Waldemar, Thanks for your reply.
Waldemar Brodkorb <[EMAIL PROTECTED]> writes: > Hello Johann, > > * Johann wrote: > > > I get the error in the subject line when I try to run mp3blaster on a > > mp3-file. I have tried xmms, alsaplayer and freeamp and they also > > fail. > > > > I can play CD's without a problem. How can I find out what the > > problem is and how to solve it? > > Your soundcard is not configured. If this is true, I don't understand why I get good quality sound using gcd and gmix. CS4232 or maybe CS4236 > What soundcard you use and which driver you try? > (ALSA or OSS) I tried the kernel's sound module CONFIG_SOUND_CS4232=m And then also Alsa. The default Alsa configuration did not change anything. I had it working before, but after replacing my motherboard it stopped working. > lspci -v lspci -v 00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev 44) Subsystem: Giga-byte Technology: Unknown device 0691 Flags: bus master, medium devsel, latency 16 Memory at d8000000 (32-bit, prefetchable) Capabilities: <available only to root> 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Capabilities: <available only to root> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Apollo PRO] (rev 23) Subsystem: Giga-byte Technology: Unknown device 0596 Flags: bus master, stepping, medium devsel, latency 0 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master SecP PriP]) Flags: bus master, medium devsel, latency 64 I/O ports at e000 Capabilities: <available only to root> 00:07.3 Host bridge: VIA Technologies, Inc.: Unknown device 3050 (rev 30) Flags: medium devsel 00:09.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (prog-if 00 [VGA]) Flags: medium devsel, IRQ 11 Memory at dd000000 (32-bit, non-prefetchable) > cat /proc/interrupts CPU0 0: 3844909 XT-PIC timer 1: 30343 XT-PIC keyboard 2: 0 XT-PIC cascade 9: 0 XT-PIC Crystal audio controller 12: 494169 XT-PIC PS/2 Mouse 13: 1 XT-PIC fpu 14: 304868 XT-PIC ide0 15: 1095601 XT-PIC ide1 NMI: 0 ERR: 0 > cat /proc/dma 0: Crystal audio controller 3: Crystal audio controller 4: cascade > lsmod Module Size Used by ppp_deflate 39392 0 (autoclean) bsd_comp 3880 0 (autoclean) loop 7712 8 (autoclean) parport_probe 3320 0 lp 4568 0 cs4232 2640 2 ad1848 15984 2 [cs4232] uart401 6160 2 [cs4232] serial 19028 1 sound 58144 0 [cs4232 ad1848 uart401] parport_pc 7320 2 nls_iso8859-1 2368 0 (unused) nls_cp437 3872 5 vfat 9084 1 fat 29760 1 [vfat] I suppose I have to change the DMA- and IRQ-setting, but to what? How do I determine that? Johann -- J.H. Spies - Tel. 082 782 0336. Posbus 4668, Tygervallei 7536 "Study to show thyself approved unto God, a workman who does not need to be ashamed and who correctly handles the word of truth." II Timothy 2:15