On Wed, 22 Oct 1997, Joey Hess wrote: > Dale Scheetz wrote: > > I've been running it for 24 hours now with no problems, other than the map > > file error at boot up. Lately I have been building my kernels without > > module support. I have heard that some of the modules in .31 don't load > > and unload properly at all times. Is it possible this is your problem? > > That is, are you using kerneld? > > Yes, I'm using kerneld. The module that loads and uploads the most here (the > only one that's likely to do so in the night when I'm gone) is the sound > module. My error message I once saw was this: "kite kernel: kernel panic: > skput:over: 0014348c:4008". I dunno what it means. Also, the kernel often > crashes within 2 minutes of bootup. It seems unlikely that a module would be > unloading then. > That is exactly when they start unloading! I once had a pppd problem because I loaded serial as a module. At bootup it would use setserial to set the proper interupt for the modem. If I started pppd within 2 minutes of bootup everthing worked fine. If I tried to start pppd after 2 minutes it would fail because, although serial got reloaded, it had the wrong, default, interupt values and wouldn't work.
Luck, Dwarf -- _-_-_-_-_-_- _-_-_-_-_-_-_- aka Dale Scheetz Phone: 1 (904) 656-9769 Flexible Software 11000 McCrackin Road e-mail: [EMAIL PROTECTED] Tallahassee, FL 32308 _-_-_-_-_-_- If you don't see what you want, just ask _-_-_-_-_-_-_- -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .