Hi there, Since I was unable to recompile my old kernel 2.6.20 under Debian Sarge, I decided to install Lenny. Unable to find a way to just upgrade (there has been Etch in between), I just saved directories and installed from the iso image
debian-502a-i386-netinst.iso I choose somewhat automated install. I left partitions like they were under Sarge, or, if I did change something at that point, I can't exactly remember what. I must say that the partitioning menu seemed very confusing, but I admit that I knew very little about my raid1 system. In any case, the Lenny install that I now get, shows defaults. mdadm monitoring keeps sending mails at each boot : 'A degradated event has been detected on md device /dev/md0 P.S. The /proc/mdstat file currently contains the following : Personalities: [raid 1] md1: active raid 1 sda2[0] sdb2[1] 67874550 blocks [2/2] [UU] md0: active raid 1 sda1[0] 497856 blocks [2/1] [U_] unused devices : none ' a 'df' does confirms the diagnostic above : if md1 is OK with two mirrored partitions sda2 and sdb2, md0 only has sda1, while there was sda1 and sdb1 on my former Sarge system. Ever since I detected such anomaly, I re-installed once more, but I must have missed something on the partitioning menu, and I have not found what I should change there. Thanks in advance for your help. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org