(Ganha um doce quem me conseguir me ajudar .. ) ;) Estou tendo um problema ao tentar usar o k3b, ou melhor, esse problema jah me acompanha a meses .. ;)
Consigo gravar cd usando diretamente o cdrecord, mas nao consigo gravar atraves do k3b que envia comandos atraves do cdrecord (duh..) :)) Meu hardware eh um Libretto U105 com uma dock que eh um gravador de cd.. A conexao entre a dock e o note, apesar de parecer algo que soh existe neste modelo, conecta o drive como usb.. Hotswap.. Inclusive quando manipulo ela pelo Windows (sim, uma vez lah que nunca booto ele no Windows pre-instalado), aparece como USB .. Versoes: Debian Unstable totalmente nao-atualizado :( k3b 0.12.15 Cdrecord-Clone 2.01.01a03 O k3b detecta um drive /dev/scd0 como sendo o dev=11,0,0 e especificando esse device no cdrecord diretamente, nao funciona ... O k3b estah enviando esta linha de comando para apagar um cd-rw: /usr/bin/cdrecord.mmap -v gracetime=2 dev=11,0,0 speed=4 -tao driveropts=burnfree -eject blank=fast Mandando essa linha de comando diretamente no prompt SEM especificar o dev=11,0,0 ela irah funcionar!! Meu /etc/cdrecord/cdrecord .. ################# CDR_DEVICE=cdrom CDR_FIFOSIZE=4m # drive name device speed fifosize driveropts cdrom= /dev/cdrom -1 -1 burnfree ############################################ Output do comando... # /usr/bin/cdrecord.mmap -v gracetime=2 speed=4 -tao driveropts=burnfree -eject blank=fast Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <[EMAIL PROTECTED]>. The original author should not be bothered with problems of this version. /usr/bin/cdrecord: Warning: Running on Linux-2.6.16 /usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer. /usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. TOC Type: 1 = CD-ROM scsidev: '/dev/cdrom' devname: '/dev/cdrom' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Using libscg version 'debian-0.8debian2'. /usr/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). Driveropts: 'burnfree' SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'MATSHITA' Identifikation : 'DVD-RAM UJ-822S ' Revision : '1.00' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A Profile: 0x0012 Profile: 0x001B Profile: 0x001A Profile: 0x0013 Profile: 0x0014 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO Drive buf size : 1310720 = 1280 KB Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11078 (97:34/22) ATIP start of lead out: 336075 (74:43/00) 1T speed low: 0 (reserved val 0) 1T speed high: 4 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12) power mult factor: 3 5 recommended erase/write power: 3 A1 values: 02 3A B0 A2 values: 5C C6 26 Disk type: Phase change Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Starting to write CD/DVD at speed 4 in real BLANK mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Performing OPC... Blanking PMA, TOC, pregap Blanking time: 0.042s Nao achei uma maneira de fazer com que o k3b deixe de enviar a especificacao do dispositivo... Acho que esta seria a solucao.. Obrigado pela atencao JA Tavares -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]