Quais os passos que voce esta usando para se conectar ? Em 13 de janeiro de 2013 00:53, Manoel Pedro de Araújo <mpara...@gmail.com>escreveu:
> mas nao conecta. fica o tempo todo conectando. quando está conectando ao > clicar com o mouse no icone o pc trava > > Em 13 de janeiro de 2013 01:41, Rodolfo <rof20...@gmail.com> escreveu: > > Segundo essa informacao, so falta voce conectar >> >> >> Em 12 de janeiro de 2013 18:44, Manoel Pedro de Araújo < >> mpara...@gmail.com> escreveu: >> >> Veja o resultado do comando >>> >>> lo no wireless extensions. >>> >>> eth0 no wireless extensions. >>> >>> ra0 Ralink STA ESSID:"" Nickname:"RT2860STA" >>> Mode:Auto Frequency=2.412 GHz Bit Rate=1 Mb/s >>> RTS thr:off Fragment thr:off >>> Encryption key:off >>> Link Quality=10/100 Signal level:0 dBm Noise level:0 dBm >>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >>> >>> pan0 no wireless extensions. >>> >>> Olha a placa de wireless está ativada vejamos todas as redes disponiveis >>> >>> Em 10 de janeiro de 2013 12:14, Rodolfo <rof20...@gmail.com> escreveu: >>> >>> Pra facilitar voce pode digitar iwconfig, no output desse comando voce >>>> sabera se sua placa esta ou nao instalada, lembrando sempre de ativar a sua >>>> placa via hardware (se for notebook), a maioria dos notebooks tem um botao >>>> / plug / switch na carcaça para ligar ou desligar a placa wireless. >>>> >>>> >>>> abraços. >>>> >>>> Em 10 de janeiro de 2013 10:25, Manoel Pedro de Araújo < >>>> mpara...@gmail.com> escreveu: >>>> >>>> veja o resultado >>>>> >>>>> l# dhclient --version >>>>> isc-dhclient-4.1.1-P1 >>>>> >>>>> >>>>> Em 9 de janeiro de 2013 19:52, Gunther Furtado >>>>> <gunfurt...@gmail.com>escreveu: >>>>> >>>>>> Em Qua, 2013-01-09 às 19:19 -0300, Manoel Pedro de Araújo escreveu: >>>>>> > # dpkg -l | grep dhcp >>>>>> > ii isc-dhcp-client 4.1.1-P1-15+squeeze6 >>>>>> > ISC DHCP client >>>>>> > ii isc-dhcp-common 4.1.1-P1-15+squeeze6 >>>>>> > common files used by all the isc-dhcp* packages >>>>>> > >>>>>> > >>>>>> >>>>>> o isc-dhcp-client já está instalado: >>>>>> >>>>>> qual é o resultado do comando (como admonistrador): >>>>>> >>>>>> # dhclient --version >>>>>> >>>>>> > # ifconfig >>>>>> > eth0 Link encap:Ethernet Endereço de HW 00:e0:91:48:bf:29 >>>>>> > UP BROADCASTMULTICAST MTU:1500 Métrica:1 >>>>>> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>>>>> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>>>>> > colisões:0 txqueuelen:1000 >>>>>> > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>>> > IRQ:27 Endereço de E/S:0x4000 >>>>>> > >>>>>> > lo Link encap:Loopback Local >>>>>> > inet end.: 127.0.0.1 Masc:255.0.0.0 >>>>>> > endereço inet6: ::1/128 Escopo:Máquina >>>>>> > UP LOOPBACKRUNNING MTU:16436 Métrica:1 >>>>>> > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 >>>>>> > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 >>>>>> > colisões:0 txqueuelen:0 >>>>>> > RX bytes:1616 (1.5 KiB) TX bytes:1616 (1.5 KiB) >>>>>> > >>>>>> > ppp0 Link encap:Protocolo Ponto-a-Ponto >>>>>> > inet end.: 177.49.170.194 P-a-P:10.64.64.64 >>>>>> > Masc:255.255.255.255 >>>>>> > UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 >>>>>> Métrica:1 >>>>>> > RX packets:99 errors:0 dropped:0 overruns:0 frame:0 >>>>>> > TX packets:98 errors:0 dropped:0 overruns:0 carrier:0 >>>>>> > colisões:0 txqueuelen:3 >>>>>> > RX bytes:77251 (75.4 KiB) TX bytes:9293 (9.0 KiB) >>>>>> > >>>>>> > ra0 Link encap:Ethernet Endereço de HW 48:5d:60:fc:1d:00 >>>>>> > endereço inet6: fe80::4a5d:60ff:fefc:1d00/64 Escopo:Link >>>>>> > UP BROADCASTMULTICAST MTU:1500 Métrica:1 >>>>>> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>>>>> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>>>>> > colisões:0 txqueuelen:1000 >>>>>> > RX bytes:1480 (1.4 KiB) TX bytes:0 (0.0 B) >>>>>> > IRQ:16 >>>>>> > >>>>>> >>>>>> >>>>>> ra0 é a sua placa de rede sem fio! >>>>>> >>>>>> Abra suas ferramentas de rede e veja o que ela diz sobre a ra0... >>>>>> >>>>>> >>>>>> > Em 9 de janeiro de 2013 18:58, Leandro <leandro.h.st...@gmail.com> >>>>>> > escreveu: >>>>>> > Manoel, >>>>>> > >>>>>> > Vc já checou o nome das interfaces??? >>>>>> > >>>>>> > No meu caso, desde o Debian 6.0.2, as interfaces passaram a >>>>>> > ser nomeadas como sendo ethX mesmo a wireless (antes era >>>>>> > wlan0). >>>>>> > >>>>>> > Execute um "ifconfig" para ver os nomes das interfaces, no >>>>>> meu >>>>>> > caso são listadas: eth0 (cabeada), eth1 (wireless) e lo >>>>>> > (Loopback) >>>>>> > >>>>>> > Abraço >>>>>> > >>>>>> > Leandro Henrique Stein >>>>>> > Analista de Informática >>>>>> >>>>>> >>>>>> > Claro: (41) 9935-9960 >>>>>> > Skype: leandro.h.stein >>>>>> > Twitter: @leandrohstein >>>>>> > >>>>>> > "Desculpar-se é um sinal de fraqueza. Exceto entre amigos" - >>>>>> > Leroy Jethro Gibbs >>>>>> > >>>>>> > Em 09-01-2013 18:46, Manoel Pedro de Araújo escreveu: >>>>>> > >>>>>> > Sim está funcionando a rede fio e a internet com >>>>>> modem >>>>>> > da tim. So não >>>>>> > funciona o weriless. >>>>>> > >>>>>> > ja compilei o drive rt3090. E fez foi sumir o wlan0 >>>>>> e >>>>>> > quero recuperar >>>>>> > >>>>>> > >>>>>> > Em 9 de janeiro de 2013 12:33, Gunther >>>>>> > Furtado<gunfurt...@gmail.com>escreveu: >>>>>> > >>>>>> > Em 09.01.2013, quarta, Manoel Pedro de >>>>>> Araújo >>>>>> > disse: >>>>>> > >>>>>> > Pela comando lspci encontrei >>>>>> > 02:00.0 Network controller: RaLink >>>>>> > RT3090 Wireless 802.11n 1T/1R PCIe >>>>>> > 03:00.0 Ethernet controller: Realtek >>>>>> > Semiconductor Co., Ltd. >>>>>> > RTL8111/8168B PCI Express Gigabit >>>>>> > Ethernet controller (rev 06) >>>>>> > >>>>>> > qual minha placa? >>>>>> > >>>>>> > Desculpe a minha confusão. A sua placa é a >>>>>> > RT3090. >>>>>> > >>>>>> > >>>>>> > vc já viu isso aqui: >>>>>> > >>>>>> http://linuxwireless.org/en/users/Drivers/rt2800pci?highlight=%28RT3090%29 >>>>>> > >>>>>> > abs., >>>>>> > >>>>>> > ps: a placa de rede com fio está >>>>>> funcionando? >>>>>> > >>>>>> > >>>>>> > >>>>>> > Em 8 de janeiro de 2013 19:26, >>>>>> Rogerio >>>>>> > Paixao >>>>>> > <rogeriojpai...@ymail.com>escreveu: >>>>>> > >>>>>> > Pessoal pode ser que já >>>>>> > conheçam esse site, mas ele >>>>>> é >>>>>> > excelente para >>>>>> > verificação dos drivers >>>>>> > >>>>>> > http://kmuto.jp/debian/hcl/ >>>>>> > >>>>>> > >>>>>> > >>>>>> ------------------------------ >>>>>> > *De:* Gunther >>>>>> > Furtado< >>>>>> gunfurt...@gmail.com> >>>>>> > *Para:* >>>>>> > >>>>>> debian-user-portuguese@lists.debian.org >>>>>> > *Enviadas:* Terça-feira, 8 >>>>>> de >>>>>> > Janeiro de 2013 19:51 >>>>>> > *Assunto:* Re: wlan0 >>>>>> > >>>>>> > Em 08.01.2013, terça, Manoel >>>>>> > Pedro de Araújo disse: >>>>>> > >>>>>> > ola, amigos, >>>>>> compilei >>>>>> > o drive rt3090 mas o >>>>>> > werilless nao >>>>>> conecta, >>>>>> > quando rodo >>>>>> > o comando * >>>>>> #ifconfig >>>>>> > wlan0* >>>>>> > >>>>>> > o resultado é >>>>>> > wlan0: erro obtendo >>>>>> > informações da >>>>>> > interface: %s: >>>>>> > dispositivo não >>>>>> > encontrado >>>>>> > >>>>>> > Alsabe como me >>>>>> ajudar? >>>>>> > >>>>>> > Manoel, >>>>>> > >>>>>> > O processo é parecido com o >>>>>> do >>>>>> > rt3090: descobrir qual sua >>>>>> > placa >>>>>> > wireless, pesquisar no >>>>>> google >>>>>> > por "placa debian" (sem as >>>>>> > aspas) e >>>>>> > seguir os links até descorir >>>>>> > um que funcione. >>>>>> > >>>>>> > boa sorte! >>>>>> > >>>>>> > >>>>>> > -- >>>>>> > Manoel >>>>>> > >>>>>> > >>>>>> > -- >>>>>> > >>>>>> > "Cuando la guática pide >>>>>> > comídica >>>>>> > Pone al cristiánico firme y >>>>>> > guerrérico >>>>>> > Por sus poróticos y sus >>>>>> > cebóllicas, >>>>>> > No hay regimiéntico que los >>>>>> > deténguica >>>>>> > Si tienen hámbrica los >>>>>> > populáricos." Violeta Parra >>>>>> > >>>>>> > Gunther Furtado >>>>>> > Curitiba - Paraná - Brasil >>>>>> > gunfurt...@gmail.com >>>>>> > skype:gunfurtado >>>>>> > >>>>>> > >>>>>> > -- >>>>>> > To UNSUBSCRIBE, email to >>>>>> > >>>>>> debian-user-portuguese-requ...@lists.debian.org with a subject of >>>>>> > "unsubscribe". Trouble? >>>>>> > Contact >>>>>> > listmas...@lists.debian.org >>>>>> > Archive: >>>>>> > >>>>>> http://lists.debian.org/20130108195151.59171...@shrknemo.gbmc.net >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > -- >>>>>> > Manoel >>>>>> > >>>>>> > >>>>>> > -- >>>>>> > >>>>>> > "Cuando la guática pide comídica >>>>>> > Pone al cristiánico firme y guerrérico >>>>>> > Por sus poróticos y sus cebóllicas, >>>>>> > No hay regimiéntico que los deténguica >>>>>> > Si tienen hámbrica los populáricos." Violeta >>>>>> > Parra >>>>>> > >>>>>> > Gunther Furtado >>>>>> > Curitiba - Paraná - Brasil >>>>>> > gunfurt...@gmail.com >>>>>> > skype:gunfurtado >>>>>> > >>>>>> > >>>>>> > -- >>>>>> > To UNSUBSCRIBE, email to >>>>>> > >>>>>> debian-user-portuguese-requ...@lists.debian.org >>>>>> > with a subject of "unsubscribe". Trouble? >>>>>> > Contact >>>>>> > listmas...@lists.debian.org >>>>>> > Archive: >>>>>> > >>>>>> http://lists.debian.org/20130109133354.4dd09...@shrknemo.gbmc.net >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- >>>>>> Gunther Furtado <gunfurt...@gmail.com> >>>>>> >>>>>> >>>>>> -- >>>>>> To UNSUBSCRIBE, email to >>>>>> debian-user-portuguese-requ...@lists.debian.org >>>>>> with a subject of "unsubscribe". Trouble? Contact >>>>>> listmas...@lists.debian.org >>>>>> Archive: >>>>>> http://lists.debian.org/1357771958.4157.3.ca...@lapido.gbcm.net >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Manoel >>>> >>>> >>>> >>> >>> >>> -- >>> Manoel >> >> >> > > > -- > Manoel
