On Fri, 17 May 2002, Alvin Oga wrote:
> hi ya karoly...
hi & thx for the help,
> did you try "raidsetfaulty" ?
> raidsetfaulty /dev/md0 /dev/hda1
> raidhotremove /dev/md0 /dev/hda1
~ # raidsetfaulty /dev/md1 /dev/hda1
~ # raidhotremove /dev/md1 /dev/hda1
/dev/md1: can not hot-remove disk: disk not in array!
~ #
> what does your lilo.conf look like ??
at the moment i have boot=/dev/hda, that i can boot at least from the
harddrive, but when i booted from floppy (as i wrote from in my other
mail) even then i couldn't raidhotadd /dev/hda1, 'cause it had active
inodes, according to log. how could it have active inodes, when it was set
to failed dik in the raidtab, and i booted from floppy?
~ # cat /etc/lilo.conf
disk = /dev/hda
bios = 0x80
disk = /dev/hdb
bios = 0x81
disk = /dev/sda
bios = 0x82
boot = /dev/hda
change-rules
reset
read-only
menu-scheme = Wg:kw:Wg:Wg
lba32
prompt
timeout = 80
message = /boot/message
default=withoutMTRR
image = /boot/memtest.bin
label = memtest86
image=/boot/2418-charlie
label=withoutMTRR
~ #
the lilo.conf.raid what i would like to use, looks like:
~ # cat /etc/lilo.conf.raid
# lilo.conf.hda - primary ide master
disk=/dev/md1
bios=0x80
sectors=63
heads=255
cylinders=2491
partition=/dev/md3
start=63
map=/boot/map
install=/boot/boot.b
image=/boot/2418-charlie
root=/dev/hda1
boot=/dev/hda
read-only
label=LinuxRaid
~ # lilo -C /etc/lilo.conf.raid
Warning: LBA32 addressing assumed
Device 0x0301: Partition type 0xFD does not seem suitable for a LILO boot
sector
~ #
> - does it have initrd.gz in it ??
> - which kernel is in initrd.gz ??
i do not have initrd.
this is getting somewhat weird:
~ # cat /proc/mounts
/dev/root / ext2 rw 0 0
proc /proc proc rw 0 0
devpts /dev/pts devpts rw 0 0
/dev/sda3 /oradata ext2 rw 0 0
/dev/sda2 /orapps ext2 rw 0 0
/dev/md4 /opt ext2 rw 0 0
/dev/md3 /var ext2 rw 0 0
/dev/md2 /usr ext2 rw 0 0
/dev/md1 /mnt ext2 rw 0 0
~ # mount /dev/md1 /
~ # cat /proc/mounts
/dev/root / ext2 rw 0 0
proc /proc proc rw 0 0
devpts /dev/pts devpts rw 0 0
/dev/sda3 /oradata ext2 rw 0 0
/dev/sda2 /orapps ext2 rw 0 0
/dev/md4 /opt ext2 rw 0 0
/dev/md3 /var ext2 rw 0 0
/dev/md2 /usr ext2 rw 0 0
/dev/md1 /mnt ext2 rw 0 0
/dev/md1 / ext2 rw 0 0
~ # mount /dev/hda1 /
~ # mount /dev/hda2 /
and so on...
~ # mount
/dev/md1 on / type ext2 (rw)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw)
/dev/sda3 on /oradata type ext2 (rw)
/dev/sda2 on /orapps type ext2 (rw)
/dev/md4 on /opt type ext2 (rw)
/dev/md3 on /var type ext2 (rw)
/dev/md2 on /usr type ext2 (rw)
/dev/md1 on /mnt type ext2 (rw)
/dev/md1 on / type ext2 (rw)
/dev/hda1 on / type ext2 (rw)
/dev/hda2 on / type ext2 (rw)
?!?
something like this i haven't seen yet, and just can hope that im not
going to see anymore...
charlie
--
Vegh Karoly
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
