Ora funziona, ho inserito delle cosette nel kernel (scsi) riesco a montarlo e a vedere le cose che ci soo dentro, pero' nn riesco a copiarci le cose. Se copio un file, tutto ok pero' quando la smonto, la scollego e pi la ricollego e la monto nn rimane il file che precedentemente avevo copiato. Non credo che sia problema dei diritti della directory. Monto il dispositivo così nel fstab /dev/sda1 /mnt/memory auto noauto,user 0 0
vi invio anche una parte di dmesg dopo che ho inserito la memory uhci.c: root-hub INT complete: port1: 80 port2: 93 data: 4 hub.c: port 1, portstatus 100, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 1, 12 Mb/s hub.c: port 2 connection change hub.c: port 2, portstatus 101, change 1, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 103, change 0, 12 Mb/s hub.c: USB new device connect on bus1/2, assigned device number 2 usb.c: kmalloc IF c7f56840, numif 1 usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3 usb.c: USB device number 2 default language ID 0x409 Manufacturer: SigmaTel, Inc. Product: USBMSC Audio Player SerialNumber: 012345678901 usb.c: unhandled interfaces on device usb.c: USB device 2 (vend/prod 0x66f/0x8000) is not claimed by any active driver. Length = 18 DescriptorType = 01 USB version = 1.10 Vendor:Product = 066f:8000 MaxPacketSize0 = 64 NumConfigurations = 1 Device version = 0.01 Device Class:SubClass:Protocol = 00:00:00 Per-interface classes Configuration: bLength = 9 bDescriptorType = 02 wTotalLength = 0020 bNumInterfaces = 01 bConfigurationValue = 01 iConfiguration = 00 bmAttributes = c0 MaxPower = 100mA Interface: 0 Alternate Setting: 0 bLength = 9 bDescriptorType = 04 bInterfaceNumber = 00 bAlternateSetting = 00 bNumEndpoints = 02 bInterface Class:SubClass:Protocol = 08:06:50 iInterface = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 04 (out) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 81 (in) bmAttributes = 02 (Bulk) wMaxPacketSize = 0040 bInterval = 00 usb.c: kusbd: /sbin/hotplug add 2 usb.c: kusbd policy returned 0xfffffffe Adding Swap: 88352k swap-space (priority -1) SCSI subsystem driver Revision: 1.00 Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage scsi0 : SCSI emulation for USB Mass Storage devices Vendor: SigmaTel Model: MSCN Rev: 0001 Type: Direct-Access ANSI SCSI revision: 02 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 usb.c: usb-storage driver claimed interface c7f56840 USB Mass Storage support registered. Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 251904 512-byte hdwr sectors (129 MB) sda: Write Protect is off sda: sda1 >Alle 20:08, mercoledì 30 luglio 2003, [EMAIL PROTECTED] ha scritto: >> Non funziona, pero' il supporto per usb c'è visto che uso una tastiera >usb >> e con usbview vedo le caratteristiche della memory stick (che è anche un >> lettore mp3). >> AIUTATEMI, sarà mica la storia del lettore che pone problema? Mi sembra >> strano perchè sotto winzoz funziona correttamente, sia come lettore mp3 >> che memory stick. >> >[CUT] > >cosa dice >$ dmesg >??? > >MaXeR > > >-- >To UNSUBSCRIBE, email to [EMAIL PROTECTED] >with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >