Thanks all. Using yenta_socket made things work. There was a little problem with cardmgr looking for the orinoco drivers in /lib/modules/xxx/pcmcia instead of /lib/modules/xxx/kernel/drivers/net/wireless; this may be related to the problem G. Edwards mentioned. Creating soft links in pcmcia to ../kernel/drivers/wireless/{hermed,orinoco,orinoco_cs}.o worked.
Now I have routing issues but that's solvable. ~mark ----- Original Message ----- From: "Grant Edwards" <[EMAIL PROTECTED]> To: "Jamin W . Collins" <[EMAIL PROTECTED]> Cc: <debian-user@lists.debian.org> Sent: Tuesday, May 14, 2002 6:34 AM Subject: Re: pcmcia orinoco in a desktop, problems > In article <[EMAIL PROTECTED]>, @mailrelay.informatik.tu-muenchen.de:bounce-debian-user=debian-user=sunsyste [EMAIL PROTECTED] Mon May 13 23:10:03 2002 wrote: > > On Mon, 13 May 2002 14:03:32 -0700 > > "Mark Lanett" <[EMAIL PROTECTED]> wrote: > > > >> I've been trying to set up a desktop machine to act as a wireless router > >> and am having trouble getting the wireless card to work. This is an > >> orinoco silver in a Lucent PCMCIA adapter - I chose to go with the name > >> brand to minimize problems. However: > >> > >> Using: kernel-2.4.18-686, kernel-pcmcia-modules-2.4.18-686, > >> wireless-tools 23-2 > >> Card Services fails to start: > >> /lib/modules/2.4.18-686/pcmcia/i82365.o: unresolved symbol > >> isapnp_find_dev_R9991be23 > > You need to load the isa-pnp module. > > The /etc/init.d/pcmcia script is confused, and it's doing an > "insmod" on i82365 instead of a modprobe (which would have > loaded the isa-pnp stuff). I posted the details on why that > happens and what to do about it a couple weeks ago. Look for > the thread "more PCMCIA woes". > > >> [other things fail afterwards] > > > > i82365 is for 2.2.x kernels. You are looking for "yenta_socket" most > > likely. Check for /etc/default/pcmcia. If it exists, change the PCIC > > line to read: > > It's possible that yenta_socket won't work. It didn't work for > me with 2.4.18 and a Ricoh ISA/PCMCIA bridge: I had to use > i82365. > > > PCIC=yenta_socket > > > > and restart pcmcia. If it doesn't exist you may need to directly edit the > > /etc/init.d/pcmcia script to ensure that it loads "yenta_socket" instead > > of "i82365". > > Didn't work for me... > > -- > Grant Edwards > [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]