Hello! I want to install Debian Etch on my new box with motherboard that has for the storage the nvidia nForce 430i chipset. This chipset support RAID 1 configuration.
I want to install Etch on two SATA disk with the hardware RAID 1 setup. I setup in the BIOS the RAID 1 for these disks. I have only these two disks (2 x 320 GB) in the box. I want to use the downloaded debian-40r0-i386-CD-1.iso for this installation. Will Etch recognize the RAID 1 BIOS setup during the installation? I find on the internet documentation about hardware RAID [1] but can't find in there description about installing a GNU/Linux system on hw RAID 1 out there. Can I install Etch on this nvidia hardware RAID 1, or perhaps should I to install Etch with software RAID 1 on these two SATA disk? Any advices will be appreciated! [1] http://www.ram.org/computing/linux/dpt_raid.html -- Regards, Paul Csányi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
