Thanks for all of the help! I ended up removing the ne module and replaceing it with the io=0x300 irq=3 specified in the options.
I can now telnet to my system, so I think its fixed! I will check it out the rest of the way in the morning, Doug THANK YOU! Doug Jim wrote: > The easiest way for us to fix this would be by running modconf. Hopefully > nothing else is broken (which we'll find out soon). > > As root, run: > modconf > > Then go to "net" and then "ne" and enable the module for your card. The > reason you aren't detecting the card? modprobe will generally only detect > PCI cards, unless you tell it the address to search. In your case, your > card's address is 0x300 and you will need to specify this as one of the > options in modconf. You will need to use: > > io=0x300 > > as a command-line option for the module. > > That will probably take care of everything. If not, let us know what > troubles you run into and we'll go from there. :) > > On Sat, 17 Jul 1999, Doug Thistlethwaite wrote: > > > Thanks for the reply. > > > > I am not sure if I was using module or kernel for the network card. I have > > had > > this system for awhile (potato is the third debian distrubution I have > > used, and > > the network settings were setup at the very beginning. How would I tell? > > The > > current kernel version seems to be 2.0.36 > > > > The /etc/init.d/network files is the same as it was before the upgrade, > > what > > should I be looking for? For me to post it, I would have to type it in on > > this > > windoze machine. > > > > Doug > > > > Mark Wagnon wrote: > > > > > On 07/17/99 10:48 PM, Doug Thistlethwaite wrote: > > > > Hello, I hope someone can help me with this. It seems like it should > > > > not to hard to fix, but without any knowledge of how or where the > > > > network services are started / initialized, I don't think I will figure > > > > it out without help. > > > > > > > > > > Hmm. I;m not how much assistance I'm going to be but here goes. Do you > > > have > > > support for you NIC either compiled into your kernel or as modules? > > > > > > What does your /etc/init.d/network file look like? This file is where you > > > set > > > up your network devices. > > > > > > I hope this gets this thread started, because I'veonly had my computers > > > networked for a couple weeks and I'm still figuring things out. > > > > > > late > > > -- > > > __ _ > > > Mark Wagnon Debian GNU/ -o) / / (_)__ __ ____ __ > > > Chula Vista, CA /\\/ /__/ / _ \/ // /\ \/ / > > > [EMAIL PROTECTED] _\_v____/_/_//_/\_,_/ /_/\_\ > > > http://www.debian.org > > > > > > -- > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
