Hi
I installed a USB optical mouse on my computer. After going through the
whole process as described in www.linux-usb.com the mouse worked but
only moving up and down when I move the mouse side to side. Neither the
buttons nor the up and down movement had any effect. lsmod gives:
Module Size Used by Not tainted
mousedev 3808 1
hid 12544 0 (unused)
usbmouse 1792 0 (unused)
input 3264 0 [mousedev hid usbmouse]
usb-ohci 17696 0 (unused)
tulip_cb 31872 2
cb_enabler 2528 2 [tulip_cb]
ds 6688 2 [cb_enabler]
i82365 22288 2
pcmcia_core 41408 0 [cb_enabler ds i82365]
smbfs 30496 0 (unused)
sound 53260 0 (unused)
trident 26624 2
soundcore 3492 4 [sound trident]
ac97_codec 9568 0 [trident]
vfat 9276 2
fat 29112 0 [vfat]
and /etc/init.d/hotplug status
USB Status for kernel: Linux 2.4.17 i686
USB up; bus count is 1
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=d48a1000
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
P: Vendor=0458 ProdID=001a Rev= 1.00
S: Manufacturer=KYE
S: Product=WebScroll Eye
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse
USB Drivers Loaded:
usbdevfs
hub
usb_mouse
hid
khubd/hotplug thread:
F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD
040 S 0 8 1 0 69 0 - 0 usb_hu ? 00:00:00khubd
Any suggestions ???
TNX
Riaan
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
