Dou um clique ícone da rede para conectar. Em 14 de janeiro de 2013 09:03, Rodolfo <rof20...@gmail.com> escreveu:
> Quais os passos que voce esta usando para se conectar ? > > Em 13 de janeiro de 2013 00:53, Manoel Pedro de Araújo <mpara...@gmail.com > > escreveu: > > mas nao conecta. fica o tempo todo conectando. quando está conectando ao >> clicar com o mouse no icone o pc trava >> >> Em 13 de janeiro de 2013 01:41, Rodolfo <rof20...@gmail.com> escreveu: >> >> Segundo essa informacao, so falta voce conectar >>> >>> >>> Em 12 de janeiro de 2013 18:44, Manoel Pedro de Araújo < >>> mpara...@gmail.com> escreveu: >>> >>> Veja o resultado do comando >>>> >>>> lo no wireless extensions. >>>> >>>> eth0 no wireless extensions. >>>> >>>> ra0 Ralink STA ESSID:"" Nickname:"RT2860STA" >>>> Mode:Auto Frequency=2.412 GHz Bit Rate=1 Mb/s >>>> RTS thr:off Fragment thr:off >>>> Encryption key:off >>>> Link Quality=10/100 Signal level:0 dBm Noise level:0 dBm >>>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >>>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >>>> >>>> pan0 no wireless extensions. >>>> >>>> Olha a placa de wireless está ativada vejamos todas as redes disponiveis >>>> >>>> Em 10 de janeiro de 2013 12:14, Rodolfo <rof20...@gmail.com> escreveu: >>>> >>>> Pra facilitar voce pode digitar iwconfig, no output desse comando voce >>>>> sabera se sua placa esta ou nao instalada, lembrando sempre de ativar a >>>>> sua >>>>> placa via hardware (se for notebook), a maioria dos notebooks tem um botao >>>>> / plug / switch na carcaça para ligar ou desligar a placa wireless. >>>>> >>>>> >>>>> abraços. >>>>> >>>>> Em 10 de janeiro de 2013 10:25, Manoel Pedro de Araújo < >>>>> mpara...@gmail.com> escreveu: >>>>> >>>>> veja o resultado >>>>>> >>>>>> l# dhclient --version >>>>>> isc-dhclient-4.1.1-P1 >>>>>> >>>>>> >>>>>> Em 9 de janeiro de 2013 19:52, Gunther Furtado >>>>>> <gunfurt...@gmail.com>escreveu: >>>>>> >>>>>>> Em Qua, 2013-01-09 às 19:19 -0300, Manoel Pedro de Araújo escreveu: >>>>>>> > # dpkg -l | grep dhcp >>>>>>> > ii isc-dhcp-client 4.1.1-P1-15+squeeze6 >>>>>>> > ISC DHCP client >>>>>>> > ii isc-dhcp-common 4.1.1-P1-15+squeeze6 >>>>>>> > common files used by all the isc-dhcp* packages >>>>>>> > >>>>>>> > >>>>>>> >>>>>>> o isc-dhcp-client já está instalado: >>>>>>> >>>>>>> qual é o resultado do comando (como admonistrador): >>>>>>> >>>>>>> # dhclient --version >>>>>>> >>>>>>> > # ifconfig >>>>>>> > eth0 Link encap:Ethernet Endereço de HW 00:e0:91:48:bf:29 >>>>>>> > UP BROADCASTMULTICAST MTU:1500 Métrica:1 >>>>>>> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>>>>>> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>>>>>> > colisões:0 txqueuelen:1000 >>>>>>> > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>>>> > IRQ:27 Endereço de E/S:0x4000 >>>>>>> > >>>>>>> > lo Link encap:Loopback Local >>>>>>> > inet end.: 127.0.0.1 Masc:255.0.0.0 >>>>>>> > endereço inet6: ::1/128 Escopo:Máquina >>>>>>> > UP LOOPBACKRUNNING MTU:16436 Métrica:1 >>>>>>> > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 >>>>>>> > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 >>>>>>> > colisões:0 txqueuelen:0 >>>>>>> > RX bytes:1616 (1.5 KiB) TX bytes:1616 (1.5 KiB) >>>>>>> > >>>>>>> > ppp0 Link encap:Protocolo Ponto-a-Ponto >>>>>>> > inet end.: 177.49.170.194 P-a-P:10.64.64.64 >>>>>>> > Masc:255.255.255.255 >>>>>>> > UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 >>>>>>> Métrica:1 >>>>>>> > RX packets:99 errors:0 dropped:0 overruns:0 frame:0 >>>>>>> > TX packets:98 errors:0 dropped:0 overruns:0 carrier:0 >>>>>>> > colisões:0 txqueuelen:3 >>>>>>> > RX bytes:77251 (75.4 KiB) TX bytes:9293 (9.0 KiB) >>>>>>> > >>>>>>> > ra0 Link encap:Ethernet Endereço de HW 48:5d:60:fc:1d:00 >>>>>>> > endereço inet6: fe80::4a5d:60ff:fefc:1d00/64 Escopo:Link >>>>>>> > UP BROADCASTMULTICAST MTU:1500 Métrica:1 >>>>>>> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>>>>>> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>>>>>> > colisões:0 txqueuelen:1000 >>>>>>> > RX bytes:1480 (1.4 KiB) TX bytes:0 (0.0 B) >>>>>>> > IRQ:16 >>>>>>> > >>>>>>> >>>>>>> >>>>>>> ra0 é a sua placa de rede sem fio! >>>>>>> >>>>>>> Abra suas ferramentas de rede e veja o que ela diz sobre a ra0... >>>>>>> >>>>>>> >>>>>>> > Em 9 de janeiro de 2013 18:58, Leandro <leandro.h.st...@gmail.com> >>>>>>> > escreveu: >>>>>>> > Manoel, >>>>>>> > >>>>>>> > Vc já checou o nome das interfaces??? >>>>>>> > >>>>>>> > No meu caso, desde o Debian 6.0.2, as interfaces passaram a >>>>>>> > ser nomeadas como sendo ethX mesmo a wireless (antes era >>>>>>> > wlan0). >>>>>>> > >>>>>>> > Execute um "ifconfig" para ver os nomes das interfaces, no >>>>>>> meu >>>>>>> > caso são listadas: eth0 (cabeada), eth1 (wireless) e lo >>>>>>> > (Loopback) >>>>>>> > >>>>>>> > Abraço >>>>>>> > >>>>>>> > Leandro Henrique Stein >>>>>>> > Analista de Informática >>>>>>> >>>>>>> >>>>>>> > Claro: (41) 9935-9960 >>>>>>> > Skype: leandro.h.stein >>>>>>> > Twitter: @leandrohstein >>>>>>> > >>>>>>> > "Desculpar-se é um sinal de fraqueza. Exceto entre amigos" >>>>>>> - >>>>>>> > Leroy Jethro Gibbs >>>>>>> > >>>>>>> > Em 09-01-2013 18:46, Manoel Pedro de Araújo escreveu: >>>>>>> > >>>>>>> > Sim está funcionando a rede fio e a internet com >>>>>>> modem >>>>>>> > da tim. So não >>>>>>> > funciona o weriless. >>>>>>> > >>>>>>> > ja compilei o drive rt3090. E fez foi sumir o >>>>>>> wlan0 e >>>>>>> > quero recuperar >>>>>>> > >>>>>>> > >>>>>>> > Em 9 de janeiro de 2013 12:33, Gunther >>>>>>> > Furtado<gunfurt...@gmail.com>escreveu: >>>>>>> > >>>>>>> > Em 09.01.2013, quarta, Manoel Pedro de >>>>>>> Araújo >>>>>>> > disse: >>>>>>> > >>>>>>> > Pela comando lspci encontrei >>>>>>> > 02:00.0 Network controller: RaLink >>>>>>> > RT3090 Wireless 802.11n 1T/1R PCIe >>>>>>> > 03:00.0 Ethernet controller: >>>>>>> Realtek >>>>>>> > Semiconductor Co., Ltd. >>>>>>> > RTL8111/8168B PCI Express Gigabit >>>>>>> > Ethernet controller (rev 06) >>>>>>> > >>>>>>> > qual minha placa? >>>>>>> > >>>>>>> > Desculpe a minha confusão. A sua placa é a >>>>>>> > RT3090. >>>>>>> > >>>>>>> > >>>>>>> > vc já viu isso aqui: >>>>>>> > >>>>>>> http://linuxwireless.org/en/users/Drivers/rt2800pci?highlight=%28RT3090%29 >>>>>>> > >>>>>>> > abs., >>>>>>> > >>>>>>> > ps: a placa de rede com fio está >>>>>>> funcionando? >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > Em 8 de janeiro de 2013 19:26, >>>>>>> Rogerio >>>>>>> > Paixao >>>>>>> > <rogeriojpai...@ymail.com >>>>>>> >escreveu: >>>>>>> > >>>>>>> > Pessoal pode ser que já >>>>>>> > conheçam esse site, mas >>>>>>> ele é >>>>>>> > excelente para >>>>>>> > verificação dos drivers >>>>>>> > >>>>>>> > >>>>>>> http://kmuto.jp/debian/hcl/ >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> ------------------------------ >>>>>>> > *De:* Gunther >>>>>>> > Furtado< >>>>>>> gunfurt...@gmail.com> >>>>>>> > *Para:* >>>>>>> > >>>>>>> debian-user-portuguese@lists.debian.org >>>>>>> > *Enviadas:* Terça-feira, 8 >>>>>>> de >>>>>>> > Janeiro de 2013 19:51 >>>>>>> > *Assunto:* Re: wlan0 >>>>>>> > >>>>>>> > Em 08.01.2013, terça, >>>>>>> Manoel >>>>>>> > Pedro de Araújo disse: >>>>>>> > >>>>>>> > ola, amigos, >>>>>>> compilei >>>>>>> > o drive rt3090 mas >>>>>>> o >>>>>>> > werilless nao >>>>>>> conecta, >>>>>>> > quando rodo >>>>>>> > o comando * >>>>>>> #ifconfig >>>>>>> > wlan0* >>>>>>> > >>>>>>> > o resultado é >>>>>>> > wlan0: erro obtendo >>>>>>> > informações da >>>>>>> > interface: %s: >>>>>>> > dispositivo não >>>>>>> > encontrado >>>>>>> > >>>>>>> > Alsabe como me >>>>>>> ajudar? >>>>>>> > >>>>>>> > Manoel, >>>>>>> > >>>>>>> > O processo é parecido com >>>>>>> o do >>>>>>> > rt3090: descobrir qual sua >>>>>>> > placa >>>>>>> > wireless, pesquisar no >>>>>>> google >>>>>>> > por "placa debian" (sem as >>>>>>> > aspas) e >>>>>>> > seguir os links até >>>>>>> descorir >>>>>>> > um que funcione. >>>>>>> > >>>>>>> > boa sorte! >>>>>>> > >>>>>>> > >>>>>>> > -- >>>>>>> > Manoel >>>>>>> > >>>>>>> > >>>>>>> > -- >>>>>>> > >>>>>>> > "Cuando la guática pide >>>>>>> > comídica >>>>>>> > Pone al cristiánico firme y >>>>>>> > guerrérico >>>>>>> > Por sus poróticos y sus >>>>>>> > cebóllicas, >>>>>>> > No hay regimiéntico que los >>>>>>> > deténguica >>>>>>> > Si tienen hámbrica los >>>>>>> > populáricos." Violeta Parra >>>>>>> > >>>>>>> > Gunther Furtado >>>>>>> > Curitiba - Paraná - Brasil >>>>>>> > gunfurt...@gmail.com >>>>>>> > skype:gunfurtado >>>>>>> > >>>>>>> > >>>>>>> > -- >>>>>>> > To UNSUBSCRIBE, email to >>>>>>> > >>>>>>> debian-user-portuguese-requ...@lists.debian.org with a subject of >>>>>>> > "unsubscribe". Trouble? >>>>>>> > Contact >>>>>>> > >>>>>>> listmas...@lists.debian.org >>>>>>> > Archive: >>>>>>> > >>>>>>> http://lists.debian.org/20130108195151.59171...@shrknemo.gbmc.net >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > -- >>>>>>> > Manoel >>>>>>> > >>>>>>> > >>>>>>> > -- >>>>>>> > >>>>>>> > "Cuando la guática pide comídica >>>>>>> > Pone al cristiánico firme y guerrérico >>>>>>> > Por sus poróticos y sus cebóllicas, >>>>>>> > No hay regimiéntico que los deténguica >>>>>>> > Si tienen hámbrica los populáricos." >>>>>>> Violeta >>>>>>> > Parra >>>>>>> > >>>>>>> > Gunther Furtado >>>>>>> > Curitiba - Paraná - Brasil >>>>>>> > gunfurt...@gmail.com >>>>>>> > skype:gunfurtado >>>>>>> > >>>>>>> > >>>>>>> > -- >>>>>>> > To UNSUBSCRIBE, email to >>>>>>> > >>>>>>> debian-user-portuguese-requ...@lists.debian.org >>>>>>> > with a subject of "unsubscribe". Trouble? >>>>>>> > Contact >>>>>>> > listmas...@lists.debian.org >>>>>>> > Archive: >>>>>>> > >>>>>>> http://lists.debian.org/20130109133354.4dd09...@shrknemo.gbmc.net >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> -- >>>>>>> Gunther Furtado <gunfurt...@gmail.com> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> To UNSUBSCRIBE, email to >>>>>>> debian-user-portuguese-requ...@lists.debian.org >>>>>>> with a subject of "unsubscribe". Trouble? Contact >>>>>>> listmas...@lists.debian.org >>>>>>> Archive: >>>>>>> http://lists.debian.org/1357771958.4157.3.ca...@lapido.gbcm.net >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Manoel >>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> Manoel >>> >>> >>> >> >> >> -- >> Manoel > > > -- Manoel
