Problem: The system hangs when the SCSI bus is reset.
Config: Adaptec 1522 SCSI controller
Two different motherboards
Three different versions of Linux
More specifically, I cannot perform a soft reboot from Linux. If, for
example, I run 'shutdown -r now' the system will shut down normally,
but will hang during the boot phase just after it recognizes the SCSI
controller.
I can reboot DOS to DOS, but if I am running DOS and reboot to Linux
the system hangs in the same place.
Shutting off power and then rebooting clears the problem.
Any clues or comments?
Chris -)-----
--
Christopher R. Hertel -)----- University of Minnesota
[EMAIL PROTECTED] Networking and Telecommunications Services
