Hello,
I run Linux with a 2.6.13 kernel without udev but with hotplug
(with almost evething compiled as modules). I have noticed that
just modprobing e100 (the module corresponding to my network card)
partially configure the network. To understand what happens I proceed
the following exporiment:
Booting with init=/bin/bash parameter (to be sure that no script
whatsoever is executed)
mount -o remount rw /
mount /proc
modprobe e100
then I see with ifconfig that my internet address has been already
assigned to eth0 and moreover route -n give something like
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
164.15.131.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 164.15.131.254 0.0.0.0 UG 1 0 0 eth0
Anyone has an explanation of this? I thought that the nework had to be
configured
by scripts? I am completely puzzled because apparently the kernel known by
itself
some configuration files. I do not really understand how a network is
configured with
Linux.
The main reason I came to this problem is that I have written a script that change some
configuration files according to a profile=... given on the kernel command line. That let
me use my laptop on different nework without having to change the configuration
files each
time.
Olive
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
