What version of samba are you using ??? there is a problem with samba - slow performance. try to use newer version of samba package. or if you are already using the latest version of samba, verify smb.conf file to adjust for better performance - try to adjust the socket options parameter.
Marcos On Thu, 2004-09-30 at 02:59, Adamo wrote: > ive checked and the windows part i ok > > > On Wed, 29 Sep 2004 14:37:31 -0400, Paul Tsai <[EMAIL PROTECTED]> wrote: > > Jacob S wrote: > > > > >On Wed, 29 Sep 2004 13:56:40 -0400 > > > > > > >Paul Tsai <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > >>Zachary Rizer wrote: > > >> > > >> > > >> > > >>>--- Adamo <[EMAIL PROTECTED]> wrote: > > >>> > > >>> > > >>> > > >>>>oh sorry. i tryed tranfering over samba and SCP same > > >>>>slow speed. on > > >>>>the windows machine i used normal windows networking > > >>>>SMB protocol. > > >>>>The transfer is between to local machines one > > >>>>windows the other debian. > > >>>> > > >>>>On Wed, 29 Sep 2004 09:56:28 -0700 (PDT), Zachary > > >>>>Rizer > > >>>><[EMAIL PROTECTED]> wrote: > > >>>> > > >>>> > > >>>1) Try not to top-post. > > >>>2) "Hi i had windows on this box before and the speed > > >>>was above 3000Kbs i installed debian and now its a > > >>>slow 417kbs." Take your 30000Kbs, divide it by 8, you > > >>>get 375KB/s. Hint: 8bits = 1byte. Debian is > > >>>reporting the kiloBYTES per second (~417, as you > > >>>reported), windows was reporting kiloBITS per second. > > >>> > > >>> > > >>> > > >>it looks like you are running your network half-duplexed though. Use > > >>full, you should get increases. > > >> > > >> > > > > > >Actually, re-read the output he posted from mii-tool, pasted below for > > >convenience. It indicates he is in fact running 100Mbps full duplex > > >already. > > > > > > > > > > > >>Output fra mii-tool: > > >>eth0: negotiated 100baseTx-FD, link ok > > >> > > >> > > > ^^^^^^^^^^^^^^^^^^^^^^^ > > > > > > > > >>product info: vendor 00:00:00, model 0 rev 0 > > >>basic mode: autonegotiation enabled > > >>basic status: autonegotiation complete, link ok > > >>capabilities: 100baseTx-FD 100baseTx-HD > > >> > > >> > > > > > >Jacob > > > > > > > > > > > > > > Ah, Touche! > > I did see that full duplex line, however, if all he is doing is > > transfering data, he should be get approximately twice that on a full > > duplex network. it looks as if part of his network isn't on full. I > > could be wrong but it was just a suggestion (based on the performance). > > Double check your windows drivers and make sure it's on in full. > > > > > > Paul > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]