Hello I am trying to get quake3 working with my sound card. As it is now, my soundcard kinda works. I can play mp3's if they are recorded at 44KHz and I can also play some games with sound (eg. heroes3). When I play games or mp3's which are not recorded at 44KHz, the sound will play real fast and sound like Alvin and the Chipmunks.
The quake readme says that it requires a /dev/dsp device and a OSS compatible sound card. I have some OSS sound options in my kernel, and I do have a /dev/dsp device. If its not possible to get quake3 to work with sound "card", I would at least like to configure the sound so that it can play mp3's which are not recorded at 44 KHz. If I have the sound modules loaded (shown below) when i start quake, quake will display a message about sound being muted and then crash when I start and a single player match. If I don't load the sound modules below, quake will not display any sound info when starting and I can play single player matches - but without sound. Is this the expected behavior or have I misconfigured something? Below is my environmet and settings. Environment: Pentium III Linux 2.4.7 kernel Debian Unstable - latest update MSI motherboard with i810 built-in sound chipset lsmod shows: Module Size Used by i810_audio 13520 0 mpu401 18832 0 (unused) sound 56096 0 [mpu401] soundcore 4080 4 [i810_audio sound] ac97_codec 8608 0 [i810_audio] lspci -v shows (snipped to show only multimedia entry) 00:1f.5 Multimedia audio controller: Intel Corporation: Unknown device 2445 (rev 02) Subsystem: Micro-star International Co Ltd: Unknown device 3370 Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at bc00 [size=256] I/O ports at c000 [size=64] cat /proc/pci shows (snipped to show only multimedia entry) Bus 0, device 31, function 5: Multimedia audio controller: Intel Corporation 82801BA(M) AC'97 Audio (rev 2). IRQ 11. I/O at 0xbc00 [0xbcff]. I/O at 0xc000 [0xc03f]. When I built my kernel, I included as modules these options: <M> Ensoniq AudioPCI (ES1370) <M> Creative Ensoniq AudioPCI 97 (ES1371) <M> OSS sound modules <M> Ensoniq SoundScape support <M> 100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support It doesn't appear that the Ensoniq or soundblaster modules are loading. I don't know if I should use them or not. Also, lspci and cat /proc/pci gives different titles for the sound chipset (the irq and ioport settings are the same though). I don't know if I have the correct modules for this device. I read that I am supposed to use the ES1371 driver. John