> > Status: cannot open '/dev/lp1' - 'Device not configured', attempt 1, > > You need to edit /etc/printcap and change lp1 to lp0. Not sure why this > is setup this way, do you have more than one parallel device?
Hmm. I look at my printcap, and by default it's set to lp1. I shall include it for educational purproses :) # /etc/printcap: printer capability database. See printcap(5). # You can use the filter entries df, tf, cf, gf etc. for # your own filters. See the printcap(5) manual page for further # details. lp|Generic dot-matrix printer entry :lp=/dev/lp1 :sd=/var/spool/lpd/lp :af=/var/log/lp-acct :lf=/var/log/lp-errs :pl#66 :pw#80 :pc#150 :mx#0 :sh I haven't configured the printer on my machine yet, but I rather question the lp1 default... --- The chief cause of problems is solutions. -- Eric Sevareid [EMAIL PROTECTED]