Not sure if this would really work, but you could send it to a separate mailbox using the ROUTETO function by putting [EMAIL PROTECTED] Will this work if it is to the same user? Might be a way around the problem?
Sincerely, Grant Griffith EI8HT LEGS Enhanced Web Management A Division of ETC http://www.getafreewebsite.com 877-483-3393 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jason @ AreaTech Sent: Tuesday, June 29, 2004 4:44 PM To: [EMAIL PROTECTED] Subject: Re: [Declude.JunkMail] Messages slipping through JM ----- Original Message ----- From: "Grant Griffith - Declude JM" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 29, 2004 4:19 PM Subject: RE: [Declude.JunkMail] Messages slipping through JM > Why not use the command in Declude to do this directly? In looking at the > manual it appears to be ROUTETO <email address>. You could do this for the > WEIGHT20 Piece. I'm not sending all WEIGHT20 to a separate e-mail address. I'm shooting it to a sub mailbox. For this I would use the MAILBOX action, and that requires PRO which we do not have..... Jason --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
