Package: linux-image-2.6.24-1-686 Version: 2.6.24-2 Severity: normal With the upgrade to linux-image-2.6.24-1-686, sound no onger works on this machine. Strting KDE gives me the artsmessage "Error while initializing the sound driver: device /dev/dsp can't be opened (No such file or directory)" It does work properly with the previous kernels, including 2.6.22-3-686. lspci lists: '$ lspci |grep audio 00:0d.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator'
-- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-2) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu Jan 31 20:35:50 UTC 2008 ** Command line: root=/dev/hda2 ro vga=792 ** Not tainted ** Kernel log: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 10, io base 0x00001880 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:07.1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hda: IBM-DARA-218000, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... SCSI subsystem initialized libata version 3.00 loaded. hda: max request size: 128KiB hda: 35433216 sectors (18141 MB) w/418KiB Cache, CHS=35152/16/63 hda: cache flushes not supported hda: hda1 hda2 hda3 usbcore: registered new interface driver hiddev input: Kensington Kensington USB/PS2 Wheel Mouse as /class/input/input1 input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington USB/PS2 Wheel Mouse] on usb-0000:00:07.2-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input2 Real Time Clock Driver v1.12ac parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Linux agpgart interface v0.102 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Yenta: CardBus bridge found at 0000:00:0a.0 [103c:0010] Yenta: Enabling burst memory read transactions Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1272, devctl 0x66 Yenta: ISA IRQ mask 0x0838, PCI irq 10 Socket status: 30000006 Yenta: CardBus bridge found at 0000:00:0a.1 [103c:0010] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:0a.1, mfunc 0x012c1272, devctl 0x66 Yenta: ISA IRQ mask 0x0838, PCI irq 10 Socket status: 30000006 agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt for device 0000:00:0d.0 disabled Maestro3: probe of 0000:00:0d.0 failed with error -2 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLP] Synaptics Touchpad, model: 1, fw: 5.4, id: 0x9b54b1, caps: 0x844793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input6 cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) input: Video Bus as /class/input/input7 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) IBM TrackPoint firmware: 0x0b, buttons: 2/3 input: TPPS/2 IBM TrackPoint as /class/input/input8 Adding 960112k swap on /dev/hda3. Priority:-1 extents:1 across:960112k EXT3 FS on hda2, internal journal Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. [drm] Initialized drm 1.1.0 20060810 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] eth0: setting full-duplex. NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver eth0: no IPv6 routers present ** Loaded modules: Module Size Used by ppdev 8804 0 lp 11076 0 ipv6 240772 18 dm_snapshot 16964 0 dm_mirror 21600 0 dm_mod 55812 2 dm_snapshot,dm_mirror drm 74036 0 usb_storage 77440 0 ati_agp 8684 0 ide_cd 36224 0 cdrom 32512 1 ide_cd joydev 11360 0 video 18672 0 output 3744 1 video battery 8640 0 container 4864 0 ac 4544 0 pcmcia 37036 0 psmouse 36464 0 serio_raw 6660 0 button 8432 0 snd_maestro3 21188 0 firmware_class 9408 2 pcmcia,snd_maestro3 snd_ac97_codec 92932 1 snd_maestro3 i2c_piix4 8428 0 intel_agp 23412 1 ac97_bus 2176 1 snd_ac97_codec i2c_core 22432 1 i2c_piix4 yenta_socket 24844 2 rsrc_nonstatic 11872 1 yenta_socket pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic shpchp 31028 0 pci_hotplug 27712 1 shpchp agpgart 31688 3 drm,ati_agp,intel_agp parport_pc 33668 1 parport 34280 3 ppdev,lp,parport_pc evdev 11104 6 snd_pcm 71780 2 snd_maestro3,snd_ac97_codec snd_timer 21092 1 snd_pcm snd_page_alloc 10056 1 snd_pcm snd 48612 4 snd_maestro3,snd_ac97_codec,snd_pcm,snd_timer soundcore 7552 1 snd rtc 13052 0 pcspkr 3200 0 ext3 122920 1 jbd 43732 1 ext3 mbcache 8288 1 ext3 usbhid 28096 0 hid 34272 1 usbhid ide_disk 15648 3 ata_generic 7428 0 libata 144464 1 ata_generic scsi_mod 141196 2 usb_storage,libata piix 7492 0 [permanent] generic 4388 0 [permanent] uhci_hcd 23376 0 ide_core 108292 4 ide_cd,ide_disk,piix,generic 3c59x 41064 0 mii 5312 1 3c59x usbcore 132940 4 usb_storage,usbhid,uhci_hcd floppy 54628 0 thermal 16028 0 processor 36520 2 thermal fan 4772 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00009000-00009fff Memory behind bridge: f4100000-f5ffffff Prefetchable memory behind bridge: 30000000-300fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 18a0 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin ? routed to IRQ 9 Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:0a.0 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51] Subsystem: Hewlett-Packard Company Unknown device [103c:0010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at 30120000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 20000000-23fff000 (prefetchable) Memory window 1: 24000000-27fff000 I/O window 0: 00001c00-00001cff I/O window 1: 00002000-000020ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 00:0a.1 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51] Subsystem: Hewlett-Packard Company Unknown device [103c:0010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at 30121000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 28000000-2bfff000 (prefetchable) Memory window 1: 2c000000-2ffff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 00:0b.0 Ethernet controller [0200]: 3Com Corporation 3c556 Hurricane CardBus [Cyclone] [10b7:6055] (rev 10) Subsystem: 3Com Corporation Unknown device [10b7:6256] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 80 (2500ns min, 1250ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 1800 [size=128] Region 1: Memory at f4002400 (32-bit, non-prefetchable) [size=128] Region 2: Memory at f4002000 (32-bit, non-prefetchable) [size=128] [virtual] Expansion ROM at 30100000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x Kernel modules: 3c59x 00:0b.1 Communication controller [0780]: 3Com Corporation Mini PCI 56k Winmodem [10b7:1007] (rev 10) Subsystem: 3Com Corporation Unknown device [10b7:6158] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 1000 [size=256] Region 1: Memory at f4002c00 (32-bit, non-prefetchable) [size=256] Region 2: Memory at f4002800 (32-bit, non-prefetchable) [size=128] Capabilities: <access denied> 00:0d.0 Multimedia audio controller [0401]: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator [125d:1998] Subsystem: Hewlett-Packard Company Unknown device [103c:0010] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel modules: snd-maestro3 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility P/M AGP 2x [1002:4c4d] (rev 64) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Unknown device [103c:0010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at 9000 [size=256] Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 30000000 [disabled] [size=128K] Capabilities: <access denied> -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-686 depends on: ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-1-686 recommends: ii libc6-i686 2.7-6 GNU C Library: Shared libraries [i -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686: linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/kimage-is-a-directory: linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]