On 28 Sep 2002 15:43:48 +0200 Mariano Kamp <[EMAIL PROTECTED]> wrote:
> Hi Hanasaki, > > > I would not assume that the settings are the same. > > > > Run 'make menuconfig' and check > > > > Be sure of the following are compiled into the kernel: > > ext2, ext3, reiserfs > > ide & scsi support for your ide/scsi chips/boards > Well, as I am trying this for three weeks now and tried more than > thirty different kernels. I am not going to follow this path. > > My question is: How can I get the settings for the kernel shipped with > woody (24.18-bf). It works. And I can start from there. > > Or .. Would it help to go to a newer version than woody? Would it have > xfree 4.2 and acpi already built in? > > > > > How are you getting to a shell to check /var/log <which is a > > directory not a file???> to look for messages if the kernel panics > > and halts? > > > Because I kept the standard kernel and added it to lilo. So I am able > to resurrect the system, but obviously without the features I need > (acpi). > > > If you need more specific help, provide more specifics on your > > process and StepByStep results. > > > I did this a couple of times. See other postings. > > As I am very much suspecting the procedures to be the source of > trouble(why else should not even one of my roll your own kernels work) > I will go into the details again. > > > apt-get remove kernel-source-2.4.18 kernel-package > rm -rf /usr/src/linux > rm -rf /usr/src/kernel-source-2.4.18.tar.bz2 > rm -rf /lib/modules/2.4.18 > > apt-get install kernel-source-2.4.18 kernel-package > cd /usr/src > tar xvjf kernel-source-2.4.18.tar.bz2 > ln -s kernel-source-2.4.18.tar.bz2 linux > cd linux > > make-kpkg clean > make-kpkg -config=x --revision=sonyVaioGrx316G kernel_image > dpkg -i /usr/src/kernel-image-2.4.18_sonyVaioGrx316G_i386.deb > > reboot > > > Hopefully I got the steps right. > > ACPI patch and other necessary things have been left out since two > weeks to reduce complexity. > I also attached the current .config file. But this doesn't make much > difference as no config has worked so far. But as this one is a clean > and untouched one, we probably can start from there. The only thing I > changed is: > > CONFIG_IDE=y > CONFIG_EXT3_FS=y > > > Any help is appreciated. > > Mariano > > > > > On Sat, 2002-09-28 at 01:54, Hanasaki JiJi wrote: > > I would not assume that the settings are the same. > > > > Run 'make menuconfig' and check > > > > Be sure of the following are compiled into the kernel: > > ext2, ext3, reiserfs > > ide & scsi support for your ide/scsi chips/boards > > > > Verify that your lilo.conf has the right settings for partitions and > > kernel file from the dpkg -i yourkernel.deb > > > > How are you getting to a shell to check /var/log <which is a > > directory not a file???> to look for messages if the kernel panics > > and halts? > > > > If you need more specific help, provide more specifics on your > > process and StepByStep results. > > > > Mariano Kamp wrote: > > > Hi, > > > > > > I still haven't given up yet to compile my own kernel, but I am > > > nearly there. Meanhwile I removed the kernel and the kernel > > > source packages and installed them again. But even from the > > > scratch without changing anything I get a kernel panic from my > > > compiled kernel. Aren't the default settings being supposed to be > > > the same as the standard kernel shipped? The standard kernel is > > > working though. > > > > > > Problem is it doesn't support acpi out of the box and afaik I > > > need acpi if I don't want to burn the processor on this > > > particular machine(as described on linux-laptop.org). > > > > > > For the record .. I am using woody on a sony vaio grx316g. > > > > > > Btw. I also bought a null modem cabel to get the console > > > messages from the kernel before the panic, but unfortunately I > > > found out that my laptop has three usb, and firewire and ..., > > > but not a serial port :-( Are there any other ways to see the > > > kernel messages? I believe that the file system is not mounted > > > at that point in time and probably because of that I don't see > > > any relevant messages below /var/log. > > > > > > Cheers, > > > Mariano > > > > > > > > > > > > > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > > [EMAIL PROTECTED] > > > > # > # Automatically generated make config: don't edit > # > CONFIG_X86=y > CONFIG_ISA=y > # CONFIG_SBUS is not set > CONFIG_UID16=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODVERSIONS=y > # CONFIG_KMOD is not set > > # > # Processor type and features > # > CONFIG_M386=y > # CONFIG_M486 is not set > # CONFIG_M586 is not set > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > # CONFIG_MPENTIUMIII is not set > # CONFIG_MPENTIUM4 is not set > # CONFIG_MK6 is not set > # CONFIG_MK7 is not set > # CONFIG_MELAN is not set > # CONFIG_MCRUSOE is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP2 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MCYRIXIII is not set > # CONFIG_X86_CMPXCHG is not set > # CONFIG_X86_XADD is not set > CONFIG_X86_L1_CACHE_SHIFT=4 > CONFIG_RWSEM_GENERIC_SPINLOCK=y > # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set > CONFIG_X86_PPRO_FENCE=y > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > # CONFIG_MICROCODE is not set > # CONFIG_X86_MSR is not set > # CONFIG_X86_CPUID is not set > CONFIG_NOHIGHMEM=y > # CONFIG_HIGHMEM4G is not set > # CONFIG_HIGHMEM64G is not set > CONFIG_MATH_EMULATION=y > # CONFIG_MTRR is not set > # CONFIG_SMP is not set > # CONFIG_X86_UP_APIC is not set > > # > # General setup > # > CONFIG_NET=y > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > # CONFIG_PCI_NAMES is not set > # CONFIG_EISA is not set > # CONFIG_MCA is not set > # CONFIG_HOTPLUG is not set > # CONFIG_PCMCIA is not set > # CONFIG_HOTPLUG_PCI is not set > CONFIG_SYSVIPC=y > # CONFIG_BSD_PROCESS_ACCT is not set > # CONFIG_SYSCTL is not set > CONFIG_KCORE_ELF=y > # CONFIG_KCORE_AOUT is not set > CONFIG_BINFMT_AOUT=m > CONFIG_BINFMT_ELF=y > # CONFIG_BINFMT_MISC is not set > # CONFIG_PM is not set > # CONFIG_APM_IGNORE_USER_SUSPEND is not set > # CONFIG_APM_DO_ENABLE is not set > # CONFIG_APM_CPU_IDLE is not set > # CONFIG_APM_DISPLAY_BLANK is not set > # CONFIG_APM_RTC_IS_GMT is not set > # CONFIG_APM_ALLOW_INTS is not set > # CONFIG_APM_REAL_MODE_POWER_OFF is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play configuration > # > # CONFIG_PNP is not set > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > CONFIG_BLK_DEV_XD=m > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > CONFIG_BLK_DEV_LOOP=m > # CONFIG_BLK_DEV_NBD is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_SIZE=4096 > CONFIG_BLK_DEV_INITRD=y > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Networking options > # > # CONFIG_PACKET is not set > # CONFIG_NETLINK_DEV is not set > # CONFIG_NETFILTER is not set > # CONFIG_FILTER is not set > # CONFIG_UNIX is not set > CONFIG_INET=y > # CONFIG_IP_MULTICAST is not set > # CONFIG_IP_ADVANCED_ROUTER is not set > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_ARPD is not set > # CONFIG_INET_ECN is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_IPV6 is not set > # CONFIG_KHTTPD is not set > # CONFIG_ATM is not set > # CONFIG_VLAN_8021Q is not set > > # > # > # > CONFIG_IPX=m > # CONFIG_IPX_INTERN is not set > CONFIG_ATALK=m > # CONFIG_DECNET is not set > # CONFIG_BRIDGE is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_LLC is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > # CONFIG_NET_FASTROUTE is not set > # CONFIG_NET_HW_FLOWCONTROL is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # ATA/IDE/MFM/RLL support > # > # CONFIG_IDE is not set > CONFIG_IDE=y > # CONFIG_BLK_DEV_IDE_MODES is not set > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI support > # > CONFIG_SCSI=m > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=m > CONFIG_SD_EXTRA_DEVS=40 > CONFIG_CHR_DEV_ST=m > # CONFIG_CHR_DEV_OSST is not set > CONFIG_BLK_DEV_SR=m > # CONFIG_BLK_DEV_SR_VENDOR is not set > CONFIG_SR_EXTRA_DEVS=2 > CONFIG_CHR_DEV_SG=m > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_DEBUG_QUEUES is not set > CONFIG_SCSI_MULTI_LUN=y > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > CONFIG_SCSI_7000FASST=m > # CONFIG_SCSI_ACARD is not set > CONFIG_SCSI_AHA152X=m > CONFIG_SCSI_AHA1542=m > CONFIG_SCSI_AHA1740=m > # CONFIG_SCSI_AACRAID is not set > CONFIG_SCSI_AIC7XXX=m > CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 > CONFIG_AIC7XXX_RESET_DELAY_MS=15000 > # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_DPT_I2O is not set > CONFIG_SCSI_ADVANSYS=m > CONFIG_SCSI_IN2000=m > CONFIG_SCSI_AM53C974=m > # CONFIG_SCSI_MEGARAID is not set > CONFIG_SCSI_BUSLOGIC=m > # CONFIG_SCSI_OMIT_FLASHPOINT is not set > # CONFIG_SCSI_CPQFCTS is not set > # CONFIG_SCSI_DMX3191D is not set > CONFIG_SCSI_DTC3280=m > CONFIG_SCSI_EATA=m > # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set > # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set > CONFIG_SCSI_EATA_MAX_TAGS=16 > CONFIG_SCSI_EATA_DMA=m > CONFIG_SCSI_EATA_PIO=m > CONFIG_SCSI_FUTURE_DOMAIN=m > # CONFIG_SCSI_GDTH is not set > CONFIG_SCSI_GENERIC_NCR5380=m > # CONFIG_SCSI_GENERIC_NCR53C400 is not set > CONFIG_SCSI_G_NCR5380_PORT=y > # CONFIG_SCSI_G_NCR5380_MEM is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > CONFIG_SCSI_NCR53C406A=m > CONFIG_SCSI_NCR53C7xx=m > # CONFIG_SCSI_NCR53C7xx_sync is not set > CONFIG_SCSI_NCR53C7xx_FAST=y > CONFIG_SCSI_NCR53C7xx_DISCONNECT=y > # CONFIG_SCSI_SYM53C8XX_2 is not set > CONFIG_SCSI_NCR53C8XX=m > # CONFIG_SCSI_SYM53C8XX is not set > CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 > CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 > CONFIG_SCSI_NCR53C8XX_SYNC=20 > # CONFIG_SCSI_NCR53C8XX_PROFILE is not set > # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set > # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set > CONFIG_SCSI_PAS16=m > # CONFIG_SCSI_PCI2000 is not set > # CONFIG_SCSI_PCI2220I is not set > # CONFIG_SCSI_PSI240I is not set > CONFIG_SCSI_QLOGIC_FAS=m > CONFIG_SCSI_QLOGIC_ISP=m > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > CONFIG_SCSI_SEAGATE=m > # CONFIG_SCSI_SIM710 is not set > # CONFIG_SCSI_SYM53C416 is not set > # CONFIG_SCSI_DC390T is not set > CONFIG_SCSI_T128=m > CONFIG_SCSI_U14_34F=m > # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set > CONFIG_SCSI_U14_34F_MAX_TAGS=8 > CONFIG_SCSI_ULTRASTOR=m > # CONFIG_SCSI_DEBUG is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_BOOT is not set > # CONFIG_FUSION_ISENSE is not set > # CONFIG_FUSION_CTL is not set > # CONFIG_FUSION_LAN is not set > > # > # IEEE 1394 (FireWire) support (EXPERIMENTAL) > # > # CONFIG_IEEE1394 is not set > > # > # I2O device support > # > # CONFIG_I2O is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > > # > # ARCnet devices > # > CONFIG_ARCNET=m > # CONFIG_ARCNET_1201 is not set > CONFIG_ARCNET_1051=m > # CONFIG_ARCNET_RAW is not set > # CONFIG_ARCNET_COM90xx is not set > # CONFIG_ARCNET_COM90xxIO is not set > # CONFIG_ARCNET_RIM_I is not set > # CONFIG_ARCNET_COM20020 is not set > > # > # Appletalk devices > # > # CONFIG_APPLETALK is not set > # CONFIG_LTPC is not set > # CONFIG_COPS is not set > # CONFIG_IPDDP is not set > CONFIG_DUMMY=m > # CONFIG_BONDING is not set > CONFIG_EQUALIZER=m > # CONFIG_TUN is not set > # CONFIG_ETHERTAP is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > CONFIG_NET_VENDOR_3COM=y > CONFIG_EL1=m > CONFIG_EL2=m > CONFIG_ELPLUS=m > CONFIG_EL16=m > CONFIG_EL3=m > # CONFIG_3C515 is not set > CONFIG_VORTEX=m > CONFIG_LANCE=y > CONFIG_NET_VENDOR_SMC=y > CONFIG_WD80x3=m > CONFIG_ULTRA=m > CONFIG_SMC9194=m > # CONFIG_NET_VENDOR_RACAL is not set > CONFIG_AT1700=m > CONFIG_DEPCA=m > CONFIG_HP100=m > CONFIG_NET_ISA=y > CONFIG_E2100=m > CONFIG_EWRK3=m > CONFIG_EEXPRESS=m > CONFIG_EEXPRESS_PRO=m > CONFIG_HPLAN_PLUS=m > CONFIG_HPLAN=m > # CONFIG_LP486E is not set > CONFIG_ETH16I=m > CONFIG_NE2000=m > # CONFIG_NET_PCI is not set > CONFIG_NET_POCKET=y > CONFIG_ATP=y > CONFIG_DE600=m > CONFIG_DE620=m > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_SK98LIN is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > CONFIG_PPP=m > # CONFIG_PPP_MULTILINK is not set > # CONFIG_PPP_ASYNC is not set > # CONFIG_PPP_SYNC_TTY is not set > # CONFIG_PPP_DEFLATE is not set > # CONFIG_PPP_BSDCOMP is not set > # CONFIG_PPPOE is not set > CONFIG_SLIP=m > CONFIG_SLIP_COMPRESSED=y > CONFIG_SLIP_SMART=y > # CONFIG_SLIP_MODE_SLIP6 is not set > > # > # Wireless LAN (non-hamradio) > # > CONFIG_NET_RADIO=y > CONFIG_STRIP=m > CONFIG_WAVELAN=m > # CONFIG_ARLAN is not set > # CONFIG_AIRONET4500 is not set > # CONFIG_AIRO is not set > # CONFIG_HERMES is not set > > # > # Wireless Pcmcia cards support > # > # CONFIG_AIRO_CS is not set > CONFIG_NET_WIRELESS=y > > # > # Token Ring devices > # > CONFIG_TR=y > CONFIG_IBMTR=m > # CONFIG_IBMOL is not set > # CONFIG_IBMLS is not set > # CONFIG_TMS380TR is not set > # CONFIG_SMCTR is not set > # CONFIG_NET_FC is not set > # CONFIG_RCPCI is not set > # CONFIG_SHAPER is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > > # > # Amateur Radio support > # > # CONFIG_HAMRADIO is not set > > # > # IrDA (infrared) support > # > # CONFIG_IRDA is not set > > # > # ISDN subsystem > # > CONFIG_ISDN=m > CONFIG_ISDN_PPP=y > CONFIG_ISDN_PPP_VJ=y > CONFIG_ISDN_MPP=y > # CONFIG_ISDN_PPP_BSDCOMP is not set > CONFIG_ISDN_AUDIO=y > # CONFIG_ISDN_TTY_FAX is not set > > # > # ISDN feature submodules > # > # CONFIG_ISDN_DRV_LOOP is not set > # CONFIG_ISDN_DIVERSION is not set > > # > # low-level hardware drivers > # > > # > # Passive ISDN cards > # > # CONFIG_ISDN_DRV_HISAX is not set > > # > # Active ISDN cards > # > CONFIG_ISDN_DRV_ICN=m > CONFIG_ISDN_DRV_PCBIT=m > # CONFIG_ISDN_DRV_SC is not set > # CONFIG_ISDN_DRV_ACT2000 is not set > # CONFIG_ISDN_DRV_EICON is not set > # CONFIG_ISDN_DRV_TPAM is not set > # CONFIG_ISDN_CAPI is not set > # CONFIG_HYSDN is not set > > # > # Old CD-ROM drivers (not SCSI, not IDE) > # > CONFIG_CD_NO_IDESCSI=y > CONFIG_AZTCD=m > CONFIG_GSCD=m > CONFIG_SBPCD=m > CONFIG_MCD=m > CONFIG_MCD_IRQ=11 > CONFIG_MCD_BASE=300 > CONFIG_MCDX=m > CONFIG_OPTCD=m > CONFIG_CM206=m > CONFIG_SJCD=m > CONFIG_ISP16_CDI=m > CONFIG_CDU31A=m > CONFIG_CDU535=m > > # > # Input core support > # > # CONFIG_INPUT is not set > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > > # > # Character devices > # > # CONFIG_VT is not set > CONFIG_SERIAL=m > # CONFIG_SERIAL_EXTENDED is not set > # CONFIG_SERIAL_NONSTANDARD is not set > # CONFIG_UNIX98_PTYS is not set > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # Mice > # > CONFIG_BUSMOUSE=m > CONFIG_ATIXL_BUSMOUSE=m > # CONFIG_LOGIBUSMOUSE is not set > CONFIG_MS_BUSMOUSE=m > CONFIG_MOUSE=y > CONFIG_PSMOUSE=m > CONFIG_82C710_MOUSE=y > # CONFIG_PC110_PAD is not set > > # > # Joysticks > # > # CONFIG_INPUT_GAMEPORT is not set > > # > # Input core support is needed for gameports > # > > # > # Input core support is needed for joysticks > # > # CONFIG_QIC02_TAPE is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_INTEL_RNG is not set > # CONFIG_NVRAM is not set > # CONFIG_RTC is not set > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > # CONFIG_SONYPI is not set > > # > # Ftape, the floppy tape device driver > # > CONFIG_FTAPE=m > # CONFIG_ZFTAPE is not set > CONFIG_FT_NR_BUFFERS=3 > # CONFIG_FT_PROC_FS is not set > CONFIG_FT_NORMAL_DEBUG=y > # CONFIG_FT_FULL_DEBUG is not set > # CONFIG_FT_NO_TRACE is not set > # CONFIG_FT_NO_TRACE_AT_ALL is not set > > # > # Hardware configuration > # > CONFIG_FT_STD_FDC=y > # CONFIG_FT_MACH2 is not set > # CONFIG_FT_PROBE_FC10 is not set > # CONFIG_FT_ALT_FDC is not set > CONFIG_FT_FDC_THR=8 > CONFIG_FT_FDC_MAX_RATE=2000 > CONFIG_FT_ALPHA_CLOCK=0 > # CONFIG_AGP is not set > # CONFIG_DRM is not set > # CONFIG_MWAVE is not set > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # File systems > # > # CONFIG_QUOTA is not set > # CONFIG_AUTOFS_FS is not set > # CONFIG_AUTOFS4_FS is not set > # CONFIG_REISERFS_FS is not set > # CONFIG_ADFS_FS is not set > CONFIG_AFFS_FS=m > # CONFIG_HFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EXT3_FS is not set > CONFIG_EXT3_FS=y > # CONFIG_JBD is not set > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > CONFIG_UMSDOS_FS=m > CONFIG_VFAT_FS=m > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_TMPFS is not set > # CONFIG_RAMFS is not set > CONFIG_ISO9660_FS=m > # CONFIG_JOLIET is not set > # CONFIG_ZISOFS is not set > CONFIG_MINIX_FS=y > # CONFIG_VXFS_FS is not set > # CONFIG_NTFS_FS is not set > CONFIG_HPFS_FS=m > CONFIG_PROC_FS=y > # CONFIG_DEVFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_EXT2_FS=y > CONFIG_SYSV_FS=m > # CONFIG_UDF_FS is not set > CONFIG_UFS_FS=m > # CONFIG_UFS_FS_WRITE is not set > > # > # Network File Systems > # > # CONFIG_CODA_FS is not set > # CONFIG_INTERMEZZO_FS is not set > CONFIG_NFS_FS=m > # CONFIG_NFS_V3 is not set > # CONFIG_NFSD is not set > CONFIG_SUNRPC=m > CONFIG_LOCKD=m > CONFIG_SMB_FS=m > # CONFIG_SMB_NLS_DEFAULT is not set > CONFIG_NCP_FS=m > # CONFIG_NCPFS_PACKET_SIGNING is not set > # CONFIG_NCPFS_IOCTL_LOCKING is not set > # CONFIG_NCPFS_STRONG is not set > # CONFIG_NCPFS_NFS_NS is not set > # CONFIG_NCPFS_OS2_NS is not set > # CONFIG_NCPFS_SMALLDOS is not set > # CONFIG_NCPFS_NLS is not set > # CONFIG_NCPFS_EXTRAS is not set > # CONFIG_ZISOFS_FS is not set > # CONFIG_ZLIB_FS_INFLATE is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > CONFIG_SMB_NLS=y > CONFIG_NLS=y > > # > # Native Language Support > # > CONFIG_NLS_DEFAULT="iso8859-1" > # CONFIG_NLS_CODEPAGE_437 is not set > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ISO8859_1 is not set > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > > # > # Sound > # > CONFIG_SOUND=m > # CONFIG_SOUND_BT878 is not set > # CONFIG_SOUND_CMPCI is not set > # CONFIG_SOUND_EMU10K1 is not set > # CONFIG_SOUND_FUSION is not set > # CONFIG_SOUND_CS4281 is not set > # CONFIG_SOUND_ES1370 is not set > # CONFIG_SOUND_ES1371 is not set > # CONFIG_SOUND_ESSSOLO1 is not set > # CONFIG_SOUND_MAESTRO is not set > # CONFIG_SOUND_MAESTRO3 is not set > # CONFIG_SOUND_ICH is not set > # CONFIG_SOUND_RME96XX is not set > # CONFIG_SOUND_SONICVIBES is not set > # CONFIG_SOUND_TRIDENT is not set > # CONFIG_SOUND_MSNDCLAS is not set > # CONFIG_SOUND_MSNDPIN is not set > # CONFIG_SOUND_VIA82CXXX is not set > # CONFIG_SOUND_OSS is not set > > # > # USB support > # > # CONFIG_USB is not set > > # > # USB Controllers > # > > # > # USB Device Class drivers > # > > # > # USB Human Interface Devices (HID) > # > > # > # Input core support is needed for USB HID > # > > # > # USB Imaging devices > # > > # > # USB Multimedia devices > # > > # > # Video4Linux support is needed for USB Multimedia device support > # > > # > # USB Network adaptors > # > > # > # USB port drivers > # > > # > # USB Serial Converter support > # > > # > # USB Miscellaneous drivers > # > > # > # Bluetooth support > # > # CONFIG_BLUEZ is not set > > # > # Kernel hacking > # > # CONFIG_DEBUG_KER > > > Did you ever try the old fashioned way? cd /usr/src/linux-x.x.x make menuconfig make dep && make clean bzImage modules modules_install mv /boot/kernelimage /boot/kernelimage.orig cp /usr/src/linux-x.x.x/arch/i386/boot/bzImage /boot Prost, Klaus -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
