Following the HOWTO's I try to mount my digital USB camera in the following way:
sudo mount -t vfat /dev/sda1 /camera mount: /dev/sda1 is not a valid block device The mount table has: none on /proc/bus/usb type usbdevfs (rw,devuid=0,devgid=107,devmode=0660) /proc/bus/usb/devices does see: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b0 ProdID=0116 Rev= 1.00 S: Manufacturer=NIKON S: Product=NIKON DSC E2100 S: SerialNumber=000004652474 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=50 Driver=usb-storage E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I got the following relevant modules loaded: usb-storage 46360 0 (autoclean) (unused) usb-uhci 21132 0 (unused) usbcore 55360 1 [usb-storage usb-uhci] scsi_mod 91660 2 [usb-storage ide-scsi] ide-scsi 8752 0 scsi_mod 91660 2 [usb-storage ide-scsi] This works with kernels up to 2.4.19, but I don't get it working with later 2.4 kernels. What is wrong? -- #>!$!%(@^%#%*(&([EMAIL PROTECTED]@^$##*#@&(%)@**$!(&!^(#((#&%!)%*@)(&$($$%(@#)&*!^$)[EMAIL PROTECTED]@) Tom "thriving on chaos" Peters -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]