Hi,
You're using version 4.1.0 of X which may not support your hardware properly. My Dell 2350 has the Intel 845GL chipset and when I installed debian I couldn't get X to work either. It turns out that the chipset is only supported by version 4.3.0 of X which can be downloaded and installed from www.xfree86.org. Perhaps the new version my solve your problem also. ... salman On Mon, 21 Jul 2003, J. Smith wrote: > i have i810 board and Debian 3.0, but X does not work, > below is output by xinit: > > warning: process set to nice value 0 instead of -10 as > requested > > This is a pre-release version of XFree86, and is not > supported in any > way. Bugs may be reported to [EMAIL PROTECTED] and > patches submitted > to [EMAIL PROTECTED] Before reporting bugs in > pre-release versions, > please check the latest version in the XFree86 CVS > repository > (http://www.XFree86.Org/cvs) > > XFree86 Version 4.1.0.1 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 21 December 2001 > If the server is older than 6-12 months, or if your > card is > newer than the above date, look for a newer version > before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: Linux 2.4.17 i686 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul > 22 02:41:45 2003 > (==) Using config file: "/etc/X11/XF86Config-4" > Markers: (--) probed, (**) from config file, (==) > default setting, > (++) from command line, (!!) notice, (II) > informational, > (WW) warning, (EE) error, (NI) not > implemented, (??) unknown. > (==) ServerLayout "Default Layout" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "Generic Monitor" > (**) | |-->Device "Generic Video Card" > (**) |-->Input Device "Generic Keyboard" > (**) XKB: rules: "xfree86" > (**) XKB: model: "pc104" > (**) XKB: layout: "us" > (**) |-->Input Device "Configured Mouse" > (**) |-->Input Device "Generic Mouse" > (WW) The directory "/usr/lib/X11/fonts/cyrillic" does > not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/100dpi/" does > not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/75dpi/" does > not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/Type1" does not > exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/Speedo" does > not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/100dpi" does > not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/75dpi" does not > exist. > Entry deleted from font path. > (**) FontPath set to > "unix/:7100,/usr/lib/X11/fonts/misc" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 0.1.0 > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 0.1.0 > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (--) PCI:*(0:1:0) Intel i810 rev 3, Mem @ > 0xd0000000/26, 0xd6000000/19 > (II) Loading > /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading > /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading > /usr/X11R6/lib/modules/extensions/libdri.a > (II) Module dri: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a > (II) Module drm: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading > /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading > /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.1.9 > (II) Loading > /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading > /usr/X11R6/lib/modules/extensions/libpex5.a > (II) Module pex5: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading > /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.13.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading > /usr/X11R6/lib/modules/extensions/libxie.a > (II) Module xie: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o > (II) Module i810: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) I810: Driver for Intel i810 chipset: i810, > i810-dc100, i810e, i815 > (--) Assigning device section with no busID to primary > device > (--) Chipset i810 found > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 0.1.0 > (**) I810(0): Depth 16, (--) framebuffer bpp 16 > (==) I810(0): RGB weight 565 > (==) I810(0): Default visual is TrueColor > (II) I810(0): initializing int10 > (II) I810(0): Primary V_BIOS segment is: 0xc000 > (II) I810(0): VESA BIOS detected > (II) I810(0): VESA VBE DDC supported > (II) I810(0): Manufacturer: SAM Model: 1035 Serial#: > 1146106165 > (II) I810(0): Year: 2000 Week: 12 > (II) I810(0): EDID Version: 1.1 > (II) I810(0): Analog Display Input, Input Voltage > Level: 0.700/0.700 V > (II) I810(0): Sync: Separate > (II) I810(0): Max H-Image Size [cm]: horiz.: 28 > vert.: 21 > (II) I810(0): Gamma: 2.12 > (II) I810(0): DPMS capabilities: StandBy Suspend Off; > RGB/Color Display > (II) I810(0): redX: 0.632 redY: 0.335 greenX: 0.295 > greenY: 0.593 > (II) I810(0): blueX: 0.143 blueY: 0.066 whiteX: > 0.283 whiteY: 0.298 > (II) I810(0): Supported VESA Video Modes: > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] (interlaced) > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): [EMAIL PROTECTED] > (II) I810(0): Manufacturer's mask: 0 > (II) I810(0): Supported Future Video Modes: > (II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 > vid: 22833 > (II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 > vid: 22853 > (II) I810(0): #2: hsize: 1024 vsize 768 refresh: 75 > vid: 20321 > (II) I810(0): Supported additional Video Mode: > (II) I810(0): clock: 36.0 MHz Image Size: 267 x 200 > mm > (II) I810(0): h_active: 640 h_sync: 696 h_sync_end > 752 h_blank_end 832 h_border: 0 > (II) I810(0): v_active: 480 v_sync: 481 v_sync_end > 484 v_blanking: 509 v_border: 0 > (II) I810(0): Supported additional Video Mode: > (II) I810(0): clock: 56.2 MHz Image Size: 267 x 200 > mm > (II) I810(0): h_active: 800 h_sync: 832 h_sync_end > 896 h_blank_end 1048 h_border: 0 > (II) I810(0): v_active: 600 v_sync: 601 v_sync_end > 604 v_blanking: 631 v_border: 0 > (II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min: > 30 H max: 61 kHz, PixClock max 80 MHz > (II) I810(0): Serial No: HVCN322176 > (--) I810(0): Chipset: "i810" > (--) I810(0): Linear framebuffer at 0xD0000000 > (--) I810(0): IO registers at addr 0xD6000000 > (EE) Unable to open /dev/agpgart (No such device) > (**) I810(0): Will alloc AGP framebuffer: 8192 kByte > (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) > (II) I810(0): Generic Monitor: Using hsync value of > 46.88 kHz > (II) I810(0): Generic Monitor: Using vrefresh value of > 75.00 Hz > (II) I810(0): Clock range: 12.00 to 163.00 MHz > (II) I810(0): Not using default mode "640x350" (hsync > out of range) > (II) I810(0): Not using default mode "640x400" (hsync > out of range) > (II) I810(0): Not using default mode "720x400" (hsync > out of range) > (II) I810(0): Not using default mode "640x480" (hsync > out of range) > (II) I810(0): Not using default mode "640x480" (hsync > out of range) > (II) I810(0): Not using default mode "640x480" (hsync > out of range) > (II) I810(0): Not using default mode "640x480" (hsync > out of range) > (II) I810(0): Not using default mode "800x600" (hsync > out of range) > (II) I810(0): Not using default mode "800x600" (hsync > out of range) > (II) I810(0): Not using default mode "800x600" (hsync > out of range) > (II) I810(0): Not using default mode "800x600" (hsync > out of range) > (II) I810(0): Not using default mode "1024x768" > (unknown reason) > (II) I810(0): Not using default mode "1024x768" (hsync > out of range) > (II) I810(0): Not using default mode "1024x768" (hsync > out of range) > (II) I810(0): Not using default mode "1024x768" (hsync > out of range) > (II) I810(0): Not using default mode "1024x768" (hsync > out of range) > (II) I810(0): Not using default mode "1152x864" (hsync > out of range) > (II) I810(0): Not using default mode "1280x960" (hsync > out of range) > (II) I810(0): Not using default mode "1280x960" (hsync > out of range) > (II) I810(0): Not using default mode "1280x1024" > (hsync out of range) > (II) I810(0): Not using default mode "1280x1024" > (hsync out of range) > (II) I810(0): Not using default mode "1280x1024" > (hsync out of range) > (II) I810(0): Not using default mode "1600x1200" > (hsync out of range) > (II) I810(0): Not using default mode "1600x1200" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1600x1200" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1600x1200" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1600x1200" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1792x1344" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1792x1344" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1856x1392" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1856x1392" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1920x1440" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1920x1440" (bad > mode clock/interlace/doublescan) > (II) I810(0): Not using default mode "1400x1050" > (hsync out of range) > (II) I810(0): Not using default mode "1400x1050" > (hsync out of range) > (II) I810(0): Not using mode "640x480" (no mode of > this name) > (--) I810(0): Virtual size is 800x600 (pitch 1024) > (**) I810(0): Default mode "800x600": 49.5 MHz, 46.9 > kHz, 75.0 Hz > (--) I810(0): Display dimensions: (28, 21) cm > (--) I810(0): DPI set to (72, 72) > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.1.0.1, module version = 0.1.0 > modprobe: Can't locate module i810 > [drm] failed to load kernel module "i810" > (II) I810(0): [drm] drmOpen failed > (EE) I810(0): [dri] DRIScreenInit failed. Disabling > DRI. > (==) I810(0): Write-combining range > (0xd0000000,0x4000000) > (II) I810(0): Setting dot clock to 49.5 MHz [ 0x1f 0x6 > 0x30 ] [ 33 8 3 ] > (II) I810(0): chose watermark 0x22009000: (tab.freq > 49.5) > > Fatal server error: > AddScreen/ScreenInit failed for driver 0 > > > When reporting a problem related to a server crash, > please send > the full server output, not just the last messages. > This can be found in the log file > "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > > X connection to :0.0 broken (explicit kill or server > shutdown). > > > > __________________________________ > Do you Yahoo!? > The New Yahoo! Search - Faster. Easier. Bingo. > http://search.yahoo.com > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]