On 10/23/2014 09:58 PM, Michael Biebl wrote: > Am 24.10.2014 um 04:19 schrieb Michael Biebl: > >> For some reason, you seem to be getting acpi events which trigger the >> suspend request in logind. This might be a buggy ACPI implementation >> like in [1]. > > To further debug this, you might install the "evtest" package and run > the evtest binary as root. > Please post the shown list > You might get an entry like "/dev/input/event1: Lid Switch"
I do have this. > If you select that event number (1), do you get any lid switch events > event though the lid is not closed or when the lid switch is closed? > Do you have other input devices which generate the SW_LID event? > You can try them one by one. Sure. I am not familiar with this tool so I am not sure what I am looking at currently. Thus, here is what I did: * I tested the Lid Switch by closing and opening the lid; the screen turns off then back on again. * I tested the Sleep Button; nothing happened * I tested Power Button 3; nothing happened * I tested Power Button 4; result below. Do I need to remove those entries I put in /etc/systemd/logind.conf? I worry if I do remove them, then I won't get a good test... root@Senta:~# evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: AT Translated Set 2 keyboard /dev/input/event1: Lid Switch /dev/input/event2: Sleep Button /dev/input/event3: Power Button /dev/input/event4: Power Button /dev/input/event5: Video Bus /dev/input/event6: PC Speaker /dev/input/event7: HDA Digital PCBeep /dev/input/event8: SynPS/2 Synaptics TouchPad Select the device event number [0-8]: 1 Input driver version is 1.0.1 Input device ID: bus 0x19 vendor 0x0 product 0x5 version 0x0 Input device name: "Lid Switch" Supported events: Event type 0 (EV_SYN) Event type 5 (EV_SW) Event code 0 (SW_LID) Properties: Testing ... (interrupt to exit) Event: time 1414121647.010196, type 5 (EV_SW), code 0 (SW_LID), value 0 Event: time 1414121647.010196, -------------- EV_SYN ------------ ^C root@Senta:~# evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: AT Translated Set 2 keyboard /dev/input/event1: Lid Switch /dev/input/event2: Sleep Button /dev/input/event3: Power Button /dev/input/event4: Power Button /dev/input/event5: Video Bus /dev/input/event6: PC Speaker /dev/input/event7: HDA Digital PCBeep /dev/input/event8: SynPS/2 Synaptics TouchPad Select the device event number [0-8]: 2 Input driver version is 1.0.1 Input device ID: bus 0x19 vendor 0x0 product 0x3 version 0x0 Input device name: "Sleep Button" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 142 (KEY_SLEEP) Properties: Testing ... (interrupt to exit) ^C root@Senta:~# evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: AT Translated Set 2 keyboard /dev/input/event1: Lid Switch /dev/input/event2: Sleep Button /dev/input/event3: Power Button /dev/input/event4: Power Button /dev/input/event5: Video Bus /dev/input/event6: PC Speaker /dev/input/event7: HDA Digital PCBeep /dev/input/event8: SynPS/2 Synaptics TouchPad Select the device event number [0-8]: 3 Input driver version is 1.0.1 Input device ID: bus 0x19 vendor 0x0 product 0x1 version 0x0 Input device name: "Power Button" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 116 (KEY_POWER) Properties: Testing ... (interrupt to exit) ^C root@Senta:~# evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: AT Translated Set 2 keyboard /dev/input/event1: Lid Switch /dev/input/event2: Sleep Button /dev/input/event3: Power Button /dev/input/event4: Power Button /dev/input/event5: Video Bus /dev/input/event6: PC Speaker /dev/input/event7: HDA Digital PCBeep /dev/input/event8: SynPS/2 Synaptics TouchPad Select the device event number [0-8]: 4 Input driver version is 1.0.1 Input device ID: bus 0x19 vendor 0x0 product 0x1 version 0x0 Input device name: "Power Button" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 116 (KEY_POWER) Properties: Testing ... (interrupt to exit) Event: time 1414121702.744549, type 1 (EV_KEY), code 116 (KEY_POWER), value 1 Event: time 1414121702.744549, -------------- EV_SYN ------------ Event: time 1414121702.744566, type 1 (EV_KEY), code 116 (KEY_POWER), value 0 Event: time 1414121702.744566, -------------- EV_SYN ------------ ^C root@Senta:~# Thanks!
signature.asc
Description: OpenPGP digital signature