i'm using it right now, without any trouble. $lspci 00:0b.0 Host bridge: Apple Computer Inc.: Unknown device 002d 00:10.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4c66 (rev 01) 10:0b.0 Host bridge: Apple Computer Inc.: Unknown device 002e 10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03) 10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB 10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB 10:1a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) 24:0b.0 Host bridge: Apple Computer Inc.: Unknown device 002f 24:0e.0 Class ffff: Lucent Microelectronics: Unknown device 5811 (rev ff) 24:0f.0 Class ffff: Apple Computer Inc. UniNorth GMAC (rev ff)
$dmesg |grep airport airport.c 0.13d (Benjamin Herrenschmidt <[EMAIL PROTECTED]>) airport: card registered for interface eth1 On Thu, 3 Jul 2003, Jamie Wilkinson wrote: > This one time, at band camp, Jamie Wilkinson wrote: > >eth1: Unknown information frame received (type f202). > > I'm getting this message about 8 times a minute from all the APs I've tried > to connect to. > > Please, if anyone is using their builtin airport card using 2.4.21-ben2 > say so, so I have some datapoints to compare to. lspci and dmesg output > when the module is loaded would be useful too. > >