On Sat, Jun 23, 2007 at 09:33:13PM +0200, Josip Rodin wrote: > The relevant silo.conf bits are: > > append="video=atyfb:off console=ttyS0,9600n8"
After carefully re-reading Documentation/serial-console.txt I've tried this instead: console=ttyS0,9600 console=tty0 And that got me the kernel output, but still no input. Then I figured, maybe console=tty0 was the clincher, and so I removed both lines, but that didn't work out at all (or at least the kernel got stuck on something else, but I couldn't see *what*, from RSC). I reset and booted with console=ttyS0, and the machine booted properly. I've also previously unplugged the keyboard from the machine, hoping that this will help. It didn't seem to make a difference (other than the PROM simply reporting that there is no keyboard). The tty-relevant dmesg messages are: f0088588: ttyS0 at MMIO 0x7fe7e400000 (irq = 11) is a SAB82532 V3.2 Console: ttyS0 (SAB82532) f0088588: ttyS1 at MMIO 0x7fe7e400040 (irq = 11) is a SAB82532 V3.2 I'm out of ideas right now. -- 2. That which causes joy or happiness. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]