On 19/10/13 05:44 PM, Gregory Nowak wrote:
On Sat, Oct 19, 2013 at 05:30:41PM -0400, Sureyya Sahin wrote:
Ok, I entered the command as root (not working as a regular user)
and get this edited version (to keep my message short) of
information:
All your edited version tells us is what drive this is. To actually
know what shape the drive is in, we need to see the section that
starts out something like:
"SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:"
Greg
OK, I guess this is the data you are asking for (I trimmed the other
part again to make the message short):
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail
Always - 15
2 Throughput_Performance 0x0027 252 252 000 Pre-fail
Always - 0
3 Spin_Up_Time 0x0023 089 088 025 Pre-fail
Always - 3405
4 Start_Stop_Count 0x0032 095 095 000 Old_age
Always - 5564
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002f 252 252 051 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0025 252 252 015 Pre-fail
Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 11541
10 Spin_Retry_Count 0x0033 252 252 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0032 098 098 000 Old_age
Always - 3020
12 Power_Cycle_Count 0x0032 097 097 000 Old_age
Always - 3833
183 Runtime_Bad_Block 0x0032 252 252 010 Old_age Always
- 0
184 End-to-End_Error 0x0033 252 252 048 Pre-fail Always
- 0
186 Unknown_Attribute 0x0032 252 252 000 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 1
188 Command_Timeout 0x0032 252 252 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0002 063 054 040 Old_age Always
- 37 (Min/Max 16/46)
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always
- 8504
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always
- 0
193 Load_Cycle_Count 0x0032 035 035 000 Old_age Always
- 656598
194 Temperature_Celsius 0x0002 063 054 000 Old_age Always
- 37 (Min/Max 16/46)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always
- 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always
- 1
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always
- 677
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/5262feb1.4090...@yahoo.ca