Daniel Baumann wrote: >> What do you mean by "fails to display" ? It refuses the mode? >> > > it refuses the mode and, whatever is written in xorg.conf, only displays > 640x680. >
Your xorg.conf uses the old syntax, you are now using a randr-1.2-aware driver, the way to select a mode has changed, see below. > Section "Device" > Identifier "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset > Integrated Graphics Device" > Driver "intel" > Option "UseFBDev" "true" > EndSection > (your log says that UseFBDev is ignored) > Section "Monitor" > Identifier "Standardbildschirm" > Option "DPMS" > HorizSync 31-61 > VertRefresh 56-75 > EndSection > You should drop HorizSync and VertRefresh. > Section "Screen" > Identifier "Default Screen" > Device "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset > Integrated Graphics Device" > Monitor "Standardbildschirm" > DefaultDepth 16 > SubSection "Display" > Modes "1024x768" > EndSubSection > EndSection > You should drop the Modes line, it's probably ignored with your server/driver. > (II) intel(0): Modeline "640x350"x70.1 25.18 640 688 784 800 350 410 412 > 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1024x768"x74.9 82.00 1024 1088 1192 1360 768 771 > 775 805 -hsync +vsync (60.3 kHz) > (II) intel(0): Modeline "1024x768"x69.8 75.25 1024 1080 1184 1344 768 771 > 775 802 -hsync +vsync (56.0 kHz) > (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 > 777 806 -hsync -vsync (56.5 kHz) > (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 > 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 > 775 798 -hsync +vsync (47.8 kHz) > (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 > 666 +hsync +vsync (48.1 kHz) > (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 > 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x74.9 49.00 800 840 920 1040 600 603 607 > 629 -hsync +vsync (47.1 kHz) > (II) intel(0): Modeline "800x600"x72.0 47.00 800 840 920 1040 600 603 607 > 628 -hsync +vsync (45.2 kHz) > (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 > 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 > 624 -hsync +vsync (37.4 kHz) > (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 > 625 +hsync +vsync (35.2 kHz) > (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 > 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 > 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x74.8 30.75 640 664 728 816 480 483 487 > 504 -hsync +vsync (37.7 kHz) > (II) intel(0): Modeline "640x480"x71.9 29.50 640 664 728 816 480 483 487 > 503 -hsync +vsync (36.2 kHz) > (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 > 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 > 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Output VGA connected > (II) intel(0): Output VGA using initial mode 640x350 > There seem to be plenty of video modes that are available. > Screen 0: minimum 320 x 200, current 640 x 350, maximum 1024 x 1024 > VGA connected 640x350+0+0 (normal left inverted right) 304mm x 228mm > 640x350 70.1*+ > 1024x768 74.9 69.8 70.1 60.0 59.9 > 800x600 72.2 75.0 74.9 72.0 60.3 59.9 56.2 > 640x480 75.0 72.8 74.8 71.9 60.0 > 720x400 70.1 > What does *exactly* happen if you do xrandr --output VGA --mode 800x600 ? or 1024x768 ? What kind of monitor is connected to which port? Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]