I installed the lvm and its dependencies, it shows /local-premount/lvm: not found
problem persists ... On Thu, Oct 16, 2014 at 8:25 PM, lina <lina.lastn...@gmail.com> wrote: >> * Add "break=premount" to the end of your kernel commandline and boot > > At the grub stage, there is no reaction to the "e" or "c" I pressed. > >> * If you have panic=<something> set, remove it. For some reason, >> those two options conflict and you won't get a shell, even though >> you explicitly asked for one >> * The initramfs will break out to a shell before any file systems are >> mounted. >> * At the shell run "lvm vgchange -ay". This will make all your LVM LVs >> available >> * Press Ctrl+D to exit the shell and continue booting. >> * With the system now up (hopefully), create the following file as >> /etc/initramfs-tools/scripts/local-premount/lvm >> #!/bin/sh >> >> lvm vgchange -ay >> * Make the file executable (chmod +x ...) >> * Rebuild the initramfs with "sudo update-initramfs -u" >> >> Your system should now boot reliably. >> >>> >>> On Thu, Oct 16, 2014 at 5:47 PM, lina <lina.lastn...@gmail.com> wrote: >>> > It doesn't mount the /usr /var /tmp >>> > >>> > Timed out waiting for device dev-disk-by\x ... >>> > Dependency failed for /var >>> > >>> > >>> > On Thu, Oct 16, 2014 at 5:29 PM, lina <lina.lastn...@gmail.com> wrote: >>> >> On Thu, Oct 16, 2014 at 4:55 PM, Chris Bannister >>> >> <cbannis...@slingshot.co.nz> wrote: >>> >>> On Thu, Oct 16, 2014 at 01:00:21PM +0800, lina wrote: >>> >>>> Any suggestions about >>> >>>> >>> >>>> failed to start remount root and kernel file system >>> >>>> >>> >>>> Is it due to updating issue? some package like systemd, or util-linux? >>> >>>> >>> >>>> Jessie box. >>> >>> >>> >>> Dunno. Is it an fstab issue? I'm only guessing here because you haven't >>> >>> given us much information. What is the actual error message? >>> >> >>> >> dove systemd[1]: /usr appears to be on its own filesystem and is not >>> >> already mounted, this is not a supported setup. >>> >> >>> >> >>> >> # /etc/fstab: static file system information. >>> >> # >>> >> # Use 'blkid' to print the universally unique identifier for a >>> >> # device; this may be used with UUID= as a more robust way to name >>> >> devices >>> >> # that works even if disks are added and removed. See fstab(5). >>> >> # >>> >> # <file system> <mount point> <type> <options> <dump> <pass> >>> >> proc /proc proc defaults 0 0 >>> >> # / was on /dev/sda5 during installation >>> >> UUID=2a687c3c-ffb4-4577-9781-beb6b88eb71b / ext4 errors=remount-ro 0 1 >>> >> # /backup was on /dev/sda14 during installation >>> >> UUID=114ea034-62b3-4266-b80f-e8bd43c90bfe /mnt/backup ext4 >>> >> defaults,noauto 0 2 >>> >> # /boot was on /dev/sda4 during installation >>> >> UUID=f38f09c1-8cc3-485f-8235-1b23fc26fcc9 /boot ext4 defaults 0 2 >>> >> # /home was on /dev/sda7 during installation >>> >> UUID=c826cf6e-a284-4741-a8e4-89b75991d801 /home ext4 defaults 0 2 >>> >> # /scratch was on /dev/sda13 during installation >>> >> UUID=25ad7887-39b1-4375-b9aa-0840cb84cb75 /scratch ext4 defaults 0 2 >>> >> # /tmp was on /dev/sda8 during installation >>> >> UUID=ba00a966-7352-4749-b478-788fea4f1a83 /tmp ext4 defaults 0 2 >>> >> # /usr was on /dev/sda9 during installation >>> >> UUID=49ce4cbd-7ac8-4b2d-84da-85143d214ee3 /usr ext4 defaults 0 2 >>> >> # /usr/local was on /dev/sda10 during installation >>> >> UUID=f013d06c-641d-4340-a620-9aeb3ce9a356 /usr/local ext4 defaults 0 2 >>> >> # /var was on /dev/sda11 during installation >>> >> UUID=4c106bc2-cb98-4795-9cff-6da66d0da771 /var ext4 defaults 0 2 >>> >> # /var/local was on /dev/sda12 during installation >>> >> UUID=97068b98-deae-4d79-baa1-0e3110aa18b6 /var/local ext4 defaults 0 2 >>> >> # swap was on /dev/sda6 during installation >>> >> UUID=0dc0ac69-7e3a-43d5-8582-aac085053f83 none swap sw 0 0 >>> >> /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 >>> >> # mac was on /dev/sda2 >>> >> /dev/sda2 /mnt/mac hfsplus ro,nouser,noauto,noexec 0 0 >>> >> >>> >>> >>> >>> I haven't had to diagnose any systemd booting issues, yet, cause it >>> >>> hasn't failed. So have you any strange configurations --- do you need to >>> >>> mount anything over nfs, for example. >>> >>> >>> >>> Is this your laptop? Is it encrypted? >>> >> >>> >> laptop, no encrypted >>> >> >>> >>> >>> >>> All these are just guesses, but hopefully someone will be able to help >>> >>> if they know the error messages etc. >>> >>> >>> >>> Oh, is this a new Jessie box, *OR*, have you been running Jessie for a >>> >>> while and the latest update caused this? >>> >>> >>> >> I have been running Jessie for a long period. Yes, it is caused by the >>> >> last update of the systemed and util-linux. >>> >>> >>> -- >>> To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org >>> with a subject of "unsubscribe". Trouble? Contact >>> listmas...@lists.debian.org >>> Archive: >>> https://lists.debian.org/CAG9cJm=wbbkadygkng4yqs6quu32+ekubbf78fnfy-imbmp...@mail.gmail.com >>> -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/CAG9cJm=7ifppv0cr_xcy6bjood8dk_rgrdjo4b-o+mkcchy...@mail.gmail.com