Доброго LOCAL_TIME, Рассылка!

Помогите, пожауйста, разобраться с плохим "просыпанием" ноутбука.

sudo lspci -vvk
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O
Controller (rev 03)
        Subsystem: IBM Device 0529
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: [e4] Vendor Specific Information <?>
        Capabilities: [a0] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 
64bit-
FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
        Kernel driver in use: agpgart-intel
        Kernel modules: intel-agp

00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP
Controller (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 96
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: c0100000-c01fffff
        Prefetchable memory behind bridge: e0000000-e7ffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
        Subsystem: IBM Device 052d
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 4: I/O ports at 1800 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
        Subsystem: IBM Device 052d
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 1820 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
        Subsystem: IBM Device 052d
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 11
        Region 4: I/O ports at 1840 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 01) (prog-if 20)
        Subsystem: IBM Device 052e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 11
        Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+
        Capabilities: [58] Debug port: BAR=1 offset=0080
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=64
        I/O behind bridge: 00004000-00007fff
        Memory behind bridge: c0200000-cfffffff
        Prefetchable memory behind bridge: e8000000-efffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge (rev 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: IBM Device 052d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 1860 [size=16]
        Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
        Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 01)
        Subsystem: IBM Device 052d
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 1880 [size=32]
        Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
        Subsystem: IBM Device 0523
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: I/O ports at 18c0 [size=64]
        Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
        Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: Intel ICH
        Kernel modules: snd-intel8x0

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 01)
        Subsystem: IBM Device 0524
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 11
        Region 0: I/O ports at 2400 [size=256]
        Region 1: I/O ports at 2000 [size=128]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: snd-intel8x0m

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility M7 LW [Radeon Mobility 7500]
        Subsystem: IBM Device 0527
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+ DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 66 (2000ns min), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 3000 [size=256]
        Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
        Capabilities: [58] AGP version 2.0
                Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 
64bit-
FW- AGP3- Rate=x1,x2,x4
                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- 
Rate=x4
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: radeonfb

02:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
        Subsystem: IBM Device 0528
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168, Cache Line Size: 128 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at c0206000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=04, sec-latency=176
        Memory window 0: e8000000-ebfff000 (prefetchable)
        Memory window 1: c4000000-c7fff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus
        Kernel modules: yenta_socket

02:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B
Mini PCI Adapter (rev 04)
        Subsystem: Intel Corporation Device 2551
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min, 8500ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at c0204000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Kernel driver in use: ipw2100
        Kernel modules: ipw2100

02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10)
        Subsystem: IBM Device 0515
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at c0205000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+
        Kernel driver in use: ohci1394
        Kernel modules: firewire-ohci, ohci1394

Ноутбук стал плохо выходить из Suspend-to-RAM: тачпад работает, но на
экране мусор (несовсем сформировавшееся изображение, видно то, что
должен "прикрыть" screensaver), но реакцию на клавиатуру нет.
Приходится выключать принудительно и заходить с Ubuntu LiveCD,
прогонять fsck партиции.

Вот последнее из syslog из повисшей системы:

Sep 26 21:22:51 thinkpad gnome-power-manager: (nbooker) Resuming computer
Sep 26 21:22:51 thinkpad kernel: [25665.148380] PM: Syncing
filesystems ... done.
Sep 26 21:22:51 thinkpad kernel: [25665.158643] Freezing user space
processes ... (elapsed 0.00 seconds) done.
Sep 26 21:22:51 thinkpad kernel: [25665.159879] Freezing remaining
freezable tasks ... (elapsed 0.00 seconds) done.
Sep 26 21:22:51 thinkpad kernel: [25665.159953] Suspending console(s)
Sep 26 21:22:51 thinkpad kernel: [25666.396280] parport_pc 00:0b: disabled
Sep 26 21:22:51 thinkpad kernel: [25666.396459] serial 00:0a: disabled
Sep 26 21:22:51 thinkpad kernel: [25666.396601] ACPI handle has no context!
Sep 26 21:22:51 thinkpad kernel: [25666.536162] ACPI: PCI interrupt
for device 0000:02:02.0 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.552350] ACPI: PCI interrupt
for device 0000:00:1f.6 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.568305] ACPI: PCI interrupt
for device 0000:00:1f.5 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.568467] ACPI: PCI interrupt
for device 0000:00:1d.7 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.587626] ACPI: PCI interrupt
for device 0000:00:1d.2 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.587655] ACPI: PCI interrupt
for device 0000:00:1d.1 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.587685] ACPI: PCI interrupt
for device 0000:00:1d.0 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.776093] ACPI: Preparing to
enter system sleep state S3
Sep 26 21:22:51 thinkpad kernel: [25667.676136] Disabling non-boot CPUs ...
Sep 26 21:22:51 thinkpad kernel: [25667.676226] Extended CMOS year: 2000
Sep 26 21:22:51 thinkpad kernel: [25667.676226] Intel machine check
architecture supported.
Sep 26 21:22:51 thinkpad kernel: [25667.676236] Intel machine check
reporting enabled on CPU#0.
Sep 26 21:22:51 thinkpad kernel: [25667.676275] Back to C!
Sep 26 21:22:51 thinkpad kernel: [25667.676491] Extended CMOS year: 2000
Sep 26 21:22:51 thinkpad kernel: [25668.984358] ACPI: EC: non-query
interrupt received, switching to interrupt mode
Sep 26 21:22:51 thinkpad kernel: [25669.048073] PM: Writing back
config space on device 0000:00:01.0 at offset 7 (was 2a03030, writing
22a03030)
Sep 26 21:22:51 thinkpad kernel: [25669.048092] ACPI: PCI Interrupt
0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.048101] PCI: Setting latency
timer of device 0000:00:1d.0 to 64
Sep 26 21:22:51 thinkpad kernel: [25669.048142] usb usb1: root hub
lost power or was reset
Sep 26 21:22:51 thinkpad kernel: [25669.048181] ACPI: PCI Interrupt
0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.048188] PCI: Setting latency
timer of device 0000:00:1d.1 to 64
Sep 26 21:22:51 thinkpad kernel: [25669.048227] usb usb2: root hub
lost power or was reset
Sep 26 21:22:51 thinkpad kernel: [25669.048257] ACPI: PCI Interrupt
0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.048264] PCI: Setting latency
timer of device 0000:00:1d.2 to 64
Sep 26 21:22:51 thinkpad kernel: [25669.048302] usb usb3: root hub
lost power or was reset
Sep 26 21:22:51 thinkpad kernel: [25669.065526] ACPI: PCI Interrupt
0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.065534] PCI: Setting latency
timer of device 0000:00:1d.7 to 64
Sep 26 21:22:51 thinkpad kernel: [25669.065626] PCI: Setting latency
timer of device 0000:00:1e.0 to 64
Sep 26 21:22:51 thinkpad kernel: [25669.065662] PM: Writing back
config space on device 0000:00:1f.1 at offset 9 (was 0, writing
50000000)
Sep 26 21:22:51 thinkpad kernel: [25669.065676] PM: Writing back
config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing
2800007)
Sep 26 21:22:51 thinkpad kernel: [25669.065687] ACPI: PCI Interrupt
0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.065737] PM: Writing back
config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing
2900003)
Sep 26 21:22:51 thinkpad kernel: [25669.065752] ACPI: PCI Interrupt
0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.065760] PCI: Setting latency
timer of device 0000:00:1f.5 to 64
Sep 26 21:22:51 thinkpad kernel: [25670.092143] PM: Writing back
config space on device 0000:00:1f.6 at offset 1 (was 2900005, writing
2900001)
Sep 26 21:22:51 thinkpad kernel: [25670.092158] ACPI: PCI Interrupt
0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25670.092166] PCI: Setting latency
timer of device 0000:00:1f.6 to 64
Sep 26 21:22:51 thinkpad kernel: [25671.096778] ACPI: PCI Interrupt
0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25671.252128] ACPI: PCI Interrupt
0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25671.601901] ohci1394: fw-host0:
OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[c0205000-c02057ff]  Max
Packet=[2048]  IR/IT contexts=[4/8]
Sep 26 21:22:51 thinkpad kernel: [25671.604426] serial 00:0a: activated
Sep 26 21:22:51 thinkpad kernel: [25671.604426] parport_pc 00:0b: activated
Sep 26 21:22:51 thinkpad kernel: [25672.772017] hda: host max PIO4
wanted PIO255(auto-tune) selected PIO4
Sep 26 21:22:51 thinkpad kernel: [25672.772214] hda: UDMA/100 mode selected
Sep 26 21:22:51 thinkpad kernel: [25672.776485] hdc: host max PIO4
wanted PIO255(auto-tune) selected PIO4
Sep 26 21:22:51 thinkpad kernel: [25672.788936] hdc: UDMA/33 mode selected
Sep 26 21:22:51 thinkpad kernel: [25675.388562] Restarting tasks ...
<3>hub 1-0:1.0: over-current change on port 1

В dmesg ничего нет, таймстамп очень маленький, что бы иметь отношение
к происходящему.
Вот последнее из messages:

Sep 26 18:06:45 thinkpad gnome-power-manager: (nbooker) Suspending
computer. Reason: User clicked on tray
Sep 26 21:22:51 thinkpad gnome-power-manager: (nbooker) Resuming computer
Sep 26 21:22:51 thinkpad kernel: [25665.148380] PM: Syncing
filesystems ... done.
Sep 26 21:22:51 thinkpad kernel: [25665.158643] Freezing user space
processes ... (elapsed 0.00 seconds) done.
Sep 26 21:22:51 thinkpad kernel: [25665.159879] Freezing remaining
freezable tasks ... (elapsed 0.00 seconds) done.
Sep 26 21:22:51 thinkpad kernel: [25665.159953] Suspending console(s)
Sep 26 21:22:51 thinkpad kernel: [25666.396280] parport_pc 00:0b: disabled
Sep 26 21:22:51 thinkpad kernel: [25666.396459] serial 00:0a: disabled
Sep 26 21:22:51 thinkpad kernel: [25666.536162] ACPI: PCI interrupt
for device 0000:02:02.0 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.552350] ACPI: PCI interrupt
for device 0000:00:1f.6 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.568305] ACPI: PCI interrupt
for device 0000:00:1f.5 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.568467] ACPI: PCI interrupt
for device 0000:00:1d.7 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.587626] ACPI: PCI interrupt
for device 0000:00:1d.2 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.587655] ACPI: PCI interrupt
for device 0000:00:1d.1 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.587685] ACPI: PCI interrupt
for device 0000:00:1d.0 disabled
Sep 26 21:22:51 thinkpad kernel: [25666.776093] ACPI: Preparing to
enter system sleep state S3
Sep 26 21:22:51 thinkpad kernel: [25667.676136] Disabling non-boot CPUs ...
Sep 26 21:22:51 thinkpad kernel: [25667.676226] Extended CMOS year: 2000
Sep 26 21:22:51 thinkpad kernel: [25667.676226] Intel machine check
architecture supported.
Sep 26 21:22:51 thinkpad kernel: [25667.676236] Intel machine check
reporting enabled on CPU#0.
Sep 26 21:22:51 thinkpad kernel: [25667.676491] Extended CMOS year: 2000
Sep 26 21:22:51 thinkpad kernel: [25668.984358] ACPI: EC: non-query
interrupt received, switching to interrupt mode
Sep 26 21:22:51 thinkpad kernel: [25669.048092] ACPI: PCI Interrupt
0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.048142] usb usb1: root hub
lost power or was reset
Sep 26 21:22:51 thinkpad kernel: [25669.048181] ACPI: PCI Interrupt
0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.048227] usb usb2: root hub
lost power or was reset
Sep 26 21:22:51 thinkpad kernel: [25669.048257] ACPI: PCI Interrupt
0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.048302] usb usb3: root hub
lost power or was reset
Sep 26 21:22:51 thinkpad kernel: [25669.065526] ACPI: PCI Interrupt
0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.065687] ACPI: PCI Interrupt
0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25669.065752] ACPI: PCI Interrupt
0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25670.092158] ACPI: PCI Interrupt
0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25671.096778] ACPI: PCI Interrupt
0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25671.252128] ACPI: PCI Interrupt
0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Sep 26 21:22:51 thinkpad kernel: [25671.601901] ohci1394: fw-host0:
OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[c0205000-c02057ff]  Max
Packet=[2048]  IR/IT contexts=[4/8]
Sep 26 21:22:51 thinkpad kernel: [25671.604426] serial 00:0a: activated
Sep 26 21:22:51 thinkpad kernel: [25671.604426] parport_pc 00:0b: activated
Sep 26 21:22:51 thinkpad kernel: [25672.772214] hda: UDMA/100 mode selected
Sep 26 21:22:51 thinkpad kernel: [25672.788936] hdc: UDMA/33 mode selected
Sep 26 21:22:51 thinkpad kernel: [25675.388562] Restarting tasks ...
<3>hub 1-0:1.0: over-current change on port 1

Помогите, пожалуйста, разобраться, что сломалось :(

-- 
С Уважением,
Марк Гольдштейн

Sincerely Yours'
Mark Goldshtein


--
To UNSUBSCRIBE, email to debian-russian-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Ответить