Gene Heskett wrote: > Bob Proulx wrote: > > You might want to use parted for alignment checks. > >... > > root@phobia:~# parted /dev/sda align-check opt 1 > > 1 aligned > > root@phobia:~# parted /dev/sda align-check opt 5 > > 5 aligned > > > > root@turmoil:~# parted /dev/sda align-check opt 1 > > 1 not aligned > > Had to install it, but it agrees, although the last example you show is > confusing, Here I get the 2 not aligned, but your paste says 1.
You should be ignoring partition 2. You aren't using it. It is the extended partition which holds your next logical partition. I was showing example usage of the tool and showing it returning results both positive and negative for the example. My partition 1 is unrelated to your partition 2 as they are different systems. Notice the machine names are names of machines on my network and not in any way related to your system. Unless by happenstance you and I chose the same system names. :-) You should try 'cfdisk' and look at what it displays. Here is an example of the cfdisk output from a system here. # cfdisk Name Flags Part Type FS Type [Label] Sectors ------------------------------------------------------------------------------ Primary Free Space 2048* sda1 Primary linux_raid_m 997376* Pri/Log Free Space 2046* sda5 NC Logical linux_raid_m 488280066* Note that it doesn't display sda2. If you had been using cfdisk instead of fdisk you would never even have seen sda2 and therefore would not have noticed it. I think the cfdisk folks made a good design choice there. It is there as an extended partition. But cfdisk does not display it. Because it isn't used as such. It is the way to encapulate logical partitions that you do use. # parted /dev/sda unit s print Number Start End Size Type File system Flags 1 2048s 999423s 997376s primary ext2 raid 2 1001470s 3907028991s 3906027522s extended 5 1001472s 489281535s 488280064s logical raid That is the same system and a different dump of the same partition table. I have always really liked using cfdisk in the past. I hope it gets some love and attention to keep up to date with new formats too. Oh, maybe it is getting attention because when I look at a newer system I see this: # cfdisk (in Sid today) Device Boot Start End Sectors Size Id Type /dev/sda1 63 996029 995967 486.3M fd Linux raid autod /dev/sda2 996030 1953520064 1952524035 931G 5 Extended |-/dev/sda5 996093 489275639 488279547 232.8G fd Linux raid autod |-/dev/sda6 489275703 1114268399 624992697 298G fd Linux raid autod `-/dev/sda7 1114268463 1953520064 839251602 400.2G fd Linux raid autod I see cfdisk is now showing the partitions in a tree display. This is an older system that has been upgraded through many major releases and it is showing that it is older 512 byte alignment. > 1. So it seems I have been barking at the moon. Yes. :-( > But my first install on one of these new 4k/sector drives suffered > from 20 meg a second drive performance, so I was an early victim. Very likely if you were using an older installer that didn't know about the new 4k AF drives. That older software would have partitioned things as they were done before. That was a problem for all installers when the new 4k AF drives first appeared because none of the installers had code to handle it until later. Of course that would have had nothing to do with the Debian Wheezy 7 installer. > A Mandrake install IIRC. I liked it, but then they went toes up. So > at that point I went back to the same install I am using on my cnc > machines so that I could write gcode from a warm comfy chair as > apposed to standing up at the keyboards of those machines. > > Now this install is compatible with those, I share all 3 machines with each > other via nfs to move code, and with an rt-pre-empt kermel I can at least > run the simulation to check the correctness of my code while carving > imaginary air. It sounds like you have been having fun. Note however that none of those things have anything to do with the Debian Wheezy 7 installer that you have been complaining about here in this thread. > I have other problems that I may ask about, but lets put a ~30~ on this > thread If ~30~ means stop complaining in this thread about the Debian Wheezy 7 installer not being able to handle AF 4k drives then yes let's do that. :-) > 2. I am finally having a conversation with somene who does appear to be > familiar with the subject/problem, There is no substitute for face to face conversation with friendly and knowledgeable people. With emphasis on the knowledgeable part. The sales people in Best Buy are friendly. But I stick my fingers in my ears and hum when I walk around there to avoid the anti-knowledgeable part. Finding a local user group or other gathering is a way way to get shared knowledge from the community. When face to face misconceptions can be seen and addressed more easily. I definitely recommend people get with user groups for real life conversations. > and I thank you very much, Bob. Happy to help. Bob
signature.asc
Description: Digital signature