> Hi, I am no expert on Debian and X. But I did have similar problem when I
> was trying to use X on Debian. In my case , the problem with this error
> message were related to the wrong chose of VGA driver type and also wrong
> VedioRam setting.
>
>
> >
> > i have i810 board and Debian 3.0, but X does not work,
> > below is output by xinit:
> >
> > warning: process set to nice value 0 instead of -10 as
> > requested
> >
> > This is a pre-release version of XFree86, and is not
> > supported in any
> > way. Bugs may be reported to [EMAIL PROTECTED] and
> > patches submitted
> > to [EMAIL PROTECTED] Before reporting bugs in
> > pre-release versions,
> > please check the latest version in the XFree86 CVS
> > repository
> > (http://www.XFree86.Org/cvs)
> >
> > XFree86 Version 4.1.0.1 / X Window System
> > (protocol Version 11, revision 0, vendor release 6510)
> > Release Date: 21 December 2001
> > If the server is older than 6-12 months, or if your
> > card is
> > newer than the above date, look for a newer version
> > before
> > reporting problems. (See http://www.XFree86.Org/FAQ)
> > Build Operating System: Linux 2.4.17 i686 [ELF]
> > Module Loader present
> > (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul
> > 22 02:41:45 2003
> > (==) Using config file: "/etc/X11/XF86Config-4"
> > Markers: (--) probed, (**) from config file, (==)
> > default setting,
> > (++) from command line, (!!) notice, (II)
> > informational,
> > (WW) warning, (EE) error, (NI) not
> > implemented, (??) unknown.
> > (==) ServerLayout "Default Layout"
> > (**) |-->Screen "Default Screen" (0)
> > (**) | |-->Monitor "Generic Monitor"
> > (**) | |-->Device "Generic Video Card"
> > (**) |-->Input Device "Generic Keyboard"
> > (**) XKB: rules: "xfree86"
> > (**) XKB: model: "pc104"
> > (**) XKB: layout: "us"
> > (**) |-->Input Device "Configured Mouse"
> > (**) |-->Input Device "Generic Mouse"
> > (WW) The directory "/usr/lib/X11/fonts/cyrillic" does
> > not exist.
> > Entry deleted from font path.
> > (WW) The directory "/usr/lib/X11/fonts/100dpi/" does
> > not exist.
> > Entry deleted from font path.
> > (WW) The directory "/usr/lib/X11/fonts/75dpi/" does
> > not exist.
> > Entry deleted from font path.
> > (WW) The directory "/usr/lib/X11/fonts/Type1" does not
> > exist.
> > Entry deleted from font path.
> > (WW) The directory "/usr/lib/X11/fonts/Speedo" does
> > not exist.
> > Entry deleted from font path.
> > (WW) The directory "/usr/lib/X11/fonts/100dpi" does
> > not exist.
> > Entry deleted from font path.
> > (WW) The directory "/usr/lib/X11/fonts/75dpi" does not
> > exist.
> > Entry deleted from font path.
> > (**) FontPath set to
> > "unix/:7100,/usr/lib/X11/fonts/misc"
> > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> > (==) ModulePath set to "/usr/X11R6/lib/modules"
> > (--) using VT number 7
> >
> > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> > (II) Module bitmap: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> > (II) Module pcidata: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 0.1.0
> > (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> > (II) Module scanpci: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 0.1.0
> > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> > (--) PCI:*(0:1:0) Intel i810 rev 3, Mem @
> > 0xd0000000/26, 0xd6000000/19
> > (II) Loading
> > /usr/X11R6/lib/modules/extensions/libGLcore.a
> > (II) Module GLcore: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading
> > /usr/X11R6/lib/modules/extensions/libdbe.a
> > (II) Module dbe: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/libddc.a
> > (II) Module ddc: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading
> > /usr/X11R6/lib/modules/extensions/libdri.a
> > (II) Module dri: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> > (II) Module drm: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading
> > /usr/X11R6/lib/modules/extensions/libextmod.a
> > (II) Module extmod: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading
> > /usr/X11R6/lib/modules/fonts/libfreetype.a
> > (II) Module freetype: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.1.9
> > (II) Loading
> > /usr/X11R6/lib/modules/extensions/libglx.a
> > (II) Module glx: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> > (II) Module int10: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading
> > /usr/X11R6/lib/modules/extensions/libpex5.a
> > (II) Module pex5: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading
> > /usr/X11R6/lib/modules/extensions/librecord.a
> > (II) Module record: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.13.0
> > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> > (II) Module speedo: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> > (II) Module type1: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/libvbe.a
> > (II) Module vbe: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading
> > /usr/X11R6/lib/modules/extensions/libxie.a
> > (II) Module xie: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
> > (II) Module i810: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> > (II) Module mouse: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) I810: Driver for Intel i810 chipset: i810,
> > i810-dc100, i810e, i815
> > (--) Assigning device section with no busID to primary
> > device
> > (--) Chipset i810 found
> > (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> > (II) Module vgahw: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 0.1.0
> > (**) I810(0): Depth 16, (--) framebuffer bpp 16
> > (==) I810(0): RGB weight 565
> > (==) I810(0): Default visual is TrueColor
> > (II) I810(0): initializing int10
> > (II) I810(0): Primary V_BIOS segment is: 0xc000
> > (II) I810(0): VESA BIOS detected
> > (II) I810(0): VESA VBE DDC supported
> > (II) I810(0): Manufacturer: SAM Model: 1035 Serial#:
> > 1146106165
> > (II) I810(0): Year: 2000 Week: 12
> > (II) I810(0): EDID Version: 1.1
> > (II) I810(0): Analog Display Input, Input Voltage
> > Level: 0.700/0.700 V
> > (II) I810(0): Sync: Separate
> > (II) I810(0): Max H-Image Size [cm]: horiz.: 28
> > vert.: 21
> > (II) I810(0): Gamma: 2.12
> > (II) I810(0): DPMS capabilities: StandBy Suspend Off;
> > RGB/Color Display
> > (II) I810(0): redX: 0.632 redY: 0.335 greenX: 0.295
> > greenY: 0.593
> > (II) I810(0): blueX: 0.143 blueY: 0.066 whiteX:
> > 0.283 whiteY: 0.298
> > (II) I810(0): Supported VESA Video Modes:
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED] (interlaced)
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): [EMAIL PROTECTED]
> > (II) I810(0): Manufacturer's mask: 0
> > (II) I810(0): Supported Future Video Modes:
> > (II) I810(0): #0: hsize: 640 vsize 480 refresh: 85
> > vid: 22833
> > (II) I810(0): #1: hsize: 800 vsize 600 refresh: 85
> > vid: 22853
> > (II) I810(0): #2: hsize: 1024 vsize 768 refresh: 75
> > vid: 20321
> > (II) I810(0): Supported additional Video Mode:
> > (II) I810(0): clock: 36.0 MHz Image Size: 267 x 200
> > mm
> > (II) I810(0): h_active: 640 h_sync: 696 h_sync_end
> > 752 h_blank_end 832 h_border: 0
> > (II) I810(0): v_active: 480 v_sync: 481 v_sync_end
> > 484 v_blanking: 509 v_border: 0
> > (II) I810(0): Supported additional Video Mode:
> > (II) I810(0): clock: 56.2 MHz Image Size: 267 x 200
> > mm
> > (II) I810(0): h_active: 800 h_sync: 832 h_sync_end
> > 896 h_blank_end 1048 h_border: 0
> > (II) I810(0): v_active: 600 v_sync: 601 v_sync_end
> > 604 v_blanking: 631 v_border: 0
> > (II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min:
> > 30 H max: 61 kHz, PixClock max 80 MHz
> > (II) I810(0): Serial No: HVCN322176
> > (--) I810(0): Chipset: "i810"
> > (--) I810(0): Linear framebuffer at 0xD0000000
> > (--) I810(0): IO registers at addr 0xD6000000
> > (EE) Unable to open /dev/agpgart (No such device)
> > (**) I810(0): Will alloc AGP framebuffer: 8192 kByte
> > (==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
> > (II) I810(0): Generic Monitor: Using hsync value of
> > 46.88 kHz
> > (II) I810(0): Generic Monitor: Using vrefresh value of
> > 75.00 Hz
> > (II) I810(0): Clock range: 12.00 to 163.00 MHz
> > (II) I810(0): Not using default mode "640x350" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "640x400" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "720x400" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "640x480" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "640x480" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "640x480" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "640x480" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "800x600" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "800x600" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "800x600" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "800x600" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "1024x768"
> > (unknown reason)
> > (II) I810(0): Not using default mode "1024x768" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "1024x768" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "1024x768" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "1024x768" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "1152x864" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "1280x960" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "1280x960" (hsync
> > out of range)
> > (II) I810(0): Not using default mode "1280x1024"
> > (hsync out of range)
> > (II) I810(0): Not using default mode "1280x1024"
> > (hsync out of range)
> > (II) I810(0): Not using default mode "1280x1024"
> > (hsync out of range)
> > (II) I810(0): Not using default mode "1600x1200"
> > (hsync out of range)
> > (II) I810(0): Not using default mode "1600x1200" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1600x1200" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1600x1200" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1600x1200" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1792x1344" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1792x1344" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1856x1392" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1856x1392" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1920x1440" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1920x1440" (bad
> > mode clock/interlace/doublescan)
> > (II) I810(0): Not using default mode "1400x1050"
> > (hsync out of range)
> > (II) I810(0): Not using default mode "1400x1050"
> > (hsync out of range)
> > (II) I810(0): Not using mode "640x480" (no mode of
> > this name)
> > (--) I810(0): Virtual size is 800x600 (pitch 1024)
> > (**) I810(0): Default mode "800x600": 49.5 MHz, 46.9
> > kHz, 75.0 Hz
> > (--) I810(0): Display dimensions: (28, 21) cm
> > (--) I810(0): DPI set to (72, 72)
> > (II) Loading /usr/X11R6/lib/modules/libfb.a
> > (II) Module fb: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/libxaa.a
> > (II) Module xaa: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > (II) Loading /usr/X11R6/lib/modules/libramdac.a
> > (II) Module ramdac: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 0.1.0
> > modprobe: Can't locate module i810
> > [drm] failed to load kernel module "i810"
> > (II) I810(0): [drm] drmOpen failed
> > (EE) I810(0): [dri] DRIScreenInit failed. Disabling
> > DRI.
> > (==) I810(0): Write-combining range
> > (0xd0000000,0x4000000)
> > (II) I810(0): Setting dot clock to 49.5 MHz [ 0x1f 0x6
> > 0x30 ] [ 33 8 3 ]
> > (II) I810(0): chose watermark 0x22009000: (tab.freq
> > 49.5)
> >
> > Fatal server error:
> > AddScreen/ScreenInit failed for driver 0
> >
> >
> > When reporting a problem related to a server crash,
> > please send
> > the full server output, not just the last messages.
> > This can be found in the log file
> > "/var/log/XFree86.0.log".
> > Please report problems to [EMAIL PROTECTED]
> >
> > X connection to :0.0 broken (explicit kill or server
> > shutdown).
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > The New Yahoo! Search - Faster. Easier. Bingo.
> > http://search.yahoo.com
> >
> >
> > --
> > To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> > with a subject of "unsubscribe". Trouble? Contact
> [EMAIL PROTECTED]
> >
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]