Tal y como se puede ver en el archivo adjunto (resultados de dmesg) tengo varios errores, el primero esta en la linea 14, el segundo en la 31, el tercero en la 32 y por ultimo, no creo que sea ning�n error, que es la linea 38?
gr�cias, J. Parera
Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory structure at 0x000fd970 pcibios_init : BIOS32 Service Directory entry at 0xfd981 pcibios_init : PCI BIOS revision 2.10 entry at 0xfd9bc Probing PCI hardware. Calibrating delay loop.. ok - 47.82 BogoMIPS Memory: 28464k/30720k available (964k kernel code, 384k reserved, 908k data) Swansea University Computer Society NET3.035 for Linux 2.0 NET3: Unix domain sockets 0.13 for Linux NET3.035. Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: ICMP, UDP, TCP VFS: Diskquotas version dquot_5.6.0 initialized Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 2.0.29 ([EMAIL PROTECTED]) (gcc version 2.7.2.2) #3 Sat May 31 13:35:27 EST 1997 Real Time Clock Driver v1.07 tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $ tpqic02: DMA buffers: 20 blocks, at address 0x243800 (0x24361c) Ramdisk driver initialized : 16 ramdisks of 4096K size loop: registered device at major 7 hda: QUANTUM BIGFOOT1280A, 1226MB w/87kB Cache, LBA, CHS=623/64/63 hdb: IBM-DAQA-33240, 3098MB w/96kB Cache, LBA, CHS=787/128/63 hdc: HITACHI CDR-7930, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 Floppy drive(s): fd0 is 1.44M Started kswapd v 1.4.2.2 FDC 0 is a post-1991 82077 md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8 Failed initialization of WD-7000 SCSI card! PPA: unable to initialise controller at 0x378, error 1 scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hdb: hdb1 hdb2 < hdb5 > hdb3 hdb4 VFS: Mounted root (ext2 filesystem) readonly. Adding Swap: 36284k swap-space PS/2 auxiliary pointing device detected -- driver installed. Module inserted $Id: cdrom.c,v 0.8 1996/08/10 10:52:11 david Exp $ Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A tty02 at 0x03e8 (irq = 4) is a 16550A
