver p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible. ondemand governor failed, too long transition latency of HW, fallback to performance governor p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available cpufreq-nforce2: No nForce2 chipset. powernow: This module only works with AMD K7 CPUs ondemand governor failed, too long transition latency of HW, fallback to performance governor ondemand governor failed, too long transition latency of HW, fallback to performance governor Ebtables v2.0 registered ip_tables: (C) 2000-2006 Netfilter Core Team ip6_tables: (C) 2000-2006 Netfilter Core Team Disabling lock debugging due to kernel taint vboxdrv: Found 2 processor cores. vboxdrv: fAsync=0 offMin=0x1e0 offMax=0x1950 vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000). composite sync not supported composite sync not supported composite sync not supported composite sync not supported type=1305 audit(1312988451.196:57311): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1 type=1305 audit(1312988451.196:57312): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 hda-intel: Invalid position buffer, using LPIB read method instead. hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. wlan0: authenticate with 00:14:bf:c4:c1:fd (try 1) wlan0: authenticated wlan0: associate with 00:14:bf:c4:c1:fd (try 1) wlan0: RX AssocResp from 00:14:bf:c4:c1:fd (capab=0x411 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present exe (3420): /proc/3420/oom_adj is deprecated, please use /proc/3420/oom_score_adj instead. keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 Monitor-Mwait will be used to enter C-3 state ondemand governor failed, too long transition latency of HW, fallback to performance governor keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 composite sync not supported composite sync not supported composite sync not supported ondemand governor failed, too long transition latency of HW, fallback to performance governor ondemand governor failed, too long transition latency of HW, fallback to performance governor ondemand governor failed, too long transition latency of HW, fallback to performance governor ** Model information not available ** Loaded modules: Module Size Used by vboxnetadp 13182 0 vboxnetflt 23919 0 vboxdrv 154720 2 vboxnetadp,vboxnetflt ip6table_filter 12492 0 ip6_tables 17255 1 ip6table_filter iptable_filter 12488 0 ip_tables 17149 1 iptable_filter ebtable_nat 12516 0 ebtables 17066 1 ebtable_nat x_tables 18076 5 ip6table_filter,ip6_tables,iptable_filter,ip_tables,ebtables cpufreq_userspace 12520 0 cpufreq_powersave 12422 0 cpufreq_conservative 12987 0 cpufreq_stats 12758 0 mperf 12421 0 p4_clockmod 12572 1 speedstep_lib 12570 1 p4_clockmod parport_pc 22059 0 ppdev 12651 0 lp 12894 0 parport 27241 3 parport_pc,ppdev,lp bnep 17301 2 rfcomm 28700 9 binfmt_misc 12880 1 decnet 51703 0 [permanent] uinput 12953 1 deflate 12495 0 zlib_deflate 21266 1 deflate ctr 12851 0 twofish_generic 16529 0 twofish_i586 12453 0 twofish_common 20528 2 twofish_generic,twofish_i586 camellia 28988 0 serpent 24847 0 blowfish 16576 0 cast5 24773 0 des_generic 20771 0 xcbc 12629 0 rmd160 16584 0 sha512_generic 16675 0 sha1_generic 12511 0 hmac 12787 0 crypto_null 12636 0 af_key 31284 0 fuse 56331 1 nfsd 197933 2 nfs 218404 0 lockd 61314 2 nfsd,nfs fscache 31952 1 nfs auth_rpcgss 32183 2 nfsd,nfs nfs_acl 12463 2 nfsd,nfs sunrpc 139050 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl speakup_soft 12646 0 speakup 66867 1 speakup_soft loop 17866 0 arc4 12418 2 btusb 17246 2 bluetooth 94736 23 bnep,rfcomm,btusb crc16 12327 1 bluetooth snd_hda_codec_realtek 206339 1 snd_hda_intel 21691 2 snd_hda_codec 58364 2 snd_hda_codec_realtek,snd_hda_intel joydev 17006 0 uvcvideo 56927 0 snd_hwdep 12936 1 snd_hda_codec snd_pcm_oss 36377 0 videodev 61530 1 uvcvideo snd_mixer_oss 17713 1 snd_pcm_oss media 13692 2 uvcvideo,videodev snd_pcm 53315 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 12744 0 snd_rawmidi 22621 1 snd_seq_midi snd_seq_midi_event 13124 1 snd_seq_midi snd_seq 39539 2 snd_seq_midi,snd_seq_midi_event snd_timer 22027 2 snd_pcm,snd_seq snd_seq_device 12985 3 snd_seq_midi,snd_rawmidi,snd_seq rt2800pci 13628 0 rt2800lib 39006 1 rt2800pci crc_ccitt 12331 1 rt2800lib rt2x00pci 12766 1 rt2800pci snd 38562 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device rt2x00lib 28943 3 rt2800pci,rt2800lib,rt2x00pci uhci_hcd 22275 0 mac80211 165768 3 rt2800lib,rt2x00pci,rt2x00lib ehci_hcd 35401 0 soundcore 12992 1 snd snd_page_alloc 12899 2 snd_hda_intel,snd_pcm psmouse 46216 0 rng_core 12616 0 cfg80211 112970 2 rt2x00lib,mac80211 usbcore 104234 5 btusb,uvcvideo,uhci_hcd,ehci_hcd atl1e 27316 0 eeepc_laptop 18249 0 eeprom_93cx6 12423 1 rt2800pci serio_raw 12734 0 sparse_keymap 12707 1 eeepc_laptop ac 12552 0 battery 12957 0 evdev 12995 30 rfkill 18522 5 bluetooth,cfg80211,eeepc_laptop power_supply 13283 2 ac,battery pci_hotplug 26736 1 eeepc_laptop processor 27382 2 ext3 99597 5 jbd 42027 1 ext3 mbcache 12898 1 ext3 sha256_generic 16709 2 aes_i586 16608 6 aes_generic 37066 1 aes_i586 cbc 12667 2 dm_crypt 18029 1 dm_mirror 17348 0 dm_region_hash 13274 1 dm_mirror dm_log 13350 2 dm_mirror,dm_region_hash dm_mod 56894 21 dm_crypt,dm_mirror,dm_log sd_mod 35493 3 crc_t10dif 12332 1 sd_mod ata_generic 12439 0 i915 294451 2 ata_piix 21110 2 libata 133339 2 ata_generic,ata_piix drm_kms_helper 22688 1 i915 drm 129806 3 i915,drm_kms_helper scsi_mod 135178 2 sd_mod,libata i2c_algo_bit 12722 1 i915 thermal 13138 0 i2c_core 19141 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit button 12810 1 i915 video 17475 1 i915 thermal_sys 17677 3 processor,thermal,video ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8340] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8340] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at dc00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8340] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:831a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 7fa00000-7fbfffff Prefetchable memory behind bridge: 000000007fc00000-000000007fdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 000000007f800000-000000007f9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 Network controller [0280]: Ralink corp. RT2860 [1814:0781] Subsystem: Ralink corp. Device [1814:2790] Physical Slot: eeepc-wifi Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2800pci 03:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0) Subsystem: ASUSTeK Computer Inc. Device [1043:8324] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at ec00 [size=128] Capabilities: <access denied> Kernel driver in use: ATL1E ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129 Bus 005 Device 002: ID 0b05:b700 ASUSTek Computer, Inc. Broadcom Bluetooth 2.1 -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.0.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.3 Linux image base package ii module-init-tools 3.16-1 tools for managing Linux kernel mo Versions of packages linux-image-3.0.0-1-686-pae recommends: ii firmware-linux-free 3 Binary firmware for various driver ii libc6-i686 2.13-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-3.0.0-1-686-pae suggests: ii grub-pc 1.99-9 GRand Unified Bootloader, version pn linux-doc-3.0.0 <none> (no description available) Versions of packages linux-image-3.0.0-1-686-pae is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.33 Binary firmware for various driver ii firmware-linux-nonfree 0.33 Binary firmware for various driver pn firmware-qlogic <none> (no description available) ii firmware-ralink 0.33 Binary firmware for Ralink wireles pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org