Hi there,
I've got a problem setting up routing for two linux boxes connected to the Internet. The setup used to be like this: ISP My systems lisa.thenet.ch icemark.thenet.ch firefranc ppp0 193.135.252.75 193.135.252.47 eth0 192.168.101.1 192.168.101.2 My systems are connected to each other using a fast ethernet link (3com 3c905TX cards), one of the two systems (icemark) is connected to the Internet via a ppp link. In that setup, firefranc can't access the Internet itself, but only by using proxy services on icemark. The new setup should look like: ISP My systems lisa.thenet.ch icemark.thenet.ch firefranc.thenet.ch <--- ppp0 ---> <--- eth0 ---> 193.135.252.75 193.135.252.47 193.135.252.179 The firefranc should get a full link onto the Internet, but how do I have to set up the routing to make this work? I tried binding both ppp0 & eth0 on icemark to the same IP address and setting icemark's default route to lisa and setting a host route to firefranc. firefranc got a default route to icemark. The result is, that firefranc can access icemark and vice versa, and icemark can access the Internet and vice versa. But I can't get firefranc to get through to the Internet (also giving icemark as the gateway for firefranc's default route didn't help). I am not too knowledgable in IP routing, so I guess the mistake a made is probably pretty stupid - nevertheless, I'd like to know what's wrong and how to fix it... Any ideas? Benedikt signoff --- Benedikt Eric Heinen - Muehlemattstrasse 53 - CH3007 Bern - SWITZERLAND email: [EMAIL PROTECTED]