Bonjour à tous,
Voila je viens d'installer le module Zydas pur une carte usb reconnu comme:
#lsusb
Bus 001 Device 008: ID 0ace:1211 ZyDAS 802.11b/g USB2 WiFi
#lsmod
Module Size Used by
ndiswrapper 158140 0
ehci_hcd 25192 0
zd1211b 280704 0
zd1211 279776 0
nfsd 82344 13
exportfs 4960 1 nfsd
lockd 53672 2 nfsd
sunrpc 131620 8 nfsd,lockd
agpgart 29244 0
usbhid 25764 0
ide_cd 35296 0
cdrom 32016 1 ide_cd
ide_cs 9440 1
uhci_hcd 26640 0
pcmcia 34324 1 ide_cs
shpchp 37312 0
usbcore 109152 7
ndiswrapper,ehci_hcd,zd1211b,zd1211,usbhid,uhci_hcd
pci_hotplug 24308 1 shpchp
donc a mon avis les modules sont chargés correctement.
De plus dmesg me donne (ne tenez pas compte de eth0=>carte réseau fillaire);
#dmesg
usb 1-1.1: device descriptor read/64, error -110
usb 1-1.1: new full speed USB device using uhci_hcd and address 4
usb 1-1.1: device descriptor read/64, error -110
usb 1-1.1: device descriptor read/64, error -110
usb 1-1.1: new full speed USB device using uhci_hcd and address 5
usb 1-1.1: device not accepting address 5, error -110
usb 1-1.1: new full speed USB device using uhci_hcd and address 6
usb 1-1.1: device not accepting address 6, error -110
usb 1-1.2: new low speed USB device using uhci_hcd and address 7
usb 1-1.2: configuration #1 chosen from 1 choice
input: HID 062a:0001 as /class/input/input2
input: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:07.2-1.2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Linux agpgart interface v0.101 (c) Dave Jones
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
usb 1-1.1: new full speed USB device using uhci_hcd and address 8
usb 1-1.1: configuration #1 chosen from 1 choice
_____ ____ _ ____
|__ / _| _ \ / \ / ___|
/ / | | | | | |/ _ \ \___ \
/ /| |_| | |_| / ___ \ ___) |
/____\__, |____/_/ \_\____/
|___/
zd1211 - version 2.5.0.0
Release Ver = 4330
zd1211:bulk out: wMaxPacketSize = 40
zd1211:bulk in: wMaxPacketSize = 40
zd1211:interrupt in: wMaxPacketSize = 40
zd1211:interrupt in: int_interval = 1
zd1211:bulk out: wMaxPacketSize = 40
EEPORM Ver = 4330
zd1211:USB Download Boot code success
zd1211:MAC address = 00:0e:2e:50:78:fb
zd1211:AddrEntryTable = f7d4
zd1211:RF_Mode = 00000004
PA type: 0
AiroHa AL2230RF
zd1211:Pure B-Mode
zd1211:File opening did not success
zd1211:AllowedChannel = 000007ff
zd1211:LinkLEDn = 200
AllowedChannel = 000107ff
Region:48
zd1205: (exit) zd1205_config, /root/ZD1211LnxDrv_2_6_0_0/src/zd1205.c line 2493
zd1205: (exit) zd1205_init, /root/ZD1211LnxDrv_2_6_0_0/src/zd1205.c line 7977
usbcore: registered new driver zd1211
_____ ____ _ ____
|__ / _| _ \ / \ / ___|
/ / | | | | | |/ _ \ \___ \
/ /| |_| | |_| / ___ \ ___) |
/____\__, |____/_/ \_\____/
|___/
ZD1211B - version 2.5.0.0
usbcore: registered new driver zd1211b
ndiswrapper: device wlan0 removed
ndiswrapper version 1.13 loaded (preempt=no,smp=no)
ndiswrapper: driver wg511v2 () loaded
PCI: Setting latency timer of device 0000:02:00.0 to 64
ndiswrapper: using irq 11
wlan0: vendor: ''
wlan0: ndiswrapper ethernet device 00:14:6c:2d:2c:9d using driver wg511v2,
11AB:1FAA:1385:4E00.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA
eth0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
spurious 8259A interrupt: IRQ7.
Mon fichier de configuration reseau est (juste la parti pour la carte Zydas)
vim /etc/network/interfaces
# ZYDAS 1211 (connectland)
iface eth1 inet static
wireless-mode monitor
# wireless-channel auto
# wireless-essid
# wireless-key
# address
# netmask
# network
# gateway
# dns-server
Quand je fais:
ifconfig eth1 up il me donne;
eth1: ERROR while getting interface flags: Aucun périphérique de ce type
zsh: exit 255 ifconfig eth1 up
Aidez moi s'il vous plait!!?
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
