I've had intermittent problems with the xircom_cb kernel module. You might try using the xircom_tulip_cb driver; I've found better success with it.
A. On Thu, 2002-01-24 at 13:38, Bernd Kunze wrote: > Hi, > > just migrated from RH 7.1 to woody. I did install the 2.4.17 kernel plus > pcmcia-cs. However, when pcmcia is started it does not recognize and > load the driver for the xircom card. Even if I load the driver manually > and start /etc/pcmcia/network start xircom_cb the ifuser seems to hang > for 2 minutes and lock the card. After ifuser terminates, I hear a beep. > > If I use modconf to load the modules during kernel load, I am ok (with > the side effect I can not use netenv though). > > Am I totally off record or is this a known problem? > > Thx., > Bernd > -- > > Bernd Kunze [EMAIL PROTECTED] > Technical Program Manager > http://www.unispherenetworks.com > Unisphere Networks > > GSM : +49 172 297 4707 > Home Office : +49 202 6084789 > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
pgprFyEWCY5BR.pgp
Description: PGP signature
