On Sep 1, 2014, at 9:17 AM, Németh Bálint <pannonm...@gmail.com> wrote:
> Hi > > try boot P1 or P0 ;) it only works after sea command. > Same result. :( The interesting thing is that I get the same error on the J6750 as well - which points to either a burn issue on the CD-RW, or possibly an issue with the ISO image itself (less likely though, per the successful boot from SCSI disk shown by Helge). > On Sep 1, 2014 4:05 PM, "Jawahar Panchal" <jpanc...@global-macro.org> wrote: > Following-up on the thread - here is the serial console output when I try and > boot from CD (this is the full install cd, not the netinst): > > > 1) Initial SEARCH for boot devices > > Main Menu: Enter command or menu > SEARCH > > Searching for potential boot device(s) > This may take several minutes. > > To discontinue search, press any key (termination may not be immediate). > > > POTENTIAL BOOT DEVICES > > Path# Device Path Device Type > ----- ----------------- ------------------------- > P0 scsiA.6 HP 73.4GST373454LW > P1 ide.0 HL-DT-STDVDRRW GWA-4161B > > > 2) And this is from booting without interacting with the IPL with “boot ide.0" > > Main Menu: Enter command or menu > boot ide.0 > Interact with IPL (Y, N, or Cancel)?> N > > > Booting... > Boot IO Dependent Code (IODC) revision 1 > > IPL error: bad LIF magic. > .... FAILED. > > > 3) If I interact with the IPL, no difference > > Main Menu: Enter command or menu > boot ide.0 > Interact with IPL (Y, N, or Cancel)?> Y > > Booting... > Boot IO Dependent Code (IODC) revision 1 > > IPL error: bad LIF magic. > .... FAILED. > > > There is no timeout in either case - the error is immediate - so not sure if > that points more to a bad image from the CD-RW. Also, I see that I have a > more recent version of IODC - not sure if this a red herring though. > > I don’t have a spare second SCSI drive to copy the image over to - will see > if I can scrounge up something (although at that point TFTP might be less > hassle…) - I only have one drive which will be the install target. =P > > Cheers, > Jay > > > -- > To UNSUBSCRIBE, email to debian-hppa-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > Archive: > https://lists.debian.org/17b1af5e-6687-4fe0-9980-c17b11b60...@global-macro.org >
