Stephen P. Molnar wrote: > > On 7/6/23 12:56, Dan Ritter wrote: > > Stephen P. Molnar wrote: > > > On 7/6/23 09:30, Dan Ritter wrote: > > > > Stephen P. Molnar wrote: > > > > > > > > A properly working Radeon driver suggests that the only issue is > > > > a problem getting the EDID mode information from the monitor. > > > > > > > > Options: > > > > > > > > - Force the mode > > > > - Swap from VGA to some other cable (HDMI, DVI) depending on > > > > what the monitor has. > > > > - Write a custom modeline > > > > > > > > If you have an appropriate cable handy, that will be fastest and > > > > easiest. > > > > > > > > -dsr- > > > > > > > Thanks for the reply. > > > > > > I changed the cable and get the same results. > > To HDMI or DVI? > > > > What's the output of > > xrandr > > with the current low-res setup? > > > Here is > > (base) comp@AbNormal:~$ xrandr > Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192 > HDMI-0 disconnected (normal left inverted right x axis y axis) > DVI-0 disconnected (normal left inverted right x axis y axis) > VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x > 0mm > 1024x768 60.00* > 800x600 60.32 56.25 > 848x480 60.00 > 640x480 59.94
This is still VGA. You have not swapped the cable for an HDMI or DVI cable. Start there. -dsr-
