Martin Bialasinski wrote: > > However I tried to built the telesmodul in the kernel but the system > > refuses to load it with irq 15, and I don't know how to change the > > irq.(command line doesn't worked either. Under Win95 the setting is > okay > > with irq 2.) I have downloaded the HiSax doku, but still wonder how > it > > works. I miss the "hisax.o" on my system, but where can I get it? > > (Isdn4kutils installed)
> Aah, so you have a kernelsource but didn't select Hisax and the Hisax > telesmodule. Just do this. Hi Matin, Thanks for reply. Well, I would do it instantely, just I don't know how. On my system I don't find the Hisax modul. So how can I select it? With modconf there is no Hisax selection possible (no hisax.o under modules/ or elsewhere). So I tried to built the "hisax.o" out of the "dummy.o" to get Hisax available, but it doesn't worked out. Then there is a selection possible (Hisax for siemens chips etc) but seems wrong (probalby because its bascially a dummy and not the original hisax.o which I can't find. > Then: add "hisax" to /etc/modules How? That's the crucial point. :) > and edit /etc/conf.modules. Insert a line > like: options hisax type=15 protocol=2 io=0x100 irq=10 Like you suggested I add the parameters for the card (I watched the hisaxdoku) there and tried, and tried... > Consider README.HiSax in the kernelsource to find out about the > appropriate > settings for your card. > > You could also check the newsgroup de.alt.comm.isdn4linux for help. > Read > before posting, please. Okay. I checked them. Some relevant postings, but basically I don't know how to built up the Hisax modul. If I would be able to select them with modconf it would be great. Hiowever Isdn4utils is correct installed I guess, anything else to consider? I'm running in cirlces, sot to say... Any further idea? Thanks a lot. The system is Debian 1.3.1. I have installed the Isdn4utils with dselect and allseems to go right. No problems occured. regards, Volker -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .