Package: linux-image-2.6.21-2-686 Version: 2.6.21-6 Severity: critical Justification: breaks the whole system
*** Please type your report below this line *** After upgrading from linux-image-2.6.18-4-686 to linux-image-2.6.21-2-686, the system fails to boot because the kernel now suddenly sees hard drive as /dev/sda while linux-image-2.6.18-4-686 saw the same hard drive as /dev/hda. After editing /boot/grub/menu.lst and changing /dev/hda5 to /dev/sda5, ( title Debian GNU/Linux, kernel 2.6.22-1-686 root (hd0,4) kernel /boot/vmlinuz-2.6.22-1-686 root=/dev/sda5 ro vga=791 video=vesa:ywrap,mtrr initrd /boot/initrd.img-2.6.22-1-686 savedefault ) the system boots O.K with linux-image-2.6.21-2-686, but fails to enable dma for /dev/sda. So I installed linux-source-2.6.22 and compiled a new kernel with my own custom configuration, which saw the hard drive again as /dev/hda and enabled dma without problems. Still, I'd much prefer to use Debian's linux-image packages instead of custom compiled kernels. I also tried linux-image-2.6.22-1-686, which acts just like linux-image-2.6.21-2-686. Vesa lspci: 00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0649 (rev 10) 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter 00:05.0 IDE interface: Silicon Integrated Systems [SiS] 182 SATA/RAID Controller (rev 01) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 03:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200 SE TurboCache (TM)] (rev a1) dmesg for linux-image-2.6.21-2-686 after editing /boot/grub/menu.lst (as described above): Linux version 2.6.21-2-686 (Debian 2.6.21-6) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) # BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000003fe10000 end: 000000003ff10000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000003ff10000 size: 0000000000010000 end: 000000003ff20000 type: 3 copy_e820_map() start: 000000003ff20000 size: 00000000000e0000 end: 0000000040000000 type: 4 copy_e820_map() start: 00000000ff7c0000 size: 0000000000840000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff10000 (usable) BIOS-e820: 000000003ff10000 - 000000003ff20000 (ACPI data) BIOS-e820: 000000003ff20000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 261904) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 261904 early_node_map[1] active PFN ranges 0: 0 -> 261904 On node 0 totalpages: 261904 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 254 pages used for memmap HighMem zone: 32274 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP 000FB510, 0024 (r2 ACPIAM) ACPI: XSDT 3FF10100, 003C (r1 A M I OEMXSDT 7000511 MSFT 97) ACPI: FACP 3FF10290, 00F4 (r3 A M I OEMFACP 7000511 MSFT 97) ACPI: DSDT 3FF10430, 4054 (r1 A0231 A0231000 0 INTL 2002026) ACPI: FACS 3FF20000, 0040 ACPI: APIC 3FF10390, 005C (r1 A M I OEMAPIC 7000511 MSFT 97) ACPI: MCFG 3FF103F0, 003C (r1 A M I OEMMCFG 7000511 MSFT 97) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000) Built 1 zonelists. Total pages: 259858 Kernel command line: root=/dev/sda5 ro vga=791 video=vesa:ywrap,mtrr mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2931.846 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1029600k/1047616k available (1661k kernel code, 17244k reserved, 636k data, 212k init, 130112k highmem) virtual kernel memory layout: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0345000 - 0xc037a000 ( 212 kB) .data : 0xc029f5e5 - 0xc033e834 ( 636 kB) .text : 0xc0100000 - 0xc029f5e5 (1661 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5867.63 BogoMIPS (lpj=11735276) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebfbff 20000000 00000000 00003180 0000651d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 CPU0: Intel(R) Celeron(R) CPU 2.93GHz stepping 01 Total of 1 processors activated (5867.63 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:03:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 pnp: 00:0a: ioport range 0x480-0x487 has been reserved pnp: 00:0a: ioport range 0xd00-0xd7f has been reserved pnp: 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved pnp: 00:0b: iomem range 0xffe80000-0xffefffff could not be reserved pnp: 00:0b: iomem range 0xffb80000-0xffbfffff could not be reserved pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:0c: iomem range 0xfff80000-0xffffffff could not be reserved pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: faa00000-feafffff PREFETCH window: bfe00000-dfefffff PCI: Bridge: 0000:00:06.0 IO window: b000-bfff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: a000-afff MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 5332k freed audit: initializing netlink socket (disabled) audit(1187920232.744:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:d2d0 vesafb: pmi: set display start = c00cd306, set palette = c00cd370 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 212k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] SCSI subsystem initialized libata version 2.20 loaded. pata_sis 0000:00:02.5: version 0.5.0 ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 scsi0 : pata_sis usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ata1.00: ATA-6: ST3160021A, 8.01, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi1 : pata_sis ieee1394: Initialized config rom entry `ip1394' FDC 0 is a post-1991 82077 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM PHILIPS DVD8631 2X16 PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:03.0: irq 16, io mem 0xfebfb000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.1: irq 17, io mem 0xfebfc000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 18 ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.2: irq 18, io mem 0xfebfd000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-3: new full speed USB device using ohci_hcd and address 2 ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 PCI: cache line size of 128 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: irq 19, io mem 0xfebfe000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8] sata_sis 0000:00:05.0: version 0.7 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 21 sata_sis 0000:00:05.0: Detected SiS 182/965 chipset ata3: SATA max UDMA/133 cmd 0x0001e880 ctl 0x0001e802 bmdma 0x0001e080 irq 21 ata4: SATA max UDMA/133 cmd 0x0001e480 ctl 0x0001e402 bmdma 0x0001e088 irq 21 scsi2 : sata_sis usb 4-7: new high speed USB device using ehci_hcd and address 2 ata3: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x0001e887 scsi3 : sata_sis usb 4-7: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning ata4: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x0001e487 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4 sd 0:0:0:0: Attached scsi disk sda sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000054c6b0] kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. input: PC Speaker as /class/input/input1 Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 (c) Dave Jones pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) usb-storage: device scan complete scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 scsi 4:0:0:4: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 sd 4:0:0:0: Attached scsi removable disk sdb sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 4:0:0:1: Attached scsi removable disk sdc sd 4:0:0:1: Attached scsi generic sg3 type 0 sis190 Gigabit Ethernet driver 1.2 loaded. ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.0 to 64 sd 4:0:0:2: Attached scsi removable disk sdd sd 4:0:0:2: Attached scsi generic sg4 type 0 0000:00:04.0: Read MAC address from APC. sd 4:0:0:3: Attached scsi removable disk sde sd 4:0:0:3: Attached scsi generic sg5 type 0 sd 4:0:0:4: Attached scsi removable disk sdf sd 4:0:0:4: Attached scsi generic sg6 type 0 0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1. input: PS2++ Logitech Wheel Mouse as /class/input/input2 0000:00:04.0: Using transceiver at address 1 as default. 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8cfc400 (IRQ: 22), 00:13:d4:e5:01:d0 eth1: GMII mode. eth1: Enabling Auto-negotiation. ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 20 intel8x0_measure_ac97_clock: measured 52378 usecs intel8x0: clocking to 48000 EXT3 FS on sda5, internal journal loop: loaded (max 8 devices) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] fuse init (API version 7.8) ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8184 buckets, 65472 max) input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver PPP generic driver version 2.4.2 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: mii ext = 0000. eth1: mii lpa = 41e1 adv = 01e1. eth1: link on 100 Mbps Full Duplex mode. ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready PPP BSD Compression module registered eth1: no IPv6 routers present -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-2007.08.13 Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to fi_FI.UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.21-2-686 depends on: ii initramfs-tools [linux-initr 0.90 tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.21-2-686 recommends: ii libc6-i686 2.6.1-1 GNU C Library: Shared libraries [i -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.21-2-686/preinst/elilo-initrd-2.6.21-2-686: true linux-image-2.6.21-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.21-2-686/prerm/would-invalidate-boot-loader-2.6.21-2-686: true linux-image-2.6.21-2-686/preinst/already-running-this-2.6.21-2-686: linux-image-2.6.21-2-686/postinst/old-initrd-link-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/bootloader-error-2.6.21-2-686: linux-image-2.6.21-2-686/preinst/lilo-initrd-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/depmod-error-initrd-2.6.21-2-686: false linux-image-2.6.21-2-686/preinst/bootloader-initrd-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/bootloader-test-error-2.6.21-2-686: linux-image-2.6.21-2-686/postinst/old-dir-initrd-link-2.6.21-2-686: true linux-image-2.6.21-2-686/prerm/removing-running-kernel-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/kimage-is-a-directory: linux-image-2.6.21-2-686/preinst/failed-to-move-modules-2.6.21-2-686: linux-image-2.6.21-2-686/preinst/abort-overwrite-2.6.21-2-686: linux-image-2.6.21-2-686/preinst/initrd-2.6.21-2-686: linux-image-2.6.21-2-686/preinst/overwriting-modules-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/create-kimage-link-2.6.21-2-686: true linux-image-2.6.21-2-686/postinst/depmod-error-2.6.21-2-686: false linux-image-2.6.21-2-686/postinst/old-system-map-link-2.6.21-2-686: true linux-image-2.6.21-2-686/preinst/abort-install-2.6.21-2-686: ................................................................... Luukku Plus paketilla pääset eroon tila- ja turvallisuusongelmista. Hanki Luukku Plus ja helpotat elämääsi. http://www.mtv3.fi/luukku