Il 19/09/20 10:03, Fabien Roucaute ha scritto:
Le 19/09/2020 à 08:21, Lucio Crusca a écrit :
Il 19/09/20 00:54, Dan Ritter ha scritto:
auto eno1
iface eno1 manual
auto virbr10
iface virb10 inet static
bridge_ports eno1
bridge_stp off
address 2.4.6.8
netmask 255.255.255.224
gateway 2.4.6.1
the bridge eats the eno1 interface.
Using that configuration it actually brings up eno1 with the correct IP
address, but I have no bridge at all:
# ifconfig -a
eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 2.4.6.8 netmask 255.255.255.224 broadcast 2.4.6.31
[...]
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
[...]
# brctl show
#
I'm puzzled: how does it manage to work if there's no bridge at all?
eno1 still has an IP address, try to shut it down and up with 'ifdown
eno1;ifup eno1' and see if it still have an IP.
Sorry, I forgot to mention the situation above is what I get after reboot.
