Michael, This should have gone to you cc to list
Ian > -----Original Message----- > From: Chun Kit Edwin Lau [mailto:[EMAIL PROTECTED] > Sent: Friday, August 10, 2001 3:49 PM > To: Ian Perry > Subject: Re: dselect and hda:irq timeout > > > Hi, > > Long time ago, I have the same problem, and I fixed it > by disable the dma mode. Don't really know what's going on? > > Edwin Lau > > On Fri, Aug 10, 2001 at 02:29:48PM +1000, Ian Perry wrote: > > > From: Michael Mueller [mailto:[EMAIL PROTECTED] > > > Sent: Friday, August 10, 2001 2:36 PM > > > > > > While dselect is installing, I get intermittent errors. The > > > dselect process > > > continues to completion and I seem to be able to use what has been > > > installed. > > > > > > The error messages are as follows: > > > > > > hda: irq timeout: status = 0x0d { Busy } > > > ide0: reset: success > > > > > > Any ideas on why these messages appear? > > > > > > I've been experimenting with loading 2.2.r3. THis is a brand > > > new machine: > > > Duron 700Mhz, 128Mb DRAM, 10Gb HDD, 50x CDROM, AMD > approved Biostar > > > Mainboard. > > > > > > TIA, > > > Mike > > > > I had a similar message while loading from CD. I had > configured the machine > > with the HD as primary master, and the CD as primary slave. > The fix was to > > put the CD onto the secondary slave. > > > > Ian > > > > > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > -- > Edwin ERTW Lau > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com >
