--- Adamo <[EMAIL PROTECTED]> wrote: > Hi i had windows on this box before and the speed > was above 3000Kbs i > installed debian and now its a slow 417kbs. > im running sarge with kernel 2.6.8 on a 800Mhz > 512ram machine and > minimal amount of services, there is plenty of cpu > left so thats not > the problem. > its a asus av7 motherboard and the netcard is a > Realtek Semiconductor > Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) card. > my switch is 100Mbits. > Ok got any ideas? > Im desperate! > heres som output > > Output fra mii-tool: > eth0: negotiated 100baseTx-FD, link ok > product info: vendor 00:00:00, model 0 rev 0 > basic mode: autonegotiation enabled > basic status: autonegotiation complete, link ok > capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD > 10baseT-HD > advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD > 10baseT-HD > link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD > 10baseT-HD flow-control > > output from ifconfig: > eth0 Link encap:Ethernet HWaddr > 00:C0:26:78:14:A1 > inet addr:192.168.0.100 > Bcast:192.168.0.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 > Metric:1 > RX packets:599881 errors:0 dropped:0 > overruns:0 frame:0 > TX packets:795532 errors:0 dropped:0 > overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:173192384 (165.1 MiB) TX > bytes:842761893 (803.7 MiB) > Interrupt:3 Base address:0x7000 > > > -- > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > >
It runs slow when? When transferring files between two local machines? Using what protocol, ftp, http, smb, nfs, other? How are you measuring the throughput? How did you measure it when you ran windows? There are far more variables at play here than you may think. ~Zaq -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
