On Mon, May 31, 2004 at 10:40:57PM -0400, Jerome R. Acks wrote: > On Thu, May 27, 2004 at 12:29:15PM -0400, Ishwar Rattan wrote: > > > > I am running kernel 2.6.5. I removed the ide-scsi line from > > /etc/modules but it is loaded all the same. Looks like a fresh > > /etc/modules is generated at every boot! Is there a way to > > force it to load only the modules that I want? >
Is it possible that you are using the cd through scsi emulation (common for burners), there was some point were it started requiring ide-scsi on me. /etc/modules is generated using the files in /etc/modutils.d. You will need to find the line you want in there, change it and run update-modules. Another option is if you are using usb-storage, I think it also needs ide-scsi > Check if there is an alias that would cause the module to load in > /lib/modules/modprobe.conf. If so, you should be able to remove the > alias from one of the files in /etc/modprobe.d and then rebuild the > modprobe.conf by running update-modules. > > Another thought: If the module is being loaded by hotplug, you should be > able to prevent it from loading by adding ide-scsi to > /etc/hotplug/blacklist. > > -- > Jerome -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
