Si c'est comme pour moi, c'est un problème de version recensé chez mandrake, il faut télécharger les nouvelles versions des rpms pour xcdroast-mkisofs-cdrecord...
Gauier. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, September 29, 2002 7:49 PM Subject: [debutant] Gravure avec Xcdroast : encore un problème mais le bout est proche :-) > > Salut à tous!!!!! > > J'ai un problème pour graver avec xcdroast. J'ai installé la Mandrake 8.2 > puis, comme j'ai un graveur IDE, j'ai fait une émulation SCSI de la façon > suivante : > ajout de append="hdb=ide-scsi" dans /etc/lilo.conf puis j'ai tapé sous la > console /sbin/lilo -v puis modprobe ide-scsi puis reboot. > > Pour avoir les messages de boot je lance dmesg, et visiblement mon graveur > est bien émulé en scsi. > Adding Swap: 248968k swap-space (priority -1) > SCSI subsystem driver Revision: 1.00 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > --------------------------------------------------------- > Vendor: MITSUMI Model: CR-4804TE Rev: 2.4C > Type: CD-ROM ANSI SCSI revision: 02 > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > parport0: PC-style at 0x378 [PCSPP,EPP] > IPVS: Connection hash table configured (size=4096, memory=32Kbytes) > IPVS: ipvs loaded. > es1371: version v0.30 time 03:23:01 Mar 15 2002 > PCI: Found IRQ 10 for device 00:0d.0 > es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08 > es1371: found es1371 rev 8 at io 0xb800 irq 10 > es1371: features: joystick 0x0 > PCI: Setting latency timer of device 00:0d.0 to 64 > ac97_codec: AC97 Audio codec, id: 0x4352:0x5913 (Cirrus Logic CS4297A rev A) > Splash status on console 0 changed to off > Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 > --------------------------------------------------------- > sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.12 > > > Pour vérifier, je lance la commande mount et on voit que le graveur de cdrom > est connu comme /dev/scd0 et plus comme /dev/hdb : > [root@localhost yukio]# mount > /dev/hda1 on / type ext3 (rw) > none on /proc type proc (rw) > none on /dev type devfs (rw) > none on /dev/pts type devpts (rw,mode=0620) > none on /dev/shm type tmpfs (rw) > /dev/hda6 on /home type ext3 (rw) > /mnt/cdrom on /mnt/cdrom type supermount > (ro,dev=/dev/scd0,fs=iso9660,--,iocharset=iso8859-15) > -------------------------------------------------------------------------- --------------------/mnt/floppy on /mnt/floppy type supermount > (rw,sync,dev=/dev/fd0,fs=vfat,--,iocharset=iso8859-15,umask=0,codepage=850) > [root@localhost yukio]# > > > > Quand je lance xcdroast sous root j'ai des warnings mais dans l'écran de > configuration j'ai bien mon graveur de reconnu : > [root@localhost yukio]# xcdroast & > [2] 2223 > [1] Done xcdroast > [root@localhost yukio]# > ** WARNING **: Installation problem? No set-uid bit on /usr/bin/mkisofs > ** WARNING **: Installation problem? No set-uid bit on /usr/bin/readcd > ** WARNING **: Installation problem? No set-uid bit on /usr/bin/cdda2wav > [root@localhost yukio]# > > > > Quand je veux graver une image ISO ( obtenue sous xcdroast avec l'option > Mastérisation de l'image ) > j'ai les messages suivants sous xcdroast. Est-ce que scsidev: '0,0,0' > signifie qu'il y a pas de graveur scsi reconnu? > Le mode choisi dans l'onglet Ecrire Pistes Track at Once ( TAO ), et le > bouton que je clique est "Fixer uniquement CD-R-RW ) plutôt que Ecrire les > pistes qui ne marche pas. > > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.1.22 > Cdrecord 1.11a15 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 Jörg > Schilling > TOC Type: 1 = CD-ROM > Using libscg version 'schily-0.5' > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'MITSUMI ' > Identifikation : 'CR-4804TE ' > Revision : '2.4C' > Device seems to be: Philips CDD-522. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO > Supported modes: TAO PACKET RAW/R16 RAW/R96R > Drive buf size : 1343488 = 1312 KB > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 4 > Is not unrestricted > Is not erasable > ATIP start of lead in: -11660 (97:26/40) > ATIP start of lead out: 336225 (74:45/00) > Disk type: Long strategy type (Cyanine, AZO or similar) > Manuf. index: 6 > Manufacturer: FUJI Photo Film Co., Ltd. > Blocks total: 336225 Blocks current: 336225 Blocks remaining: 336375 > RBlocks total: 346210 RBlocks current: 346210 RBlocks remaining: 346360 > Starting to write CD/DVD at speed 4 in write mode for single session. > 0 seconds. Operation starts. > Performing OPC... > Writing time: 1.196s > Fixating... > Fixating time: 0.004s > > J'ai un message dans une fenêtre disant que tous s'est bien passé mais on > grave pas 300 mégas en 0 secondes :-)) > Après je fais > [yukio@localhost tmp]$ ls /mnt/cdrom/ > ls: /mnt/cdrom/: Erreur d'entrée/sortie > > bref ça marche pas mais je dois pas en être loin :-)) > > > > ---------------------------------------------------------------------------- ---- > Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft? > Rendez-vous sur "http://www.mandrakestore.com" >
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft? Rendez-vous sur "http://www.mandrakestore.com"