Try changing the driver selection in K3B. I think you'll find this at K3b configure> Devices> Cdrdao driver.
Linux the Root to no GPFs > Date: Mon, 6 Oct 2008 16:50:48 +1100 > From: [EMAIL PROTECTED] > To: debian-user@lists.debian.org > Subject: cdrecord - need for troubleshoot help > > Hello Guys, > > I'm trying to erase and burn my cd-rw. I'm sure that there is no > problem with my cd-rw media as it works on my other system. After > unsuccessful attempt to burn it with k3b I have gone to command line > to see what is going on. For command line I have followed steps > described here: > http://www.linuxconfig.org/Create_and_burn_ISO_images_with_mkisofs_%26_cdrecord > > Here is a output, everything looks fine but last 6 lines. Help is much > appreciated. Thank you > > OUTPUT: > > > wodim: No write mode specified. > wodim: Asuming -tao mode. > wodim: Future versions of wodim may have different drive dependent defaults. > TOC Type: 1 = CD-ROM > scsidev: '/dev/hdc' > devname: '/dev/hdc' > scsibus: -2 target: -2 lun: -2 > Linux sg driver version: 3.5.27 > Wodim version: 1.1.2 > SCSI buffer size: 64512 > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : 'COMPAL ' > Identification : 'TSD80Y1 DVD RW ' > Revision : 'D010' > Device seems to be: Generic mmc2 DVD-R/DVD-RW. > Current: 0x000A (CD-RW) > Profile: 0x001B (DVD+R) > Profile: 0x001A (DVD+RW) > Profile: 0x0014 (DVD-RW sequential recording) > Profile: 0x0013 (DVD-RW restricted overwrite) > Profile: 0x0011 (DVD-R sequential recording) > Profile: 0x0010 (DVD-ROM) > Profile: 0x000A (CD-RW) (current) > Profile: 0x0009 (CD-R) > Profile: 0x0008 (CD-ROM) > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC-3 SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > Drive buf size : 1638400 = 1600 KB > Beginning DMA speed test. Set CDR_NODMATEST environment variable if device > communication breaks or freezes immediately after that. > Drive DMA Speed: 4449 kB/s 25x CD 3x DVD > FIFO size : 12582912 = 12288 KB > Track 01: data 556 MB > Total size: 639 MB (63:21.21) = 285091 sectors > Lout start: 639 MB (63:23/16) = 285091 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 2 > Reference speed: 6 > Is not unrestricted > Is erasable > Disk sub type: High speed Rewritable (CAV) media (1) > ATIP start of lead in: -11077 (97:34/23) > ATIP start of lead out: 359849 (79:59/74) > 1T speed low: 4 1T speed high: 10 > 2T speed low: 2 2T speed high: 10 > power mult factor: 2 6 > recommended erase/write power: 5 > A1 values: 24 2C DC > A2 values: 14 A4 4A > A3 values: 04 C4 80 > Disk type: Phase change > Manuf. index: 11 > Manufacturer: Mitsubishi Chemical Corporation > Blocks total: 359849 Blocks current: 359849 Blocks remaining: 74758 > Speed set to 2116 KB/s > Starting to write CD/DVD at speed 12.0 in real TAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... input buffer ready. > Performing OPC... > > > Errno: 0 (Success), send opc scsi sendcmd: no error > CDB: 54 01 00 00 00 00 00 00 00 00 > status: 0x4 (CONDITION MET/GOOD) > cmd finished after 60.053s timeout 60s > wodim: OPC failed. > Writing time: 174.939s > > > > -- > lubo > http://www.linuxconfig.org/ > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > _________________________________________________________________ Win New York holidays with Kellogg’s & Live Search http://clk.atdmt.com/UKM/go/111354033/direct/01/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
