Maybe a stupid question, but isn't cardmgr supposed to recognize the card by itself? How do I force it to xircom_tulip_cb?
Bernd On Thu, 2002-01-24 at 19:40, Art the Lemming wrote: > I've had intermittent problems with the xircom_cb kernel module. You > might try using the xircom_tulip_cb driver; I've found better success > with it. > > A. > > On Thu, 2002-01-24 at 13:38, Bernd Kunze wrote: > > Hi, > > > > just migrated from RH 7.1 to woody. I did install the 2.4.17 kernel plus > > pcmcia-cs. However, when pcmcia is started it does not recognize and > > load the driver for the xircom card. Even if I load the driver manually > > and start /etc/pcmcia/network start xircom_cb the ifuser seems to hang > > for 2 minutes and lock the card. After ifuser terminates, I hear a beep. > > > > If I use modconf to load the modules during kernel load, I am ok (with > > the side effect I can not use netenv though). > > > > Am I totally off record or is this a known problem? > > > > Thx., > > Bernd > > -- > > > > Bernd Kunze [EMAIL PROTECTED] > > Technical Program Manager > > http://www.unispherenetworks.com > > Unisphere Networks > > > > GSM : +49 172 297 4707 > > Home Office : +49 202 6084789 > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > -- Bernd Kunze [EMAIL PROTECTED] Technical Program Manager http://www.unispherenetworks.com Unisphere Networks GSM : +49 172 297 4707 Home Office : +49 202 6084789
